Home | Classifieds | History | Technical | Links | Store | About Us | Email
Topics Topics Edit Profile Profile Help/Instructions Help Member List Register  
Search Last 1|3|7 Days Search Search Tree View Tree View  

Ruggerini

Old Marine Engine » Diesel Inboards » Ruggerini « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Robert Holtzer
Posted on Thursday, January 31, 2002 - 07:30 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Anyone familiar with the Ruggerini Motori RDM 901 single cylinder (500cc) marine diesel?
Top of pagePrevious messageNext messageBottom of page Link to this message

andrew
Posted on Thursday, January 31, 2002 - 07:52 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Robert,
I have some basic specs for the Ruggerini RDM 901 of:

Quote:

90mm x 85mm
541 cm3
8.8kW or 11.8 HP at 2800RPM



It seems that Ruggerini is still in business and might have some info for you.

Or maybe someone else here is familiar with it.

Regards,
Andrew
Top of pagePrevious messageNext messageBottom of page Link to this message

Robert L. Holtzer
Posted on Sunday, February 03, 2002 - 12:12 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Thanks, Andrew. I have the basic information and a parts list courtesy of Deutch (USA) and Ruggerini (Italy) parts department. I am looking for an operation manual and persons with some hands-on experience with these engines. I understand the U.S. Air Force used a non-marine version of the engine some years back. However, this was essentially hearsay.

Your interest is appreciated.

Bob Holtzer
Top of pagePrevious messageNext messageBottom of page Link to this message

Stig Pettersen
Posted on Friday, July 11, 2003 - 07:07 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Have a ruggerini RDM 901
Never started with full manual for motor
with dynastarter.
My engine have separate alternator and starter
For more info
E-mail: [email protected]
Top of pagePrevious messageNext messageBottom of page Link to this message

joerg moebius
Posted on Wednesday, April 14, 2004 - 03:17 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

cylinder head of a Ruggerini RM 278 (2 Cyl.)

Hi,
I am looking for a cylinder head. Does anybody know where to get?

Might be interesting:
Ruggerini is not in business anymore. Lombardini (also an italian motor producer) has bought the rests of Ruggerini. allpa in the netherlands is the Ruggerini chief agency for europe. allpa deals only with commercial partner, but they will give contacts to service partner (I met them on the Hanseboot in Hamburg this yeas).

Regards

Joerg Moebius
Top of pagePrevious messageNext messageBottom of page Link to this message

markmif
Posted on Wednesday, June 02, 2004 - 04:03 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I am looking for the manual of Ruggerini RM90.

Can anyone send me a copy?
Top of pagePrevious messageNext messageBottom of page Link to this message

dennis kohlmeier
Posted on Wednesday, June 02, 2004 - 11:03 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

wanted ruggerini rd 901, also need manual for same. 6-2-04. thanks for any info. dennis
Top of pagePrevious messageNext messageBottom of page Link to this message

Vicen�
Visitor
Posted on Tuesday, July 13, 2004 - 02:47 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I am looking for the manual of ruggerini MM150 can anyone sent mi a copy ?
thanks
Top of pagePrevious messageNext messageBottom of page Link to this message

MStoneRD185
Visitor
Posted on Wednesday, August 04, 2004 - 01:35 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Looking for information, guidence and a manual for an RD 185 Ruggerini or ARONA (??)Marine Inboard. Is there a relationship between Ruggerini and Arona ?
New to me.THX Mike
Top of pagePrevious messageNext messageBottom of page Link to this message

Roberto Ferrario
Visitor
Posted on Tuesday, September 07, 2004 - 04:40 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I�m looking for ruggerini motors parts model RDM 901. Any idea?
Part N�: 468-29 Quantity:1
Part N�: 708-16 Quantity:2
Thanks
Robert
Top of pagePrevious messageNext messageBottom of page Link to this message

Sania
Visitor
Posted on Wednesday, September 22, 2004 - 03:54 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I am looking for the manual of ruggerini RD270 can anyone sent me a copy.
thanks
Top of pagePrevious messageNext messageBottom of page Link to this message

cesar pedrozo
Visitor
Posted on Wednesday, September 29, 2004 - 10:24 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Y am looking for information,guidance and a manual for an RM 80 Ruggerini Diesel Marine Inboard. Many thanks.
Top of pagePrevious messageNext messageBottom of page Link to this message

diud
New member
Username: diud

Post Number: 1
Registered: 10-2004
Posted on Sunday, October 31, 2004 - 09:44 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

can anyone help me by telling me what kind of alternator and starter do i need for Ruggerini RDM 90 0.5 ??
Thank you !

