Home | Classifieds | History | Technical | Links | Store | About Us | Email
Topics Topics Edit Profile Profile Help/Instructions Help Member List Register  
Search Last 1|3|7 Days Search Search Tree View Tree View  

1964 Yanmar NTS 85 1cyl 8.5 hp diesel...

Old Marine Engine » Diesel Inboards » 1964 Yanmar NTS 85 1cyl 8.5 hp diesel inboard « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Brandon Fields
Visitor
Posted on Saturday, April 19, 2008 - 01:38 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I just got a hold of an old sailboat that I'm restoring. It has a 1964 Yanmar NTS 85 and
I finally got it started today. I've got the original instruction book luckily, although no good for complete rebuilding. It does have a belt driven starter, so no hand crank for me thank you very much. The only website I've seen that carries a few engine parts is >>http://www.woodenboatshop.com.au/site/misc/wbs/downloads/yanmar/quickref/QR%2020 07.pdf

I'm hoping to find a mechanics manual for this and more parts, I'm thinking I'll have to learn Japanese to trace this one down.

Feel free to ask any questions, I'll even scan the instruction book if you like, and post pictures showing how the electric starter is set up with wiring diagram. Maybe you could help me out with the repair manual or cross compatible engine/transmission parts?
Top of pagePrevious messageNext messageBottom of page Link to this message

bristol20
Member
Username: bristol20

Post Number: 5
Registered: 08-2006
Posted on Sunday, April 20, 2008 - 06:27 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Brandon what parts are you after? not sure where you are, im in Australia i have a few of these engines,and a couple of basket cases. The NTS85 was 4hp at 1500 rpm, the out put shaft came of the camshaft and turned at 750 rpm. Yanmar also made a smaller version NTS70R 3hp at 1800 output shaft at 900 rpm. I used a 20w\40 oil for years ,had no problems.
Steve.
Top of pagePrevious messageNext messageBottom of page Link to this message

Brandon Fields
Visitor
Posted on Monday, April 21, 2008 - 12:45 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Steve, Thanks, sounds great. I'm in Seattle, Washington in the states.. So it's 4hp not 8.5, I stand corrected. The clutch housing is installed with the fill nut upside down, not sure what that is about. With the clutch lever in neutral, the shaft spins as if in 'ahead', and if put in 'ahead' it stalls the engine. And so I figure that I need clutch plates? Not sure, as I said, a repair manual would help. It would also be nice to have access to parts if anything else goes out. I haven't done a thorough inspection, I'm sure more is needed. But what a beast of an engine, I'm sure I'll get 20 more years with good treatment.
Top of pagePrevious messageNext messageBottom of page Link to this message

bristol20
Member
Username: bristol20

Post Number: 6
Registered: 08-2006
Posted on Monday, April 21, 2008 - 06:57 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Brandon, the clutch housing has no clutch plates and simply contains two beveled gears and two smaller sun gears. when in ahead, the whole clutch barrel will spin, when going astern the clutch barrel will be locked up by the brake band and the sun gears will be spining inside the clutch barrel, the engine will work harder when going astearn. if the engine stalls in ahead position the gears might be locked up in the housing.to dismantle the clutch housing isn't a big job, not shure what you mean by fill nut.
the instruction book i have gives a basic strip down procedure, is yours the same? I hope some of this makes sense. parts are getting hard to get, but the transmition just has bronze bushes, so can be made up easily.
hope this helps. Steve
Top of pagePrevious messageNext messageBottom of page Link to this message

Brandon Fields
Visitor
Posted on Monday, April 21, 2008 - 01:24 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

