Home | Classifieds | History | Technical | Links | Store | About Us | Email
Topics Topics Edit Profile Profile Help/Instructions Help Member List Register  
Search Last 1|3|7 Days Search Search Tree View Tree View  

St. Lawrence Engine.

Old Marine Engine » One and Two Cylinder Gas Inboards » St. Lawrence Engine. « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

denis_rouleau
Member
Username: denis_rouleau

Post Number: 19
Registered: 08-2011
Posted on Wednesday, June 05, 2013 - 09:30 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I found this St. Lawrence to be for sale and I will get to see it in a couple of days. Is the $750.00 asking price in line for such an engine or too much to pay? The serial number is 5441. How old is it?Here are some pictures:

http://buzzcoil.brinkster.net/MARINE/stlawrence5441a.jpg

http://buzzcoil.brinkster.net/MARINE/stlawrence5441b.jpg

http://buzzcoil.brinkster.net/MARINE/stlawrence5441c.jpg

http://buzzcoil.brinkster.net/MARINE/stlawrence5441d.jpg


Thanks!
Denis Rouleau
Top of pagePrevious messageNext messageBottom of page Link to this message

bruce
Senior Member
Username: bruce

Post Number: 382
Registered: 07-2002
Posted on Wednesday, June 05, 2013 - 09:18 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Looks like $750 to me if it turns over..
Top of pagePrevious messageNext messageBottom of page Link to this message

jb_castagnos
Senior Member
Username: jb_castagnos

Post Number: 807
Registered: 07-2002


Posted on Wednesday, June 05, 2013 - 09:35 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Dennis, there's a long discussion on here about the St Lawrence engines if you search it. This is the later one piece manifold, don't remember when they changed. There were some serial # to date guesses there also.
Top of pagePrevious messageNext messageBottom of page Link to this message

denis_rouleau
Member
Username: denis_rouleau

Post Number: 22
Registered: 08-2011
Posted on Sunday, June 09, 2013 - 09:41 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I pickrd up the St-Lawrence this afternoon. It has awsume compression! It features a Monarch brass carb and the flywheel is only 14 inches in diameter. Is this the smallest size engine St Lawrence made?

http://buzzcoil.brinkster.net/MARINE/stlawrence5441e.jpg

http://buzzcoil.brinkster.net/MARINE/stlawrence5441f.jpg

http://buzzcoil.brinkster.net/MARINE/stlawrence5441g.jpg

http://buzzcoil.brinkster.net/MARINE/stlawrence5441h.jpg

http://buzzcoil.brinkster.net/MARINE/stlawrence5441i.jpg
Top of pagePrevious messageNext messageBottom of page Link to this message

richarddurgee
Senior Member
Username: richarddurgee

Post Number: 3035
Registered: 11-2001
Posted on Monday, June 10, 2013 - 04:13 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

*
Any changes,updates or engines not listed,let me know !


St Lawrence Engine List 6/10/13

STL1
STL2
STL3


*
Top of pagePrevious messageNext messageBottom of page Link to this message

bcm
Advanced Member
Username: bcm

Post Number: 49
Registered: 11-2009
Posted on Tuesday, June 11, 2013 - 08:29 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Denis,

Go to this site www.goslowboat.com
Image at left is same engine as yours.
Image at right is smallest St Lawrence engine.
Note position of priming cup. Head on your engine is incorrectly positioned. Should be positioned 90 degrees clockwise.
Top of pagePrevious messageNext messageBottom of page Link to this message

tom
Advanced Member
Username: tom

Post Number: 33
Registered: 12-2002
Posted on Tuesday, June 11, 2013 - 09:38 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

About a month ago there was a St. Lawrence for sale in Little Hr., Newfoundland. I understand it was brought from Hamilton, Ont. and in original crate. Asking $3,500.
Top of pagePrevious messageNext messageBottom of page Link to this message

denis_rouleau
Member
Username: denis_rouleau

Post Number: 23
Registered: 08-2011
Posted on Tuesday, June 11, 2013 - 09:54 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Thanks for this info bcm! The St Lawrence being my only engine I can carry in my arms, made me think it could have been the smallest, but now I know it's not

Looking at: www.goslowboat.com I see these St Lawrence engines were restored and painted red in one case and green for the other 2. Mine has lots of black paint left but I can't tell if it left the Brockville factory in black or if a new coat of black paint was applied to this engine 50 or 60 years ago.

Can anyone tell me the color a St Lawrence should be. If black is the original color I will leave it alone; if not I will repaint it to the proper colors and polish the brass.