[email protected]
Top of pagePrevious messageNext messageBottom of page Link to this message

beau
New member
Username: beau

Post Number: 1
Registered: 11-2004
Posted on Thursday, November 18, 2004 - 11:43 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Hello,
I'm looking for any information about a ruggerini rm90. Experience will do as well.
Problem i have with this engin is that it will not heat up when running. It just stays below 38�c
Top of pagePrevious messageNext messageBottom of page Link to this message

l_ee_waddell
Member
Username: l_ee_waddell

Post Number: 4
Registered: 08-2004
Posted on Thursday, November 18, 2004 - 10:35 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Well, I'll tell ya wht I know and that's an engine is an engine is an engine is an engine. Enjoy it! Take out any thermostats if any and run as many RPM's as you like, that is, as long as there aren't any temp gauges lyin to ya. Sounds like you might have it made. The time to worry is when the temp is too high. Make sure the guages aren't lyin and then let everybody know.
Top of pagePrevious messageNext messageBottom of page Link to this message

beau
New member
Username: beau

Post Number: 2
Registered: 11-2004
Posted on Friday, November 19, 2004 - 04:06 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Take out any thermostatic valve? That way it will not even heat up to 38�c. Running at full speed with a very cold engine? Doesnt sounds too healthy for the engine to me. I bet it will start using oil in no time if you do that frequently. I checked all the guages and they are working fine.

Anyway i might have found the problem, the bypass over the engine which goes directly to the exhaust manifold was almost completely blocked.
Perhaps because of that the pressure to the thermostatic valve was bigger so more water was forced to pass the thermostatic valve? (engine has direct cooling)
Top of pagePrevious messageNext messageBottom of page Link to this message

l_ee_waddell
Member
Username: l_ee_waddell

Post Number: 5
Registered: 08-2004
Posted on Saturday, November 20, 2004 - 12:22 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Ya what was I thining about? It's already not warming up, sounds dislexic. Don't trust those guages too much though. Curious however, how do you suppose that bypass got blocked? Direct cooling, no strainers? Was the exhaust manifold any warmer because of it?
Top of pagePrevious messageNext messageBottom of page Link to this message

beau
New member
Username: beau

Post Number: 3
Registered: 11-2004
Posted on Saturday, November 20, 2004 - 06:38 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Well, i found out that is was almost completely blocked because i unscrewed some sort of hollow bold (called "eye" in the manual) which devides the cooling currunt in two. One directly to the exhaust manifold, the other to the engine. The outlet of that bold to the bypass was chalked up.
I verified the temperature guage and it is working correctly. (Tested it in a glass of hot water with a thermometer.)Exhaust manifold colder now? Dont know, didnt checked it but i can see that more water is coming out of exhaust pipe. Only one strainer and thats placed before the waterpump.
Top of pagePrevious messageNext messageBottom of page Link to this message

l_ee_waddell
Member
Username: l_ee_waddell

Post Number: 6
Registered: 08-2004
Posted on Sunday, November 21, 2004 - 01:18 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Sounds like yer in perty good shape in spite of things and at least you have a screen. Are there any zincs that screw into the jackets?
Top of pagePrevious messageNext messageBottom of page Link to this message

beau
Member
Username: beau

Post Number: 4
Registered: 11-2004
Posted on Monday, February 14, 2005 - 02:12 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Yes, there a few zincs that screw into the engine block.
Top of pagePrevious messageNext messageBottom of page Link to this message

mammalek
Visitor
Posted on Monday, February 28, 2005 - 08:48 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I LOOK FOR RUGGERINI RD92/2 MOTOR COUPLED TO GENSET WELDING GENERATOR ALL ELECTRICAL DIAGRAMS BEST THANKS
Top of pagePrevious messageNext messageBottom of page Link to this message

nik
New member
Username: nik

Post Number: 1
Registered: 03-2005
Posted on Sunday, March 27, 2005 - 12:35 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have an old 'Ruggerini' diesel boat engine, 2 cylinders, sea-water cooling system. No other engine's particulars are known.
I am interesting for an 'Operator's instructions manual' as well as for any possible information.
The motor is running well but it is in need of general onerhauling and any information shall be appreciated. Thanks
Top of pagePrevious messageNext messageBottom of page Link to this message

beau
Member
Username: beau

Post Number: 5
Registered: 11-2004
Posted on Sunday, March 27, 2005 - 03:44 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Nik, what type of ruggerini?
Top of pagePrevious messageNext messageBottom of page Link to this message

Ian Haykin
Visitor
Posted on Thursday, April 07, 2005 - 11:25 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have a Ruggerini RM270 water cooled Diesel Generator.When it starts I hear a pop,pop, sound and then it runs perfect. After about 15 min the engine starts to overheat. The coolant disapears out of the tank. I presume that the Head Gasget must have blown. Does anyone have any suggestions where I might obtain a new one? The water does not get into the oil system.
Top of pagePrevious messageNext messageBottom of page Link to this message

beau
Member
Username: beau

Post Number: 6
Registered: 11-2004
Posted on Thursday, April 07, 2005 - 03:34 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