That helps a lot actually. By 'fill nut' I meant the nut on the clutch housing for putting oil in. Since the whole housing turns when in 'ahead', it would make since as to why this is inaccessible. It must be stuck in 'astern'. I'll just need to dismantle it or at least turn it enough to access the oil fill, it's probably bone dry. Nice to hear that it doesn't have all kinds of parts, that's actually why I like the engine, it's just basic components which is why it's lasted so long. My instruction book has clutch adjustment instructions, but no dismantling instructions, please forward if you have any info. Thanks again Steve, I suppose if I'm in need of some parts, I can purchase them from you? -Brandon
Top of pagePrevious messageNext messageBottom of page Link to this message

bristol20
Member
Username: bristol20

Post Number: 7
Registered: 08-2006
Posted on Tuesday, April 22, 2008 - 07:54 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Brandon will get a copy of the book i have off to you when i can,might be a few days though. I think you will find, with carefull dismantling and a good clean, you won`t have to replace much. the bronze bush that runs on the water pump eccentric is usely worn through lack of oil, also you might have to replace both oil-seals on the clutch housing. I use 90 grade oil in the clutch housing , but have also seen a half oil and grease mix,or even stright grease used. those gears are only used when going astern. regards Steve.
Top of pagePrevious messageNext messageBottom of page Link to this message

Brandon Fields
Visitor
Posted on Friday, May 02, 2008 - 01:18 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Looking forward to it, Steve.

Thanks again,

Brandon
Top of pagePrevious messageNext messageBottom of page Link to this message

paulvec
Member
Username: paulvec

Post Number: 7
Registered: 02-2007
Posted on Tuesday, August 11, 2009 - 07:00 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Hi Steve & Brandon!
the HP ratings for these engines were reduced for Australia and NZ to get around import tariffs! So can't trust what was written on the manuals! I have a manual for the NTS70 series!
cheers paul
Top of pagePrevious messageNext messageBottom of page Link to this message

Murray M
Visitor
Posted on Monday, August 17, 2009 - 06:43 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Afriend had one of these that he had in a small 22ft yacht, from memory the fuel pump was a little crude by todays standards being a ram type pump that you packed with shims to calibrate. I also remember the little rotof on the front of the engine to show the lube oil was circulating. When we wanted a laugh we used to read the engine manual. Japanese interpretation of English in the 1960s was quite funny to read.
Top of pagePrevious messageNext messageBottom of page Link to this message

the_owl
Member
Username: the_owl

Post Number: 4
Registered: 07-2009
Posted on Sunday, August 23, 2009 - 08:05 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Just yesterday I got an NTS 85 with clutch assembly, is it a forward/ neutral or does it have reverse as well. The motor has been in a shed for 25 years with the decompression lever on, though I,ve put this in the run position there is no compression when I rotate the flywheel. Any manuals,drawings or workshop manual etc. would be a treasure if available. The motor is a 1965 model
Top of pagePrevious messageNext messageBottom of page Link to this message

the_owl
Member
Username: the_owl

Post Number: 5
Registered: 07-2009
Posted on Sunday, August 23, 2009 - 08:24 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I also need a starting handle for the Yanmar NTS 85 if anyone has got one for sale.
Top of pagePrevious messageNext messageBottom of page Link to this message

paulvec
Member
Username: paulvec

Post Number: 8
Registered: 02-2007
Posted on Monday, August 24, 2009 - 07:50 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Hi Mike! yes forward,neutral & reverse! I can't imagine a marine engine of any sort without reverse :-) I have a scanned NTS85 instruction book I can send you if you email me direct
cheers paul
Top of pagePrevious messageNext messageBottom of page Link to this message

the_owl
Member
Username: the_owl

Post Number: 6
Registered: 07-2009
Posted on Thursday, September 03, 2009 - 02:27 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Thanks Paul, let me have your Email details, I,m at [email protected] Thanks and best regards Mike
Top of pagePrevious messageNext messageBottom of page Link to this message

