Home | Classifieds | History | Technical | Links | Store | About Us | Email
Topics Topics Edit Profile Profile Help/Instructions Help Member List Register  
Search Last 1|3|7 Days Search Search Tree View Tree View  

30 to 50 hp Slowww diesels

Old Marine Engine » Diesel Inboards » 30 to 50 hp Slowww diesels « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

amos
New member
Username: amos

Post Number: 1
Registered: 01-2006
Posted on Monday, January 16, 2006 - 02:41 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Hello all, I am looking for a very low rpm diesel engine in the 30 to 50 hp range to put in a displacement boat I am building. I really like the low speed engines and I need something interesting to tinker with anyway. My current favorite is a Kelvin K2 but I want to make sure I am not overlooking any other suitable engine. Also, the more options I have, the more likely I can find a good engine. Thanks, Amos
Top of pagePrevious messageNext messageBottom of page Link to this message

Bruce Lendrum
Visitor
Posted on Tuesday, January 17, 2006 - 02:16 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

try New Zelland esp the Waikato River where a lot of the old 2 cylinder K2 were used... I have been looking for some 4 years ( 2002 I posted here looking for one of these 44 hp "Beast" for a Tug Project... The Project is growing too much for the 44 hp but I did talk to several builders there... Good Luck I have not found one in Four years looking.. see my listing at the bottom on the page.. Write to Raymond... he is great!!
Also check with me later I will check my file for names and addresses...
[email protected] is my new address
Top of pagePrevious messageNext messageBottom of page Link to this message

Bruce Lendrum
Visitor
Posted on Tuesday, January 17, 2006 - 05:02 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

http://www.prestonservices.co.uk/i-c.htm
Try this address for older Kelvin K2 or K3..
you know this is going to cost a king ransom
also they still make a 20 bhp single cylinder Lester wt is about 500K ,, turns about 1000 rph to get that power.. could turn it slower..
Top of pagePrevious messageNext messageBottom of page Link to this message

amos
New member
Username: amos

Post Number: 2
Registered: 01-2006
Posted on Tuesday, January 17, 2006 - 01:23 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have also been considering some of the Indian Lister clones that are available up to 28 hp now but they don't have some of the old marine engine characteristics such as a single flywheel and broad rpm range. Thanks Bruce for the link and some ideas about where to look. Amos
Top of pagePrevious messageNext messageBottom of page Link to this message

boyd_guard
Member
Username: boyd_guard

Post Number: 5
Registered: 06-2005
Posted on Tuesday, January 17, 2006 - 08:49 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Family had fishing boat with Lister twin cyld. CE model with one flywheel removed and other flywheel had about a inch thick rim shrunk on making wheel a bigger dia. Run for 30 odd years 50-60hrs a week, no problems at all.
Top of pagePrevious messageNext messageBottom of page Link to this message

rayman
Member
Username: rayman

Post Number: 7
Registered: 10-2005
Posted on Thursday, January 19, 2006 - 10:30 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Bruce and others, there have not been any Kelvins on the waikato since the 1960's all went for scrap. think long and hard about the NEW Russell-Newbury's. thats the way to go and still have the old style power, looks and sound.Kelvins were a dog with petrol start.Try Robbie Robson Machinery in Whangarei for old Gardners out of excavator/draglines.and dont go below 3 cylinders.
Top of pagePrevious messageNext messageBottom of page Link to this message

Bruce Lendrum
Visitor
Posted on Friday, January 27, 2006 - 06:15 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I HAVE HAD A LONG TALK WITH A.K. AT RUSSELL-NEWBURY IN IN ENGLAND.. THEY HAVE A FEW OF THE OLD DM-4'S THEY RETURNED FROM CANADA LAST YEAR.
THE DM2 IS ABOUT 18 HP AND PUSHES A 24 *23 PROP AT 500 RPM. AS WE HAVE TWO SETS OF PLANS IT WILL BE INTERESTING TO SEE IF THE POWER PLANT WILL OR CAN BE USED IN KIT II. AS WITH MANY PROJECTS THE SHIP WILL BE BUILD AROUND THE IDEA OF A CLASIC.. BUT IT WOULD BE FUN TO PUT IT IN A DONZI UNTIL THE KIT II ( OLD SEA GOING TUG FROM NORWAY). THE MORE WE HEAR ABOUT THE KIT THE MORE WE FIND OUT HOW LARGE SHE WAS.. BETTING ON A K4 NOW..THE DM4 MAYBE THE ANSWER WE NEED AS KIT II IS GOING AN EXTRA 4 FEET TO 40 FEET.. MASTER AND FIRST MATE STATEROOM WITH TWO HEADS.. VERY HEAVY STEEL VS
Top of pagePrevious messageNext messageBottom of page Link to this message