And where exactly do you live? UK i presume?

greets
Top of pagePrevious messageNext messageBottom of page Link to this message

Ian Haykin
Visitor
Posted on Friday, April 08, 2005 - 04:20 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I live in Toronto Canada
Top of pagePrevious messageNext messageBottom of page Link to this message

Ron-Davis
Visitor
Posted on Wednesday, June 15, 2005 - 12:46 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I am the UK importer / distributor for Ruggerini Marine. Most spares are still available although there are no new engines. With regards to engine temperature; Any engine that is salt water cooled must NOT run over 50-53 deg.C or the salt will drop out of the water and block waterways. If the engine runs cold, it's safer than if it runs hot. To ensure good ring seal, etc. keep the revs up whenever you can. Regular slow running without heavy load, is not good for any engine. It's the combustion temperatures you are looking to keep up, not water jacket temps. After all, no diesel engine could run if the combustion temps were as low as the water jacket temps, even at 85 - 90 deg. You can always ring me during the working day on 44 (0)1305821175.
Top of pagePrevious messageNext messageBottom of page Link to this message

beau
Member
Username: beau

Post Number: 7
Registered: 11-2004
Posted on Friday, July 08, 2005 - 04:15 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Ron, i agree with you on the salt dropping but it is not normal that the watertemp not even reaches 40�C (lowest readable value on the clock). The engin does not reach a proper combustiontemp. She alway produces a blue smoke.
Blue smokes means; running a cold diesel engine or burning oil as we all know. The fumes produced by the engin do not smell like burned oil at all and the oil level in the engin has not dropped a bit after several hours of running. So, engin running too cold. It might be safer to run at too cold temp instead of too hot but running at too cold temp will shorten the live of the engine by many many hours. If i run the engin at 3/4 for a couple of hours and then release power to stationary running she drops below stationary rpm. just the same as a cold start. After a few minutes with very little power she runs fine again. For those reasons the temp must go up to 50�C. As the thermostatic valve is designed for 50�C and opens/closes at 48�C (fully opend at 52�C)the temp must be around 50�C. I also got in contact with another rm 90 owner and his engine is running around 50�C so there is something wrong with mine.
Top of pagePrevious messageNext messageBottom of page Link to this message

Miss Tekila
Visitor
Posted on Monday, September 12, 2005 - 12:09 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Who can help this lady?
Bought a welding machine at Lincoln they cannot help me if i do not have the parts number of Lincoln Ranger 8+ Diesel battery charger regulator.This partfrom a deutz engine dealer Lincoln used a Italian Engine for this unit called Ruggorini model RD201. HELP i need this part urgently who can help me????

Thank you
Top of pagePrevious messageNext messageBottom of page Link to this message

landlordjord
New member
Username: landlordjord

Post Number: 1
Registered: 11-2005
Posted on Monday, November 21, 2005 - 05:36 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

i am looking for a ruggerini diesel rd270 and rd010 starter motor
Top of pagePrevious messageNext messageBottom of page Link to this message

ABDUL MAJID
Visitor
Posted on Wednesday, November 23, 2005 - 10:52 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I WANT RUGGERINI MOTOR/SPA
TYPE HT-51
NO:-O4O71/819478
CC 0260 VERSION 0407
RPM 3600
PLEASE SEND ME THE PHOTO,COST AND AVAILABILITY
THANK YOU.
Top of pagePrevious messageNext messageBottom of page Link to this message

Bruce Lendrum
Visitor
Posted on Monday, December 26, 2005 - 05:16 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

What is the largest single cylinder Ruggerini diesel made for boats esp small tug boats: could it be sold in the USA as Duetch(sic) Diesel ( Deutch). And could it push a 20 foot x 8.5 beam Tug boat at 20 knots????
Top of pagePrevious messageNext messageBottom of page Link to this message

Petre NITA
Visitor
Posted on Wednesday, December 28, 2005 - 04:36 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I am looking for information,guidance and a manual for an one cylinder RF 140 Ruggerini Diesel engine(602ccm). Many thanks!
Don't wonder too much it arrives also in Romania!
Top of pagePrevious messageNext messageBottom of page Link to this message

beau
Member
Username: beau

Post Number: 8
Registered: 11-2004
Posted on Thursday, December 29, 2005 - 11:33 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Hello all.
At the moment they are rebuilding this site
http://www.ruggerini.it

thx
Top of pagePrevious messageNext messageBottom of page Link to this message

Thorleif Holme
Visitor
Posted on Tuesday, January 24, 2006 - 08:08 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have a Ruggerini RDM 901....I am in need for a operating manual , would very much apreciate if someone could help here.
Top of pagePrevious messageNext messageBottom of page Link to this message

