Home | Classifieds | History | Technical | Links | Store | About Us | Email
Topics Topics Edit Profile Profile Help/Instructions Help Member List Register  
Search Last 1|3|7 Days Search Search Tree View Tree View  

Newage diesel engine

Old Marine Engine » Diesel Inboards » Newage diesel engine « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

kevin_sparks
New member
Username: kevin_sparks

Post Number: 1
Registered: 01-2005
Posted on Saturday, January 29, 2005 - 09:21 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have a 1973 Sampson 50' ketch, ferro cement. It has a "Newage" 4 cylinder diesel. Does anyone know what could possibly replace this motor with or where i could get parts to rebuild? Thanks for any help
Top of pagePrevious messageNext messageBottom of page Link to this message

Dutton Dock
Visitor
Posted on Monday, January 31, 2005 - 02:27 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I'm guessing it will be a BMC (British Leyland) diesel, 2.2 or 1.5 litre. If so, parts should be available from the UK, not sure about elswhere.

Pics would help identify better
Top of pagePrevious messageNext messageBottom of page Link to this message

sailingeddy
New member
Username: sailingeddy

Post Number: 1
Registered: 03-2005
Posted on Tuesday, March 15, 2005 - 05:33 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have a newage bmc commodore 3.8 inboard diesel, with sims injectionpump, i have section a from the manuel, but I need also the other sections to time my injection pump, or is there someone who knows how to do it, I'll be forever greatfull. eddy
Top of pagePrevious messageNext messageBottom of page Link to this message

larry_from_maryland
Senior Member
Username: larry_from_maryland

Post Number: 213
Registered: 07-2003
Posted on Wednesday, March 16, 2005 - 08:22 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

If it is a british leyland then there should be a tractor manuel that would cover that engine.A number of differant companys sold their tractors in the US.I have worked on some of them,but never timed an injector pump on one.I'll ask around see if anyone knows.
Top of pagePrevious messageNext messageBottom of page Link to this message

lancingmike
Member
Username: lancingmike

Post Number: 4
Registered: 10-2005
Posted on Thursday, October 06, 2005 - 07:34 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Hi,

Send me a photo or two and I expect I will I.D. it and find books.
Top of pagePrevious messageNext messageBottom of page Link to this message

cepinius
Visitor
Posted on Thursday, February 02, 2006 - 05:18 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have diesel moteur"Newage/B.M.C CAPTAIN a" of 4 cylindres.Qui could it say to me or I could find in Belgium a place or I would find parts for this engine? Thank you for your assistance
Top of pagePrevious messageNext messageBottom of page Link to this message

lancingmike
Member
Username: lancingmike

Post Number: 5
Registered: 10-2005
Posted on Thursday, February 02, 2006 - 05:39 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Captain is a BMC 1.5 diesel.
Most engine internal parts are still available.
Original BMC-style marinising has mostly gone, but equally-good aftermarket parts are no problem from my company, Lancing Marine.
Top of pagePrevious messageNext messageBottom of page Link to this message

poker casino673
Visitor
Posted on Monday, March 06, 2006 - 07:37 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

poker casino poker 690
Top of pagePrevious messageNext messageBottom of page Link to this message

jacob
New member
Username: jacob

Post Number: 1
Registered: 08-2007
Posted on Sunday, August 26, 2007 - 02:12 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

hello,
i have Newage Commodor 64 3.8 engine in my boat and i would like to replace original oil filter assembly (paper elemnt style) with the new spin-on type oil filter. Are there any conversion kits available that will bolt to the block directly for spin-on filters or external oil filter? thx
Top of pagePrevious messageNext messageBottom of page Link to this message

John I
Visitor
Posted on Thursday, October 18, 2007 - 08:40 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Recently came across a 2-cylinder marine diesel with 577cc on the block. She's direct cooled, has no lift pump and no manufacturer details.
Other marks include 62k - A2 and N5A Z20. I believe it to be a JGM engine but internet searches for info have proven fruitless. I intend using her for the RYA Diesel Engine course but urgently need to know more. Whre can I get a Manual etc..
Ever Grateful John
Top of pagePrevious messageNext messageBottom of page Link to this message

oslin04
Member
Username: oslin04

Post Number: 11
Registered: 10-2006
Posted on Thursday, October 18, 2007 - 02:00 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Hi John,
Having been the assistant Forman at JGM up until two years before it closed, I can tell you the only two cyl diesel engine sold by them was the Volvo MD2, the bread and butter engines were 4 cyl BMC and the big 6cyl and 8cyl were GM's, if by any chance it was sold by them there will be a plate on it somewhere, but I very much doubt it is one of there's.
Regards Keith.
Top of pagePrevious messageNext messageBottom of page Link to this message

Eric Studer
Visitor
Posted on Wednesday, October 22, 2008 - 06:13 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Dear Sirs,

Please could you give advice or a hint, how I must proceed for taken out of the air from my fuel system.
It is a Thornycroft 154 2,5 liter diesel 4 cyl.(or more specific JGM 2500D Marine Engine 25V-663B-D1065)
I understand that I have to open the two vent-bolts on the fuel injectionpump, one (in front) is working well, given good (air free) fuel, but the other vent-bolt at the back of the injectionpump is (almost) doing nothing, no air and no fuel ???
The 4 injection lines are open and indeed given no fuel (if I start the engine by startermotor),... so no engine running never.
The basic fuel pump is doing well and perform a steady gasoil pressure.

Please what can I do, can you help me.
The boot is in located in the Netherlands in Amsterdam
By the way, the engine has not been used for say 4 to 5 years,....
But new filter etc.all done.

