Home | Classifieds | History | Technical | Links | Store | About Us | Email
Topics Topics Edit Profile Profile Help/Instructions Help Member List Register  
Search Last 1|3|7 Days Search Search Tree View Tree View  

Engine for Hoosier Girl

Old Marine Engine » Multi Cylinder Gas Inboards » Engine for Hoosier Girl « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

andrew
Moderator
Username: andrew

Post Number: 1327
Registered: 11-2001


Posted on Thursday, January 12, 2006 - 02:07 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

The following came in by email. I will ask Dana to check her for responses, and add additional info if possible... neat project!

She doesn't actually say what engine it is... maybe she can post the nameplate data below.

quote:

Hello,

My name is dana wolfe hildebrand and I am the Great Granddaughter of JW Whitlock, an early boat designer/racer (The Hoosier Boy, most notably). I'm on the Board of Directors for the Ohio County Historical Society in Rising Sun, Indiana and we house The Hoosier Boy -- and now The Hoosier Girl. When the Hoosier Girl came in, her engine came separate. In the past two years, the engine has become very rusty. Now, our facilities are sincerely lacking and space is at a premium. The garage in which the engine, and the two boats, are housed leaks air from the outside, though there appears to be no leaks in the roof.

Nevertheless, the engine is being eaten away very quickly and we wanted to elicit some advice from those who know more than we do, hence this letter. Do you have any words of wisdom for us? We would sincerely appreciate any thoughts you might have on the subject.

I'm sending you a rather large picture of the engine, but I thought you might want to see the details. We have to maintain the integrity of the artifact, while at the same time, making sure that it doesn't fall apart on us!

Most sincerely,

dana wolfe hildebrand
[email protected]



hossier_girl
Top of pagePrevious messageNext messageBottom of page Link to this message

miro
Senior Member
Username: miro

Post Number: 205
Registered: 11-2001
Posted on Friday, January 13, 2006 - 05:53 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

The exterior is really not an issue. It is the cylinder walls and the crankcase that matter most.
If you can, make sure there is no water in either the cylinders or the crankcase.
If there is water, see if you can dry it out. For the cylinders, blow compressed air in using a short tube - like a lance to get dry air in there though the spark plug hole.
For the crankcase, there may be a breather or the certainly the valve guide covers will come off, so that you can have a look-see ( hopefully there is residual oil in there only)
I would NOT try to turn the engine flywheel just yet.
For more major invasive efforts, the head would have to be removed - not a trivial excercise.

I have found that WD40 will displace water quite well.

Looks as if you have a good project on your hands.
miro
Top of pagePrevious messageNext messageBottom of page Link to this message

dana wolfe hildebrand
Visitor
Posted on Friday, January 13, 2006 - 10:34 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Hi all...

I'm going to see if I can get you some more info off the motor this weekend. I should have said we are not planning on restoring the motor; instead, we are a museum that believes in letting the artifact alone. However, in this case, the rust is rapidly spreading. If we don't do something, there will be no artifact left to preserve. Everything is touched with gloves, even this motor. But, we MUST do something.......
Top of pagePrevious messageNext messageBottom of page Link to this message

dana wolfe hildebrand
Visitor
Posted on Friday, January 13, 2006 - 10:37 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Here's a pic of the Hoosier Girl in its hey dey.

The Hoosier Girl
Top of pagePrevious messageNext messageBottom of page Link to this message

dana wolfe hildebrand
Visitor
Posted on Friday, January 13, 2006 - 10:50 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I do have a partial pic of a tag that's on the engine, if it helps anyone ???

dana

Engine Tag
Top of pagePrevious messageNext messageBottom of page Link to this message

andrew
Moderator
Username: andrew

Post Number: 1331
Registered: 11-2001


Posted on Saturday, January 14, 2006 - 11:57 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Dana,

Thanks for posting the additional info. Can you get the rest of the data off the name tag above and post it here? If so we can probably supply additional info on the engine. I assume that the bottom part says
"MOTOR BUILT BY LYCOMBING MANUFACTURING CO., WILLIAMSPORT, PENNA"

1


Others here could give you more detailed info than I can... but you are correct that the engine could deteriate quickly if you do nothing. In order to preserve it you will have to do some work on it. Done properly you will not be disturbing it's original characteristics.