Trajkovski Trajce
Visitor
Posted on Wednesday, February 15, 2006 - 04:23 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I'm looking for some parts of ruggerini serie RD80-81-RD 80/v.Thanks a lot of any information as soon as possible please
Top of pagePrevious messageNext messageBottom of page Link to this message

George Dougherty
Visitor
Posted on Wednesday, March 22, 2006 - 10:36 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Can anybody help. I don't know anything about motors.
I am looking for a Manual for the RUGGERINI GENERATOR TYPE RDM90i.
The Model is probably RDM901
A friend of mine has asked me to find him one. He has written the following-
Type ROM 90i
RPM 2800
Matricola
000964
PMAX ESER CIZ 12
CONTINVAT IVA 11
ENGINE
0160 -000964
He would be happy with an EXPLODED VIEW OF THE ENGINE.
REGARDS, George
Top of pagePrevious messageNext messageBottom of page Link to this message

Gary Mayclair
Visitor
Posted on Tuesday, April 11, 2006 - 01:13 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Hello I have a single cylinder Ruggerini air cooled marine engine with a crashbox ( clutchless )it says 18hp at 3000 revs on the name plate. I think it also says RD 950....does anyone have any info on it..it looks quite old.
Top of pagePrevious messageNext messageBottom of page Link to this message

john haber
Visitor
Posted on Thursday, April 27, 2006 - 06:58 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

looks like i may need a replacement injector pump for rd200 twin air cooled diesel.eng no 112293. any idea where to start looking? please email info [email protected]
if ron davis sees this , i tried to call you on 01305821175.no connection. new number pls ?
Top of pagePrevious messageNext messageBottom of page Link to this message

Josef Koch
Visitor
Posted on Saturday, May 13, 2006 - 11:09 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I am looking for part Nr 063-19, "Complete elastic pad" for a Ruggerini RDM 901, 10 HP. I am in Germany for the summer, need the part in New Zealand next winter. Any help out there?
Top of pagePrevious messageNext messageBottom of page Link to this message

John E. hall
Visitor
Posted on Thursday, June 01, 2006 - 12:37 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

RDM 901 for sale.Ten years ago We inherited an RDM 901, complete engine with accessorys,2:1 gear, mounted on a test bed/shipping base. The motor is zero time. Once a year I start it for fun:it runs fine. Make an offer
Top of pagePrevious messageNext messageBottom of page Link to this message

pdp8user
New member
Username: pdp8user

Post Number: 1
Registered: 05-2006
Posted on Thursday, June 01, 2006 - 07:02 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

What part of the world are you in, John?
Top of pagePrevious messageNext messageBottom of page Link to this message

Snorre
Visitor
Posted on Tuesday, October 10, 2006 - 04:49 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

RDM 901/2 marine diesel motor for sale. The motor has been working 1115 h.
It is a 1982 mod. with a 2:1 gear, working well but cold need a total service.
Operating manual is following.
Price: 500 Euro.
Top of pagePrevious messageNext messageBottom of page Link to this message

sailmaster
New member
Username: sailmaster

Post Number: 1
Registered: 11-2006
Posted on Thursday, November 09, 2006 - 06:57 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have a RDM 901 and need a piston & Rings. can anyone tell me were I can find them
Top of pagePrevious messageNext messageBottom of page Link to this message

hawk
New member
Username: hawk

Post Number: 1
Registered: 08-2007
Posted on Thursday, August 09, 2007 - 09:48 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

hi i have a ruggerini rm200 diesel welder/generator it is air cooled...im lookin to rebuild my engine does anyone know hows the engine splits from the dyno??
Top of pagePrevious messageNext messageBottom of page Link to this message

Charlie Paradise
Visitor
Posted on Thursday, January 24, 2008 - 03:24 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have a Ruggerini 12.5 HP diesel outboard; single cylinder; air cooled engine with numbers on it:
0324 600140
I am doing a complete restoration and need a parts manual and distributor for parts. I am in Baja Mexico but come back and forth from ArizonaRuggerini Outboard Engine
Top of pagePrevious messageNext messageBottom of page Link to this message

malta
Visitor
Posted on Sunday, February 10, 2008 - 02:19 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Various marine watercooled & aircooled Ruggerini parts available - from Malta (europe)
contact [email protected]
Top of pagePrevious messageNext messageBottom of page Link to this message

SalvageMan
Visitor
Posted on Sunday, March 16, 2008 - 09:49 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I found this while digging. The link should still be good, otherwise you can google for the filename:
IPB Ruggerini RM80-81-RDM901-121.pdf
It's a PDF with a full exploded parts diagram for the Ruggerini 901 engine.
http://www.masenorthamerica.com/sitemap1.php
Top of pagePrevious messageNext messageBottom of page Link to this message

alanb
Visitor
Posted on Thursday, April 17, 2008 - 07:51 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

any info manual spares list ect for rm270 or 278
Top of pagePrevious messageNext messageBottom of page Link to this message

yofy
New member
Username: yofy

Post Number: 1
Registered: 07-2008
Posted on Wednesday, July 16, 2008 - 06:32 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

SalvageMan, I just checked out that manual and it was a great help thanks.