Kapila suraj Rajasuriya
Visitor
Posted on Thursday, May 06, 2010 - 03:38 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Dear Sir,
I'm keenly searching a copy of service or user manual of Yanmar NT-65K diesel engine.could you please help me to find a copy
Top of pagePrevious messageNext messageBottom of page Link to this message

potsy1
New member
Username: potsy1

Post Number: 1
Registered: 05-2010
Posted on Tuesday, May 25, 2010 - 03:50 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Gents i to am rebiuding an NTS85 and would be interested in recieving any copies of manuals which may assist my rebuild,I have about 2mm play in bigend bearing which i have just recently developed, would appreciate your help
Top of pagePrevious messageNext messageBottom of page Link to this message

the_owl
Member
Username: the_owl

Post Number: 7
Registered: 07-2009
Posted on Tuesday, May 25, 2010 - 06:41 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have an almost unused NTS 85 which is really too heavy for my boat so haven't installed it. I would like to swap for petrol motor. I am in Adelaide South Australia
Top of pagePrevious messageNext messageBottom of page Link to this message

potsy1
New member
Username: potsy1

Post Number: 2
Registered: 05-2010
Posted on Monday, June 07, 2010 - 01:58 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

looking for parts and a manual for NTS85 Yanmar,have pulled the motor down and need crank bearings and oil filter. The front bearing is shot.Was the original colour of the block red with a black tank? Can anybody assist.?
Top of pagePrevious messageNext messageBottom of page Link to this message

johntt
New member
Username: johntt

Post Number: 1
Registered: 01-2011
Posted on Friday, January 28, 2011 - 09:49 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Hello I have an NTS85 Yanmar and I am looking for a fuel pump if anyone can help please email thankyou JohnTT
Top of pagePrevious messageNext messageBottom of page Link to this message

Bo Satje
Visitor
Posted on Saturday, October 25, 2014 - 07:43 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Hi,
I have acquired an NTS70r recently. It runs well but has oil leaks out of almost every seal and flaky paint as well as some corrosion so I have started to dismantle it. I know this is an old thread but I was hoping someone might be able to answer a few questions.
- there is no air cleaner, any suggestions on what I could adapt a filter box from?
- trouble removing the large nut holding on the flywheel, its not reverse thread is it?
- I have not removed the head but do the other bolts eg.crankcase/water jacket cover need to be tightened to a specific torque?
Any help or suggestions would be much appreciated, or info on where to find a manual.
Thanks! Bo
Top of pagePrevious messageNext messageBottom of page Link to this message

ferrynice
Visitor
Posted on Saturday, August 06, 2016 - 08:22 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I own a Yanmar NTS85 and I am looking for a starter relais
The engine is started by beltstarter
Anyone a suggestion to replace the relais
Top of pagePrevious messageNext messageBottom of page Link to this message

bladerunner
New member
Username: bladerunner

Post Number: 1
Registered: 11-2016
Posted on Friday, November 04, 2016 - 05:45 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Hello Ferrynice, I tried to upload the Yanmar NTS -85 Manual but exceeded the limit, please pm me if you would like me to email same?.
I have been working on these engines and many other Diesel engs. for over 50 yrs. perhaps I can help you?.
Regards
John - Mar.eng.
Bladerunner Boats
Top of pagePrevious messageNext messageBottom of page Link to this message

Alex Jerrim
Visitor
Posted on Saturday, January 14, 2017 - 04:20 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Hi everyone.
I have an NTS 85 and it blows oil out the cap above the oil cap/filller plug. What could be the reasons for this?
Cheers
Alex
Top of pagePrevious messageNext messageBottom of page Link to this message

oslin04
Senior Member
Username: oslin04

Post Number: 94
Registered: 10-2006
Posted on Sunday, January 15, 2017 - 04:08 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

It might be a blocked crankcase breather or worn rings

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Password:
E-mail:
Options: Automatically activate URLs in message
Action:

Administration Administration Log Out Log Out   Previous Page Previous Page Next Page Next Page

Home | Classifieds | History | Technical | Links | Store | About Us | Email
&copy 2005 OldMarineEngine.com, P.O. Box 188, Forest Dale, VT 05745-0188 • Phone: 802-247-4864 • All rights reserved.
   Marine Engine Seloc Repair Manual Lookup Tool

marine gas engine repair and restoration