As Miro mentiones you must make sure that the cylinders, crankcase, and cooling water passages (maybe the most difficult) are free of water and coated with oil or penetrant, and the water passages are plugged and fully filled with anti-freeze or other rust inhibitor.

You will need the assistance of the right mechanic or old engine nut. Maybe one of the regulars here lives near your location, or maybe you might have to find the right person in your organization or locally.

If you are only tying to make a static display it is not going to be too difficuly, but you still must address the rust that is likely occuring from the inside of the engine.
Top of pagePrevious messageNext messageBottom of page Link to this message

dana wolfe hildebrand
Visitor
Posted on Saturday, January 14, 2006 - 12:06 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Does anyone have an idea of how old (year) this engine is?
Top of pagePrevious messageNext messageBottom of page Link to this message

dana wolfe hildebrand
Visitor
Posted on Saturday, January 14, 2006 - 12:16 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Thank you, Miro and Andrew, for the good advice!

OK...I'm going to show my ignorance here, but I'm happy to do so in the interest of information! I understand that the Lycoming Co. made marine and car engines. Which do we have here? The other boat (The Hoosier Boy) has a Liberty aircraft engine in it. Even if we can't afford to do what we need to do to the Girl's engine, it would be wonderful to get any historical information that might be out there. I'm relying heavily on others -- experts like all of you!!

Thanks.........d
Top of pagePrevious messageNext messageBottom of page Link to this message

bruce
Senior Member
Username: bruce

Post Number: 301
Registered: 07-2002
Posted on Saturday, January 14, 2006 - 01:32 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Dana, as a race boat engine installation; this motor could well have been installed in a v-drive configuration. Note the splined drive shaft with the universal joint. It is also possible that a marine gear was not installed in order to save weight. The hull drawings if still in the family would give a clear picture of the intended design. I would hope that something good soon comes to this wonderful example of racing history. I suggest contacting the American Power Boat Association : APBA.com They have extensive records in their Antique racing division. Also raceboat authority Thomas Mittler at [email protected] who isn't far away in Indiana.
Top of pagePrevious messageNext messageBottom of page Link to this message

dana wolfe hildebrand
Visitor
Posted on Saturday, January 14, 2006 - 08:33 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Here's another one that the museum has always had, but no one seems to know anything about it. It says "Scripps" on the tag.

Another engine
Top of pagePrevious messageNext messageBottom of page Link to this message

dana wolfe hildebrand
Visitor
Posted on Sunday, January 15, 2006 - 02:29 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Ok, the two posts following will have the information on the two engines. First, here's the rest of the tag from the Hoosier Girl motor:

HG engine tag
Top of pagePrevious messageNext messageBottom of page Link to this message

dana wolfe hildebrand
Visitor
Posted on Sunday, January 15, 2006 - 02:35 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

.....and here's the tag from the Scripps motor.

Scripps motor tag
Top of pagePrevious messageNext messageBottom of page Link to this message

dana wolfe hildebrand
Visitor
Posted on Sunday, January 15, 2006 - 02:39 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

A little info I found about the engine at the museum. Anyone got anything more for me? Thanks!

More info from the HG engine.
Top of pagePrevious messageNext messageBottom of page Link to this message

bruce
Senior Member
Username: bruce

Post Number: 303
Registered: 07-2002
Posted on Sunday, January 15, 2006 - 04:26 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Dana, Contact Robert Henkel at [email protected] The Henkel family purchased the remains of the Scripps Engine company years back and are a recognised authortity on Scripps marine engines. Sorry, I couldn't see the Joes gear in the Auburn/lycoming picture from before.
Top of pagePrevious messageNext messageBottom of page Link to this message

foxman
Visitor
Posted on Sunday, January 22, 2006 - 08:40 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Dana

I was very interested to read about your project. I don't know much about Hoosier Girl but my eyebrows went up when you said your organization has Hoosier Boy in its collection!