I still have a question. I have a Ruggerini RDM 901 diesel engine on my sailboat. I have just had the oil pressure drop suddenly. After some reasearch, I believe that oil regulating valve spring may have broken. While I've taken apart surrounding parts and the oil filter and the filter base, I can't find the placement of the valve itself.

Can anybody tell me where the oil regulating valve is situated on the RDM 901?
Top of pagePrevious messageNext messageBottom of page Link to this message

enterpreneur
New member
Username: enterpreneur

Post Number: 1
Registered: 12-2008
Posted on Monday, December 01, 2008 - 04:15 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have ruggerini rd270..I want to sell some parts of this engine. I m gonna sell all parts of this engine except cylinders.If anyone wants to buy these parts please send me an e-mail..

Regards Seref Cakir
Top of pagePrevious messageNext messageBottom of page Link to this message

J.P.B.
Visitor
Posted on Thursday, December 04, 2008 - 12:30 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I look for a textbook(manual worker) of installation for a generator Ruggerini RDM901.
Would have you a copy of this document to sell me.
Thank you.
J.P. Brunot
Top of pagePrevious messageNext messageBottom of page Link to this message

enterpreneur
New member
Username: enterpreneur

Post Number: 2
Registered: 12-2008
Posted on Friday, December 05, 2008 - 04:30 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

unfortunately, I don't have textbook for RDM901..If i found, I would send to you..
Top of pagePrevious messageNext messageBottom of page Link to this message

andygoodwin
Visitor
Posted on Thursday, December 25, 2008 - 02:48 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I am looking for a low oil pressure switch, for a RM 80 Ruggerini engine. Thread size 8mm.
On a Mase 3500kw generator.
Help to find this part would be good.
Regards Stuart Goodwin
Top of pagePrevious messageNext messageBottom of page Link to this message

dfeaman
New member
Username: dfeaman

Post Number: 1
Registered: 01-2009
Posted on Wednesday, January 07, 2009 - 03:58 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have a RDM 901ruggerini MASE generator. It came off of a boat and it's in a Metal cabinet named "MASE". When it was taken off the boat they cut things off of it and made a mess of things.I'm looking for a picture of this generator in it's cabinet by "MASE" so I can see what I'm missing and how it should go back together (things like switches, electrical connections, cooling etc.. I Also have a complete manual for the RDM 901. I can scan specific pages and email them to those who need them.
Top of pagePrevious messageNext messageBottom of page Link to this message

R VAUGHAN
Visitor
Posted on Wednesday, March 04, 2009 - 10:17 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

hi i have a ruggerini rd200 air cooled can anyone tell me what hp this engine has
thanks rob
Top of pagePrevious messageNext messageBottom of page Link to this message

macspud
New member
Username: macspud

Post Number: 1
Registered: 03-2009
Posted on Friday, March 20, 2009 - 12:01 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Does anyone know about ruggerini? I am looking for information on a MD 350 ruggerini. Can anyone tell me about it?
Top of pagePrevious messageNext messageBottom of page Link to this message

schalk bothma
Visitor
Posted on Thursday, April 09, 2009 - 03:11 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

HI there

What should the oil pressure be of a 1 cylinder ruggerine RD80 be?
thanks
Top of pagePrevious messageNext messageBottom of page Link to this message

humber38
Visitor
Posted on Tuesday, April 14, 2009 - 03:58 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I am looking for a service manual or a source of any information relating to a Ruggerini RM80 as fitted to a MASE 3500 marine generator set. Also a source for parts ideally within the UK. Can anybody help?.
Top of pagePrevious messageNext messageBottom of page Link to this message

JimW
Visitor
Posted on Thursday, July 30, 2009 - 05:52 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Hi, I've just put an RD 901 on ebay (item no 260456077007) and found this site while looking for info on it. I've never had it running but it might be useful to somebody.
Top of pagePrevious messageNext messageBottom of page Link to this message

ernvell
New member
Username: ernvell

Post Number: 1
Registered: 08-2009
Posted on Saturday, August 01, 2009 - 04:24 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

HI I NEED TO BUY A TEMPERATURE SENSOR / TRANSMITTER FOR MY RUGGERINI MM 150 MARINE. CAN ANYONE HELP PLEASE ?
Top of pagePrevious messageNext messageBottom of page Link to this message