Thanks everyone!
Denis Rouleau
Top of pagePrevious messageNext messageBottom of page Link to this message

bgoss
Senior Member
Username: bgoss

Post Number: 202
Registered: 12-2007
Posted on Tuesday, June 11, 2013 - 11:44 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Denis,
I would say that your engine was likely repainted since it looks like there is black paint on the water pump. But yes, they did come out painted black from the factory as well - often with nickel on the head and flywheel rim.
Hope that doesn't muddy the waters...
Blair
Top of pagePrevious messageNext messageBottom of page Link to this message

denis_rouleau
Member
Username: denis_rouleau

Post Number: 26
Registered: 08-2011
Posted on Sunday, June 16, 2013 - 10:07 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

It has been one week since I got the St-Lawrence and here are pictures of it today:

http://buzzcoil.brinkster.net/St-Lawrence/page101.html

Denis Rouleau
Top of pagePrevious messageNext messageBottom of page Link to this message

jb_castagnos
Senior Member
Username: jb_castagnos

Post Number: 811
Registered: 07-2002


Posted on Sunday, June 16, 2013 - 08:01 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Dennis, the engine looks great, but it would be wise to remove the head and check to see if it is installed wrong. The primer cup is usually on the other side, front. These heads have a spill tube cast into them, water fills the head and spills over into a cast passage that mates with the outlet to the exhaust. If the head is in the wrong position water will never fill the head and it will run hot.
Top of pagePrevious messageNext messageBottom of page Link to this message

denis_rouleau
Member
Username: denis_rouleau

Post Number: 27
Registered: 08-2011
Posted on Sunday, June 16, 2013 - 08:24 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I'm confused! Bcm said that the head was on wrong when I got the engine last week. I took the head off and turned the head 90 degrees clockwise as seen in the latest pictures. Now Jb you still think the head is on wrong
There are only 4 positions the head can go on. 3 wrong ways and one correct way???

Denis Rouleau
Top of pagePrevious messageNext messageBottom of page Link to this message

jb_castagnos
Senior Member
Username: jb_castagnos

Post Number: 813
Registered: 07-2002


Posted on Sunday, June 16, 2013 - 11:38 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Denis, looks like you rotated it 180, should have went 90 degrees. When the head is off, match the small port over the exhaust with the one in the head, all of the engines I've seen had the primer on the fore port side, yours may be an exception.
Top of pagePrevious messageNext messageBottom of page Link to this message

qwilkin
Senior Member
Username: qwilkin

Post Number: 80
Registered: 08-2009
Posted on Monday, June 17, 2013 - 02:41 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Wow I read all the mail re the old engines and am so envious that you have so many . Would love to import one as we have very few old motors. I have ablaxland twin but would love an older single siylinder wonder what the cost of shipping is . Has any one any idea and where do I look to find one .

Quinton Australia
Top of pagePrevious messageNext messageBottom of page Link to this message

ernie
Senior Member
Username: ernie

Post Number: 1688
Registered: 01-2002


Posted on Monday, June 17, 2013 - 09:49 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

These heads are on correct.
As JB says forward port side
Hope this helps
Ernie
Yes the aft cylinder has an incorrect priming cup.
Top of pagePrevious messageNext messageBottom of page Link to this message

denis_rouleau
Member
Username: denis_rouleau

Post Number: 28
Registered: 08-2011
Posted on Monday, June 17, 2013 - 11:43 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I popped the head off on the St-Lawrence and took these pictures:

http://buzzcoil.brinkster.net/St-Lawrence/stl5441o.jpg

http://buzzcoil.brinkster.net/St-Lawrence/stl5441p.jpg

http://buzzcoil.brinkster.net/St-Lawrence/stl5441q.jpg

It now seems evident to me that there is only one position where the hole passages on the head matches those on the main casting. Interestingly, before a previous removal of the head someone had taken the time to make punch marks on the head and on the main casting to indicate how the head was to be put back on. Unfortunately he did not put the punch marks in the right place.

Denis Rouleau
Top of pagePrevious messageNext messageBottom of page Link to this message

jb_castagnos
Senior Member
Username: jb_castagnos

Post Number: 815
Registered: 07-2002


Posted on Monday, June 17, 2013 - 03:30 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Denis, does the primer end up in the normal spot?
Top of pagePrevious messageNext messageBottom of page Link to this message

denis_rouleau
Member
Username: denis_rouleau

Post Number: 29
Registered: 08-2011
Posted on Monday, June 17, 2013 - 05:33 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

JB, you tell me if the primer cup is in the normal spot. I don't know what should be normal. Here is the latest picture I just took after putting the head back on:

http://buzzcoil.brinkster.net/St-Lawrence/stl5441r2.jpg

I've indicated the 4 possible positions the head could go on. No.1 shows location of priming cup after I lined up the holes in the water passages. No.2 is the position the priming cup was in when I first got the engine. No. 3 and No. 4 are two other possibilities.

