Home | Classifieds | History | Technical | Links | Store | About Us | Email
Topics Topics Edit Profile Profile Help/Instructions Help Member List Register  
Search Last 1|3|7 Days Search Search Tree View Tree View  

Arnolt information request

Old Marine Engine » Multi Cylinder Gas Inboards » Arnolt information request « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

ramounteng
New member
Username: ramounteng

Post Number: 1
Registered: 09-2004
Posted on Wednesday, September 01, 2004 - 10:12 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I am trying to revive an Arnolt Sea Mite. It is a NOS still in crate motor that is missing a few items however the most critical is the water pump (w/pulley) and bracket. The motor has the bracket but is broken. If anyone is parting one out I would love to hear from you.

Further I would appeal to you for any available information on this engine (and/or) company. Literature, photos, manuals, specs etc. Who knows, someone may still have the old engineering drawings laying around (worth a try (smile)).

I spent the day in Warsaw In. trying to research some of the history of Arnolt. I found their plant in Warsaw and the one in Pierston. The plant in Pierston is crumbling but the one in Warsaw is newer and vacant but up for sale. I believe that marine engine production took place in the Pierston plant however I need to dig a lot further in order to even confirm that. I don't know why but I have a great interest in the history of Arnolt. There is very little available on the web, most of it is about Stan "Wacky" Arnolt in his later years and his association with the Arnolt Bristol (automobile).

I would also like to put together an Arnolt (marine engine) owners registry. Anyone interested please e-mail me with your serial #, condition, what the motor is installed in (if installed), transmission type, a photo attachment would be great and any other information that you would like to provide. I know that people don't like to forward name, phone and address info so I will register by e-mail address if you don't feel comfortable providing that information. I would ask however that you include your city and state for geographical tracking only.

I found an article on the web about Mr. John Hacker and his "Doodlebug" which he was to have used the Arnolt Sea Mite in. If anyone has any more information about that I would like to follow that track too. It's a really smart looking craft. ref: http: www.dngoodchild.com/5402.htm

my email address is [email protected]

Thanks!!!
Top of pagePrevious messageNext messageBottom of page Link to this message

andrew
Moderator
Username: andrew

Post Number: 876
Registered: 11-2001


Posted on Thursday, September 02, 2004 - 09:20 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I'm not sure what year this ad or brochure is...

arnolt
Top of pagePrevious messageNext messageBottom of page Link to this message

larry_from_maryland
Senior Member
Username: larry_from_maryland

Post Number: 164
Registered: 07-2003
Posted on Friday, September 03, 2004 - 07:47 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Hey andrew this was obviously a small company,and the engine looks modern factory made.Is it possible that they used Waukesha ICK moters as the base and they just marineized them.the specks are 61ci and 18hp at 2600rpm.Just add 200 rpm and it would be 2800 and 20hp.If its the same engine parts would be much easyer to find.If ramounteng could post casting numbers or more pictures I might be able to confim the id.
Top of pagePrevious messageNext messageBottom of page Link to this message

andrew
Moderator
Username: andrew

Post Number: 878
Registered: 11-2001


Posted on Friday, September 03, 2004 - 08:27 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Larry,

I would guess you are right... they probably didn't build their own block... although I think they did put out a lot of engines for WWII life boats and small gen sets.

Gil Plumb rebuilt one last winter so we can ask him. He is away for a week but I will check with him when he gets back.

ramounteng has obviously done his homework... he probably knows. Maybe he will tell us here.
Top of pagePrevious messageNext messageBottom of page Link to this message

bruce
Senior Member
Username: bruce

Post Number: 216
Registered: 07-2002
Posted on Friday, September 03, 2004 - 08:40 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Andrew, Owner here localy confirms Waukesha based origin of Arnolt motor.
Top of pagePrevious messageNext messageBottom of page Link to this message