Steve W
Visitor
Posted on Sunday, October 11, 2009 - 11:22 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Due to lack of spares I will be replacing to perfectly good Ruggerini MM150's
They are good runners but are connected to Selva sail drives which I am retaining so no gearboxes.
Available from march 2010 with harness instrument pannel and books
Top of pagePrevious messageNext messageBottom of page Link to this message

Victor Chircop
Visitor
Posted on Wednesday, November 11, 2009 - 10:20 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I need a cylinder head for an RDM 901 Ruggerini marine. Anyone can help please?

victor
Top of pagePrevious messageNext messageBottom of page Link to this message

ken moxon
Visitor
Posted on Saturday, January 23, 2010 - 08:03 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Hi from ken moxon at sound yachts i have a rugarani engine rdm 901 in my workshop its being used as gen set, its done 40 hours but may be more as i will use it for running equipment its for sale as a complete unit if anybody wants it its a marine unit
Top of pagePrevious messageNext messageBottom of page Link to this message

matt_morehouse
Member
Username: matt_morehouse

Post Number: 12
Registered: 12-2009
Posted on Saturday, January 23, 2010 - 10:44 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I would be interested. Call me at 707-268-8514 or email <[email protected]>
Top of pagePrevious messageNext messageBottom of page Link to this message

chirv001
New member
Username: chirv001

Post Number: 1
Registered: 12-2009
Posted on Sunday, January 31, 2010 - 04:12 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Hello Ken,

Send me all the information via email
[email protected] please.

regards

victor
Top of pagePrevious messageNext messageBottom of page Link to this message

paul cobb
Visitor
Posted on Tuesday, August 17, 2010 - 05:49 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

anyone know where i can get rings and headset for my aircooled welder genset, i think its ruggerini, no R 0331/906973 R
Top of pagePrevious messageNext messageBottom of page Link to this message

jheldatksuedu
Member
Username: jheldatksuedu

Post Number: 7
Registered: 05-2010
Posted on Wednesday, September 22, 2010 - 08:57 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I just bought a Ruggerini 2 cylinder air cooled diesel, I know nothing more about it. It looks brand new, runs great, and was priced right, that's why I bought it. I guess it's about 18 hp or so. I expect it was new 15 to 20 years ago or so.

If you know or have any info on this please send me an email [email protected] Thanks Jon

details:
TRD2 655 1 3600rpm
spec no 711024 R
R0377/802230
(eco or 300).151
Teledyne total power, memphis tn
Top of pagePrevious messageNext messageBottom of page Link to this message

jheldatksuedu
Member
Username: jheldatksuedu

Post Number: 8
Registered: 05-2010
Posted on Wednesday, September 22, 2010 - 10:04 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

It's 16 hp, I found it was also used by Deutz, mine was Wisconsin.

Here is a link to a pdf workshop manual, the md 151 is the same engine and the key numbers to search for.

http://boatservicehaarlem.nl/linked/ruggerini_workshop_20manual_20md150-191.pdf

Jon Held

Web site http://www.jheld.mysite.com
Top of pagePrevious messageNext messageBottom of page Link to this message

christjan_est
Visitor
Posted on Sunday, March 13, 2011 - 12:28 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Please help me with Ruggerini CRDK 100. Is there any info or manual or pictures for this diesel???
anything!
Top of pagePrevious messageNext messageBottom of page Link to this message

moararat54
New member
Username: moararat54

Post Number: 1
Registered: 03-2011
Posted on Friday, March 18, 2011 - 01:31 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I want parts of ruggerini marine diesel MM150
a)Electromagnetic valve to out put the motor.
b)Pump of sweet water.
Anyone knowes;
Top of pagePrevious messageNext messageBottom of page Link to this message

gack
New member
Username: gack

Post Number: 1
Registered: 06-2011
Posted on Tuesday, June 14, 2011 - 12:13 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I am also looking for parts for the MM150 diesel engine, specifically the water pump.

Anyone having knowledge of where to get parts for this oldtimer nowadays ?

Thanks, Jens
Top of pagePrevious messageNext messageBottom of page Link to this message

gack
New member
Username: gack

Post Number: 2
Registered: 06-2011
Posted on Wednesday, June 15, 2011 - 11:17 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

You can mail me also, [email protected]

Thanks, Jens
Top of pagePrevious messageNext messageBottom of page Link to this message

Andrew jones
Visitor
Posted on Friday, July 15, 2011 - 03:12 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Hi

Any links to ruggerini RM80 spare parts? Suppliers? I need an impellor.