Kind regards, Eric Studer
Top of pagePrevious messageNext messageBottom of page Link to this message

Nick C
Visitor
Posted on Friday, November 14, 2008 - 10:01 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Hello, Looking for parts to fit a Westerbeke 30. I'm fairly sure that it is a British Leyland 1,500 cc inline 4 cyl.I was told that the date of mfg. was Sept, 1980. Looking for gaskets, rings, valves and springs. To start with. Thanks
Top of pagePrevious messageNext messageBottom of page Link to this message

Paul W
Visitor
Posted on Tuesday, September 29, 2009 - 04:14 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

We have BMC 1.5 Diesel that has starting leaking diesel from the fuel injection pump at the engine stop lever. Engine still runs, but very rough at low revs. Is this easy to fix or do we need to replace the pump.
Top of pagePrevious messageNext messageBottom of page Link to this message

montrose
Member
Username: montrose

Post Number: 4
Registered: 03-2010
Posted on Wednesday, March 17, 2010 - 12:36 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

hi there ca anyone tell me after i have removed all pipe work to my 2.2 bmc marine engine injector pump,,,,shall i just pull it out or do i need to alighn anything before i remove it?? and also how do they go back in?? and also does anyone have a manual on this type of engine?? thanks.for any information,
Top of pagePrevious messageNext messageBottom of page Link to this message

oslin04
Advanced Member
Username: oslin04

Post Number: 36
Registered: 10-2006
Posted on Wednesday, March 17, 2010 - 01:19 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Hi Montrose, The pump will be on a master spline and can not be fitted incorrectly but it can be adjusted so mark the body and the block with a centre pop to aline it to where it was when refitting, I can not remember weather this engine is fitted with a DPA pump or a simms rack pump either way there will be marks to set the spill timing, the DPA rotery pump the marks are on the side next to where the pump bolts are, and on the simms type the marks are under a small plate on the side on a rotating coller.
Hope this helps
Keith
Top of pagePrevious messageNext messageBottom of page Link to this message

montrose
Member
Username: montrose

Post Number: 5
Registered: 03-2010
Posted on Wednesday, March 17, 2010 - 04:16 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

to keith oslin04 i am a novice to boat engines and to be honest i really didnt understand what you said but please, please!whats a spill timer and also what is a dpa rotary pump and whats a simms type and lastly whats the small plate where the rotary collar is?? sorry for this but i really dont understand injector pumps.i am hoping you receive this picture of my pump.....geoff.2.2 bmc
Top of pagePrevious messageNext messageBottom of page Link to this message

oslin04
Advanced Member
Username: oslin04

Post Number: 37
Registered: 10-2006
Posted on Thursday, March 18, 2010 - 06:23 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Ok Geoff,
The picture you have sent is of a DPA rotory pump and I think I can just see the timing marks on the edge or the flange by the bolt hole in the photo there will be the same marks on the mating face on the block, the spill timing is the point at which fuel is injected like the spark on a car ignition, the pump as I have said has a master spline and can not be put in wrong, but small adjustments can be made by rotating the pump on its mounts using the marks on the body to get the spill timing spot on, forget my comments on the small plate etc, that only applies to the other type of pump where all the injection pipes are on the top and not round the body.
Keith
Top of pagePrevious messageNext messageBottom of page Link to this message

larry_from_maryland
Senior Member
Username: larry_from_maryland

Post Number: 389
Registered: 07-2003


Posted on Thursday, March 18, 2010 - 12:12 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

The timeing window is the plate with the 2 small bolts faceing the camera. You line up the 2 marks inside and put the engine on tdc and the number 1 cylinder on the compression stroke to time the engine. Most people like to line up the marks before removal.
Top of pagePrevious messageNext messageBottom of page Link to this message

upthecreakwithoutapaddle
New member
Username: upthecreakwithoutapaddle

Post Number: 2
Registered: 10-2016
Posted on Wednesday, October 05, 2016 - 08:01 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Hi All
I would like to rejuvenate my old BMC 1500 in a narrow boat my father just acquired but there seems to little in the way of literature about. Has anyone any ideas to the make a model and whether there is a manual for this type of engine.

There are quite a few ugly pipes and it could do with and a few bits replacing to bring it back to its original best.
Does anyone have any tips on what manufacturer of paint to use. I know there has been a thread on here regarding the colour and so forth so I am hoping to have the engine out just the once and the paint job to last so would to prefer to do it properly. Has there been anyone who has successfully painted their engine and if so what was the minimum coats they applied?

Any advice would be extremely welcome.

Many thanks in advance.

Hopefully the picture uploads.
BMC 1500
Top of pagePrevious messageNext messageBottom of page Link to this message

lancingmike
Member
Username: lancingmike

Post Number: 6
Registered: 10-2005
Posted on Wednesday, October 05, 2016 - 03:14 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Give me a call on 01273 411765 and I'll tell you all about your engine. Afternoons best.
Mike
Top of pagePrevious messageNext messageBottom of page Link to this message

upthecreakwithoutapaddle
New member
Username: upthecreakwithoutapaddle

Post Number: 3
Registered: 10-2016
Posted on Thursday, October 06, 2016 - 04:17 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I will give you a ring Mike as I would like to reduce the jubilee clips to a minimum and try to bring the majesty back to the old girl.
Shane

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Password:
E-mail:
Options: Automatically activate URLs in message
Action:

Administration Administration Log Out Log Out   Previous Page Previous Page Next Page Next Page

Home | Classifieds | History | Technical | Links | Store | About Us | Email
&copy 2005 OldMarineEngine.com, P.O. Box 188, Forest Dale, VT 05745-0188 • Phone: 802-247-4864 • All rights reserved.
   Marine Engine Seloc Repair Manual Lookup Tool

marine gas engine repair and restoration