Home | Classifieds | History | Technical | Links | Store | About Us | Email
Topics Topics Edit Profile Profile Help/Instructions Help Member List Register  
Search Last 1|3|7 Days Search Search Tree View Tree View  

Cable Steering

Old Marine Engine » Miscellaneous » Cable Steering « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

David-Woodworth
Visitor
Posted on Wednesday, January 02, 2013 - 03:26 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have a 1909 boat with 1910 Lockwood Ash with steering around the engine {aft of boat} I would like to add something near the bow too. the boat now has a drum with cable. Can I add another station or will i create to much resistance ? You can call me at 661 513 0524 west coast or email [email protected]. Thanks for your help
Top of pagePrevious messageNext messageBottom of page Link to this message

miro
Senior Member
Username: miro

Post Number: 648
Registered: 11-2001


Posted on Wednesday, January 02, 2013 - 05:08 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

The usual problem is that the steering is too loose. But in your case, I think you'd find that the steering will be stiffer than before, and eventually, you'll get used to it.
Just make sure that the wheel you use at the second steering station has a good , low friction bearing.
You'll also need to figure that you'll add at least 2 or 3 rounds around the second wheel drum.
In any event your boat doesn't sound like a speed demon, so you'll have plenty of time to steer away from any objectionable things that might be in your way.
Top of pagePrevious messageNext messageBottom of page Link to this message

rogerd
Member
Username: rogerd

Post Number: 10
Registered: 01-2010
Posted on Wednesday, January 02, 2013 - 05:27 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Have a two station steering system in a 19 foot canoe stern launch. No problems. I do use nylon rope kept very tight. I keep the nuts on the end of the wheel a bit tight so that when you set a course you dont have to hold the wheel all the time Regards Roger.

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Password:
E-mail:
Options: Automatically activate URLs in message
Action:

Administration Administration Log Out Log Out   Previous Page Previous Page Next Page Next Page

Home | Classifieds | History | Technical | Links | Store | About Us | Email
&copy 2005 OldMarineEngine.com, P.O. Box 188, Forest Dale, VT 05745-0188 • Phone: 802-247-4864 • All rights reserved.
   Marine Engine Seloc Repair Manual Lookup Tool

marine gas engine repair and restoration