Thx Andrew
Top of pagePrevious messageNext messageBottom of page Link to this message

James L. Mebane
Visitor
Posted on Wednesday, September 14, 2011 - 05:09 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Need standard piston & rod for Ruggerini RD 952
Top of pagePrevious messageNext messageBottom of page Link to this message

James L. Mebane
Visitor
Posted on Friday, September 16, 2011 - 12:36 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Need standard piston & rod for Ruggerini RD 952
j,[email protected]
Top of pagePrevious messageNext messageBottom of page Link to this message

Duane Henry
Visitor
Posted on Monday, October 24, 2011 - 06:22 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have a rdm 901 diesel motor with genorator atached one complet unit.Came out of 1975 Yorktown sailboat 35 ft.needs exaust manafold.Open to all offers. please send e-mail [email protected] maybe the last complet motor,genset.
Top of pagePrevious messageNext messageBottom of page Link to this message

betodisse
New member
Username: betodisse

Post Number: 1
Registered: 03-2012
Posted on Monday, March 12, 2012 - 09:13 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I need specifications, Service Manual and Parts Manual of a RUGGERINI engine.

My engine number is 80120408, he was mounted in Brazil by TIET� in 1980, the model is RD950.
Is a Single cylinder, Diesel 16 Hp. air cooled.
Top of pagePrevious messageNext messageBottom of page Link to this message

Volker Engelhardt
Visitor
Posted on Monday, April 02, 2012 - 05:20 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Hi together,
i need the tightening torque for the cylinder head bolts of an Ruggerini RM 270.

Can anybody help me please ?

Or have anybody a repairmanual for these engine ?

Thanks

Voolga
Top of pagePrevious messageNext messageBottom of page Link to this message

romat
New member
Username: romat

Post Number: 1
Registered: 05-2012
Posted on Saturday, May 12, 2012 - 07:27 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Hi all
I live at Cahora Bassa in Mozambique and have recently purchased a 1981 Finnspeed 14M ex commercial fishing vessel that I am revamping for pleasure fishing. On board it has a Ruggerini generator Type RDM 901
RPM 2800
Matricola 001028
P Max Eserciz 12
P Continuat Iva 11
I need to strip and service replacing any damaged part � the fly wheel has a few chipped teeth
I would really appreciate any information regarding this Ruggerini as I live in such a remote area
Many thank and regards, Roy Matthews
Songo, Cahora Bassa,
Tete Province, Mozambique
Email: [email protected]
Top of pagePrevious messageNext messageBottom of page Link to this message

colin leask
Visitor
Posted on Monday, August 06, 2012 - 03:50 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

hi have a ruggerini F15 diesel outboard has rocker cover missing and rocker arm missing on one cylinder motor turns over freely looking to sell if anyone interested email me [email protected] cheers ps is the f15 engine the same as a md150 generator engine thanks
Top of pagePrevious messageNext messageBottom of page Link to this message

striker
New member
Username: striker

Post Number: 2
Registered: 04-2014
Posted on Thursday, April 24, 2014 - 05:42 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have a mase rm 80 gen set fitted with a ruggerini single cylinder diesel + owner manual , selling gen as seen or as parts.
Top of pagePrevious messageNext messageBottom of page Link to this message

maha
New member
Username: maha

Post Number: 1
Registered: 04-2014
Posted on Monday, April 28, 2014 - 08:57 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Disassemble 220v generator from RM901

Does anybody have the experience about dismount the 220V generator from the engine RM901, I can�t get the stator away from the axel and I tried everything except the right thing?:-) .

I don�t have the service manual just the parts guide and what I can see there is no sprint to remove to get it loose.

Or do anyone have one for sale?
Top of pagePrevious messageNext messageBottom of page Link to this message

donmitch
Visitor
Posted on Wednesday, June 11, 2014 - 05:55 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have a mid to late 80's sea water cooled, 4 KW Mariner gen-set Model MG4D, with a Mase alternator coupled to a Ruggerini engine. The name plate on the engine reads "engine #R1.81". Does this number indicate to anyone the model of the engine?
Am looking for parts to rebuild the engine. Where can I find them? Any suggestions are welcome
Thanks
Top of pagePrevious messageNext messageBottom of page Link to this message

Christian turcotte
Visitor
Posted on Friday, July 04, 2014 - 06:11 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I need valve clearance for ruggurini rm81 motor 42040

Many thanks
Top of pagePrevious messageNext messageBottom of page Link to this message

msing699
New member
Username: msing699

Post Number: 1
Registered: 07-2014
Posted on Tuesday, July 22, 2014 - 09:02 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Looking for a complete wiring harness with the key box for a RD 270 motor
Top of pagePrevious messageNext messageBottom of page Link to this message

alpitcairn
New member
Username: alpitcairn

Post Number: 1
Registered: 04-2015
Posted on Saturday, April 11, 2015 - 10:41 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Ruggerini RDM 901 Marine diesel generator.
I need a new Rotor for this Generator, does anyone know where I can source ? Any other spare parts I would also be interested in .
Thanks
Top of pagePrevious messageNext messageBottom of page Link to this message