Is this the 40 foot long displacement hull Gold Cup raceboat that appeared several times in the 1910 Power Boating Magazine?

In 1910 the Buffalo Engine Company built two prototype 250 hp V-8 engines, modelled to some degree on the Crane-Whitman engine from Dixie II. One was installed in Hoosier Boy and the other in a boat from our area (Brockville Ontario) another 40 foot Gold Cup displacement raceboat called the "Insurgent".

Hoosier Boy got the good engine and won a number of races, Insurgent evidently got the dog; its engine exploded shortly before 1910 Gold Cup trials began. It would be great if you could post current pictures of Boy and Girl and even more so on the million to one chance that Boy still has its original Buffalo powerplant.

Hoosier Girl was apparently altered to a foward drive configuration in the 1930's judging by the photo, however, it still has a nice trim at speed. About your engine project; generally maintaining mechanical artifacts in original condition is problematic since unlike household memorabilia which is stored indoors, most boats and engines were left outdoors to rust and rot in the 1930's and 40's so this environmental damage is not indicative of its original appearance while in use. A little restorative TLC is imperative in maintaining essentially perishable items like old boats and motors and rather than diminshing their value ( as it would in the case of an original condition cabinet or bed) actually adds to the educational value of the item.

Thank you for you interesting article and best of luck with your projects.
Top of pagePrevious messageNext messageBottom of page Link to this message

andrew
Moderator
Username: andrew

Post Number: 1351
Registered: 11-2001


Posted on Sunday, January 22, 2006 - 08:52 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

See this link for an article that Dana wrote about Hoosier Boy.

Top of pagePrevious messageNext messageBottom of page Link to this message

dana wolfe hildebrand
Visitor
Posted on Sunday, January 29, 2006 - 07:32 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Foxman,

No, the Hoosier Boy that we have is the last of the line. There were five Boys, and the one we have is a 24 foot, stepped craft with a Libery onboard. There were two of the 40 foot displacement crafts, one of which was sold to someone in New York. The Girl, though, was modeled after the early Boys. The Boy's number was (and is) K-780, while the Girl's original number was K-781. Here they are...




Top of pagePrevious messageNext messageBottom of page Link to this message

dana wolfe hildebrand
Visitor
Posted on Sunday, January 29, 2006 - 07:37 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Here's one of the original Boys for you! :-)

Top of pagePrevious messageNext messageBottom of page Link to this message

Scott Peters
Visitor
Posted on Monday, February 13, 2006 - 02:37 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Hi Dana,
You might want to contact the Collections department at the Auburn-Cord-Duesenberg Museum, 1600 S. Wayne Street, Auburn, Indiana 46706 phone (260) 925-1444, to see if they have a production record for that Auburn engine. They also have lots of technical manuals and files related to the company. Good luck!
Top of pagePrevious messageNext messageBottom of page Link to this message

dana wolfe hildebrand
Visitor
Posted on Friday, May 19, 2006 - 09:43 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Update from dana:

Well, I've finally found out what what boat the Scripps engine was in. It was one of my Great Grandfather's boats -- the Greyhound. Here's a shot of her......She's the big one in the back.

The Greyhound

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Password:
E-mail:
Options: Automatically activate URLs in message
Action:

Administration Administration Log Out Log Out   Previous Page Previous Page Next Page Next Page

Home | Classifieds | History | Technical | Links | Store | About Us | Email
&copy 2005 OldMarineEngine.com, P.O. Box 188, Forest Dale, VT 05745-0188 • Phone: 802-247-4864 • All rights reserved.
   Marine Engine Seloc Repair Manual Lookup Tool

marine gas engine repair and restoration