ramounteng
New member
Username: ramounteng

Post Number: 2
Registered: 09-2004
Posted on Saturday, September 04, 2004 - 10:25 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Thanks for the response!!! First of all I need all the help I can get on this. I haven't yet pulled the head however I did get two NOS pistons that were supposedly used in the Sea Mite. They measure 2-1/2" dia x 2.35 long. I also got a NOS Zenith carb #S168B which does match the carb info that I found on a related web site. The block has a casting #121220A and the head has a #121002B with the number 211 below that. I could find no other numbers on the block. I seriousely doubt that the water pump from an industrial motor will work because the pump on the marine engine would need to be the suction type of course. Larry, from what I have been able to find out I tend to lean toward your conclusion that the engine might have been cast by Waukesha. From my observations neither plant in Pierston or Warsaw appeared to have been equipped with casting capabilities. I am not even sure that they might have had a forging oven which leads me to conclude that they probably outsourced their forgings as well. I have attached some photos for your parusal. Hope you can make some positive I.D.
Top of pagePrevious messageNext messageBottom of page Link to this message

ramounteng
New member
Username: ramounteng

Post Number: 3
Registered: 09-2004
Posted on Saturday, September 04, 2004 - 10:50 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I took some photos but cannot get them to upload because of the 50k limit. I will try to compress them later but don't think that will work. I could e-mail them if you like. Let me know.
Top of pagePrevious messageNext messageBottom of page Link to this message

andrew
Moderator
Username: andrew

Post Number: 879
Registered: 11-2001


Posted on Saturday, September 04, 2004 - 11:12 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

You need to "reduce" the photos in any photo editing program. "Compressing" them does not work.
Top of pagePrevious messageNext messageBottom of page Link to this message

larry_from_maryland
Senior Member
Username: larry_from_maryland

Post Number: 165
Registered: 07-2003
Posted on Saturday, September 04, 2004 - 06:05 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Normally waukeshaw added lots of extra pat. and casting numbers.But they may have left them off because it would be sold as an arnolt.Haveing an A or B at the end was common on the ones i have worked on.I am more familar with the larger engines.I do have the piston spec's.Diameter 2 1/2 piston pin diameter.625 compression rings .156 thick.
Top of pagePrevious messageNext messageBottom of page Link to this message

ramounteng
Member
Username: ramounteng

Post Number: 4
Registered: 09-2004
Posted on Sunday, September 05, 2004 - 11:16 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Yea! I tried to reduce them but still cannot get below 50k. I dug out an old low res camera and re-shot the photos. They aren't very clear but you should be able to identify something.
Arnolt Sea Mite photos
Top of pagePrevious messageNext messageBottom of page Link to this message

ramounteng
Member
Username: ramounteng

Post Number: 5
Registered: 09-2004
Posted on Sunday, September 05, 2004 - 11:17 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

More Arnolt photosArnolt Sea Mite photos
Top of pagePrevious messageNext messageBottom of page Link to this message

ramounteng
Member
Username: ramounteng

Post Number: 6
Registered: 09-2004
Posted on Sunday, September 05, 2004 - 11:19 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

more Arnolt photosArnolt Sea Mite photos
Top of pagePrevious messageNext messageBottom of page Link to this message

ramounteng
Member
Username: ramounteng

Post Number: 7
Registered: 09-2004
Posted on Sunday, September 05, 2004 - 11:20 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

last Arnolt photoArnolt Sea Mite photos
Top of pagePrevious messageNext messageBottom of page Link to this message

ramounteng
Member
Username: ramounteng

Post Number: 8
Registered: 09-2004
Posted on Sunday, September 05, 2004 - 11:33 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Larry_from_Maryland, The wrist pin is .625 and the oil ring groove is .159 however the compression ring grooves measure .127. Also the pistons are full skirted. What type of head gasket did the Waukesha engine use? I ask because if I cannot find one I will need to hammer one out myself if it used standard fiber material. Don't know what to do if it is composite. The rest of the gaskets I'm not worried about. The seals should be available from Bearing Service
Top of pagePrevious messageNext messageBottom of page Link to this message