Bruce Lendrum
Visitor
Posted on Friday, January 27, 2006 - 06:53 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I HAVE HAD A LONG TALK WITH A.K. AT RUSSELL-NEWBURY IN IN ENGLAND.. THEY HAVE A FEW OF THE OLD DM-4'S THEY RETURNED FROM CANADA LAST YEAR.
THE DM2 IS ABOUT 18 HP AND PUSHES A 24 *23 PROP AT 500 RPM. AS WE HAVE TWO SETS OF PLANS IT WILL BE INTERESTING TO SEE IF THE POWER PLANT WILL OR CAN BE USED IN KIT II. AS WITH MANY PROJECTS THE SHIP WILL BE BUILD AROUND THE IDEA OF A CLASIC.. BUT IT WOULD BE FUN TO PUT IT IN A DONZI UNTIL THE KIT II ( OLD SEA GOING TUG FROM NORWAY). THE MORE WE HEAR ABOUT THE KIT THE MORE WE FIND OUT HOW LARGE SHE WAS.. BETTING ON A K4 NOW..THE DM4 MAYBE THE ANSWER WE NEED AS KIT II IS GOING AN EXTRA 4 FEET TO 40 FEET.. MASTER AND FIRST MATE STATEROOM WITH TWO HEADS.. VERY HEAVY STEEL VS
Top of pagePrevious messageNext messageBottom of page Link to this message

dkwflight
New member
Username: dkwflight

Post Number: 1
Registered: 02-2006
Posted on Sunday, February 26, 2006 - 05:52 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Hi your project is in line with my dream too!
Look up Hundeted engines, dutch
Callesen semidiesels, european.
Both are slow semi diesels usualy equpied with a variable, reverseble pitch props.
I've seen Callesen engines listed on a european ship breaker site, and may still be made.
These are just what you want for a trawler, they run around 500rpm, no trans, just the gear to adlust, reverse the prop.
Reliable as the sun.
The Callesen has one in the power range you want.
Dennis
Top of pagePrevious messageNext messageBottom of page Link to this message

tusharpiston
Visitor
Posted on Wednesday, June 21, 2006 - 06:35 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

TUSHAR AGRO INDUSTRIES
C-1-B-301, AJI G.I.D.C. PHASE II, RAJKOT-360 003 ( INDIA )
TEL NO. +91 281 2389243 / +91 281 2387888
TEL FAX. +91 281 2389243
WEB SITE : www.tusharpistons.com
E-MAIL : [email protected]

Dear Sirs,
We came to know your esteemed company through internet & pleased to introduce ourselves as one of the leading manufacturer & Exporters of LM-13 Aluminium Pistons in Rajkot ( INDIA ).

If you have any inquiry, please feel free to contact us at :
[email protected] & [email protected] or Fax us. If you have Model or Samples, please forward us so that we will quote you our best & competitive prices to you.

We hope to receive your positive reply soon & sincerely wish to have a good business relationship with your esteemed company in near future.


With Best Regards

TUSHAR PATEL
Executive Director ( International Marketing )
Top of pagePrevious messageNext messageBottom of page Link to this message

tusharpiston
Visitor
Posted on Wednesday, June 21, 2006 - 06:37 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

TUSHAR AGRO INDUSTRIES
C-1-B-301, AJI G.I.D.C. PHASE II, RAJKOT-360 003 ( INDIA )
TEL NO. +91 281 2389243 / +91 281 2387888
TEL FAX. +91 281 2389243
WEB SITE : www.tusharpistons.com
E-MAIL : [email protected]

Dear Sirs,
We are manufacturer & Exporters of LM-13 Aluminium Pistons in Rajkot ( INDIA ).

If you have any inquiry, please feel free to contact us at :
[email protected] & [email protected] or Fax us. If you have Model or Samples, please forward us so that we will quote you our best & competitive prices to you.

We hope to receive your positive reply soon & sincerely wish to have a good business relationship with your esteemed company in near future.


With Best Regards

NAYAN PATEL
Executive Director ( International Marketing )
Top of pagePrevious messageNext messageBottom of page Link to this message

tom_montagu
Member
Username: tom_montagu

Post Number: 6
Registered: 12-2011
Posted on Friday, December 30, 2011 - 07:40 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

i know this is answering an old enquiry, but properly set up, the 'K' series KELVIN marine engines are a piece of cake to start--hand or electric (although I would suggest electric start as one gets older!)--all 'K' series were originally petrol start,but quite a few in UK canal boats have been adapted to 'hot-diesel' start, thus eliminating the need for petrol in the engine room-but it then HAS to be electric start. A K4 (88hp) has enough grunt for most applications--try Kevin Whittle on www.theoilengine.co.uk---he has a couple of K4s for sale

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Password:
E-mail:
Options: Automatically activate URLs in message
Action:

Administration Administration Log Out Log Out   Previous Page Previous Page Next Page Next Page

Home | Classifieds | History | Technical | Links | Store | About Us | Email
&copy 2005 OldMarineEngine.com, P.O. Box 188, Forest Dale, VT 05745-0188 • Phone: 802-247-4864 • All rights reserved.
   Marine Engine Seloc Repair Manual Lookup Tool

marine gas engine repair and restoration