Denis Rouleau
Top of pagePrevious messageNext messageBottom of page Link to this message

jb_castagnos
Senior Member
Username: jb_castagnos

Post Number: 816
Registered: 07-2002


Posted on Monday, June 17, 2013 - 05:45 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Denis, #1 is correct. Did the head fit better? I thought the holes weren't symetrical, you had to force it on wrong.
Top of pagePrevious messageNext messageBottom of page Link to this message

denis_rouleau
Member
Username: denis_rouleau

Post Number: 30
Registered: 08-2011
Posted on Monday, June 17, 2013 - 06:36 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

The stud holes in the head are of equal distance as the head slips on just as easy in all positions.

Denis Rouleau
Top of pagePrevious messageNext messageBottom of page Link to this message

miro
Senior Member
Username: miro

Post Number: 702
Registered: 11-2001


Posted on Thursday, June 20, 2013 - 09:19 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Denis, if it is any consolation to yoju, the 2 cylinder St Lawrence that I got a couple of years ago, had the same issue about the position of the head. Even though it ran, I didn't run it for long and so avoided a bad result.
Fortunately, one of the boys on the OME web site, gave the same info that you received and I now have a good St Lawrence.

miro
Top of pagePrevious messageNext messageBottom of page Link to this message

philsboat
New member
Username: philsboat

Post Number: 2
Registered: 11-2013
Posted on Tuesday, June 24, 2014 - 07:31 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Bought a one cylinder St. Lawrence engine from a fellow near Elgin On. for $100.No serial # but it has a cast iron piston and solid bronze connecting rod.
It came with a cast iron muffler and bronze exhaust through hull.

Phil
Top of pagePrevious messageNext messageBottom of page Link to this message

4590wood
Visitor
Posted on Monday, March 06, 2017 - 01:19 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Hello,

Looks like this is an older conversation but if it's still going I have questions. I have a marine engine with a no of 6642. I haven't been able to find much info about it. If anyone knows anything about this model that would be great. Thanks No 6642
Top of pagePrevious messageNext messageBottom of page Link to this message

ernie
Senior Member
Username: ernie

Post Number: 2365
Registered: 01-2002


Posted on Monday, March 06, 2017 - 06:03 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Looks like a Model A Ford engine
At least that is what the distributor is.
Not sure on the cylinder head.
Top of pagePrevious messageNext messageBottom of page Link to this message

ned_l
Senior Member
Username: ned_l

Post Number: 106
Registered: 08-2012
Posted on Tuesday, March 07, 2017 - 07:24 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

My thought too about a Model A. Nice looking little engine. What sort of boat is it in???
Top of pagePrevious messageNext messageBottom of page Link to this message

bgoss
Senior Member
Username: bgoss

Post Number: 249
Registered: 12-2007
Posted on Tuesday, March 07, 2017 - 07:58 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

It's called a Type A St.Lawrence, using a Ford Model A block. Opposite to the cars, the shaft/trans. drives off the small end of the crank. I haven't seen it in the literature pictures yet.
Blair
Top of pagePrevious messageNext messageBottom of page Link to this message

bcm
Senior Member
Username: bcm

Post Number: 76
Registered: 11-2009
Posted on Wednesday, March 08, 2017 - 09:17 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Here are pages from St Lawrence 1934 catalogue referencing engine in Blair's post.
Barry


Top of pagePrevious messageNext messageBottom of page Link to this message

bgoss
Senior Member
Username: bgoss

Post Number: 250
Registered: 12-2007
Posted on Wednesday, March 08, 2017 - 11:47 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Thanks Barry. That's just what I was looking for.
Blair

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Password:
E-mail:
Options: Automatically activate URLs in message
Action:

Administration Administration Log Out Log Out   Previous Page Previous Page Next Page Next Page

Home | Classifieds | History | Technical | Links | Store | About Us | Email
&copy 2005 OldMarineEngine.com, P.O. Box 188, Forest Dale, VT 05745-0188 • Phone: 802-247-4864 • All rights reserved.
   Marine Engine Seloc Repair Manual Lookup Tool

marine gas engine repair and restoration