larry_from_maryland
Senior Member
Username: larry_from_maryland

Post Number: 166
Registered: 07-2003
Posted on Sunday, September 05, 2004 - 06:16 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I may have gone up a line when reading the ring spec. from the table.All the ones that i worked on had the normal head gasket with 2 metal pieces and some stuff in between.Waukeshaw is now part of Dresser industries.I believe a fellow told me he got a gasket for a smaller wauk. from Arrow gaskets.I have been unable to find a good picture of an ICK.
Top of pagePrevious messageNext messageBottom of page Link to this message

jb_castagnos
Senior Member
Username: jb_castagnos

Post Number: 214
Registered: 07-2002
Posted on Sunday, September 05, 2004 - 06:57 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have a small Waukeshaw starter engine, four cylinder, no water pump, looks like these engines. Is it similar?
Top of pagePrevious messageNext messageBottom of page Link to this message

ramounteng
Member
Username: ramounteng

Post Number: 9
Registered: 09-2004
Posted on Tuesday, September 07, 2004 - 10:00 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Larry & Andrew, I found another casting number. This one is on the cylinder block. The cylinder block is separate from the crankcase. The other number I gave you is on the crankcase. This number is on the flywheel end as follows; 112101, below that is a number 30420, below that looks like ALLOY 21 and to the right is 2- in a box and below that is a large letter L. I hope that between these numbers and the (poor) photos you can positively link this engine to Waukesha. Thanks for your help.
Top of pagePrevious messageNext messageBottom of page Link to this message

ramounteng
Member
Username: ramounteng

Post Number: 10
Registered: 09-2004
Posted on Tuesday, September 07, 2004 - 10:02 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Andrew, do you have a high res. copy of the ad that you posted available? I'd really like to have a readable copy.
Top of pagePrevious messageNext messageBottom of page Link to this message

andrew
Moderator
Username: andrew

Post Number: 888
Registered: 11-2001


Posted on Wednesday, September 08, 2004 - 09:11 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Robert,

I do have a larger version of it, I will email it to you. Also, Arnolt did quite a lot of advertising. Shouldn't be too hard to locate various ads in the period magazines.
Top of pagePrevious messageNext messageBottom of page Link to this message

son1
New member
Username: son1

Post Number: 1
Registered: 09-2005
Posted on Friday, September 30, 2005 - 01:13 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

For Sale. Arnolt Sea Mite Marine Engine. The anchor, propeller and shaft are included. type DDT, Serial #1530, MP 20, RPM 2800. This engine is in good running condition and has been stored in a clean garage. Located in Union City Indiana. please e-mail me at [email protected]
Top of pagePrevious messageNext messageBottom of page Link to this message

pabigD
Visitor
Posted on Friday, October 17, 2008 - 10:59 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Hi marine guys; I have a Arnolt Sea Mite forwhich I need an elec. starter or a Mfg. name and/or a model or part number. Would appreciate any help you can be. pabigD}}}
Top of pagePrevious messageNext messageBottom of page Link to this message

Uldis Stulpins
Visitor
Posted on Sunday, July 10, 2011 - 01:05 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

The other side of this building faces Highway US 30 and had affixed to it's outside wall a large sign in the form of individual letters which spelled out "S.H.Arnolt Corp(oration)?" At night the letters lit up, in red I think, and I can still remember this image vividly from much earlier years as I'd drive to or from Warsaw (I worked at Hoosier International Motors) to North Manchester, Ind., my home. I believe that during the 50's/60's aircraft ejection seats may also have been made there.S.H.Arnolt plant at Pierceton, Ind. 2008

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Password:
E-mail:
Options: Automatically activate URLs in message
Action:

Administration Administration Log Out Log Out   Previous Page Previous Page Next Page Next Page

Home | Classifieds | History | Technical | Links | Store | About Us | Email
&copy 2005 OldMarineEngine.com, P.O. Box 188, Forest Dale, VT 05745-0188 • Phone: 802-247-4864 • All rights reserved.
   Marine Engine Seloc Repair Manual Lookup Tool

marine gas engine repair and restoration