Bill wyman
Visitor
Posted on Sunday, September 27, 2015 - 02:10 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I am looking for a top end rebuild kit and one pushrod for a rd 952 ruggerini.thanks,Bill
Top of pagePrevious messageNext messageBottom of page Link to this message

alpitcairn
New member
Username: alpitcairn

Post Number: 2
Registered: 04-2015
Posted on Monday, September 28, 2015 - 11:02 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Ruggerini RDM 901 Marine diesel generator.
I wanted a new Rotor but have not found one , so decided to replace the generator with another new genset.
That means I have the whole RDM 901 to sell, which as a diesel engine runs fine. there was never anything wrong with the diesel side of the generator. I will sell as a whole or broken down for parts, piston, head, block etc, The bits need cleaning up but otherwise are sound. If interested email me and I will send photos of what there is. No idea of pricing, I just want to get rid as its taking up space.
Top of pagePrevious messageNext messageBottom of page Link to this message

jan Daugaard
Visitor
Posted on Wednesday, October 28, 2015 - 12:07 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Hi i want. An exhaust manifold to a RDM 910 marinegenerator. Best Regards Jan
Top of pagePrevious messageNext messageBottom of page Link to this message

Irish
Visitor
Posted on Thursday, September 22, 2016 - 07:45 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Hi
I am looking for part number 132 for a ruggerini F15 .The part number is from the original spare parts catalog .
Hope someone can help
Top of pagePrevious messageNext messageBottom of page Link to this message

pete_darlow
New member
Username: pete_darlow

Post Number: 1
Registered: 01-2017
Posted on Monday, January 30, 2017 - 03:53 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Hi,I'm looking for a bellhousing for a Ruggerini mm150, any leads appreciated.
Top of pagePrevious messageNext messageBottom of page Link to this message

ricky1
New member
Username: ricky1

Post Number: 1
Registered: 01-2018
Posted on Wednesday, January 17, 2018 - 07:29 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Ihave purchased a
RD92/2 Ruggerini motor generator. I have no specifications for this machine. I do not know what fuel this motor uses as I have checked on the tank and it smells like paraffin. Can you help with the type of fuel this motor uses and the size of the battery.
Top of pagePrevious messageNext messageBottom of page Link to this message

Geoff Hayton
Visitor
Posted on Sunday, April 22, 2018 - 05:14 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Ruggerini RM 80 Cooling Circuit- Does anyone know if the raw water inlet to the exhaust is a union with a very small hole, c 2mm in diameter. Looks much smaller than I am used to seeing on other makes?
Top of pagePrevious messageNext messageBottom of page Link to this message

leandro juarez
Visitor
Posted on Saturday, June 09, 2018 - 06:19 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I own a Ruggerini RM 90. and need to find piece listing sketch, and a suplier for spare parts. If anyone can help with this e-mail me at [email protected]
Top of pagePrevious messageNext messageBottom of page Link to this message

leandro juarez
Visitor
Posted on Saturday, June 09, 2018 - 06:23 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Hi. I need spare parts listing and wiring map of Ruggerini RM 90. Please e-mail me at [email protected] if you have any information about this motor. It would be a big help!
Top of pagePrevious messageNext messageBottom of page Link to this message

kokostar
New member
Username: kokostar

Post Number: 1
Registered: 07-2021
Posted on Monday, July 05, 2021 - 03:42 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Hello I own Ruggerini MM150 and needs a spare part which is attached to the convertor, where the wather go out. The numbers in my catalog are:
510-64
450-35
992-17 x2
Top of pagePrevious messageNext messageBottom of page Link to this message

kokostar
New member
Username: kokostar

Post Number: 2
Registered: 07-2021
Posted on Monday, July 12, 2021 - 03:40 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Hello, I ma looking for ruggerini mm 191 exhaust mixing elbow, Help please!
Top of pagePrevious messageNext messageBottom of page Link to this message

davidzet
New member
Username: davidzet

Post Number: 1
Registered: 11-2021
Posted on Wednesday, November 17, 2021 - 12:00 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Hi all - I have a Ruggerini MM150 in my sailboat. It's at least 25 years old, and (it seems) not easy to find parts. So I am looking for (1) a diesel of the same size that I can swap in OR another MM150 that's in decent condition.

I'm in The Netherlands (Amsterdam)
Top of pagePrevious messageNext messageBottom of page Link to this message

88chromium123
New member
Username: 88chromium123

Post Number: 1
Registered: 01-2022
Posted on Monday, January 10, 2022 - 02:32 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Hi
I am looking for Water and Exhuast gas mixer collector.
(Exhaust Manifold) Part Number 215-09
For RDM901

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Password:
E-mail:
Options: Automatically activate URLs in message
Action:

Administration Administration Log Out Log Out   Previous Page Previous Page Next Page Next Page

Home | Classifieds | History | Technical | Links | Store | About Us | Email
&copy 2005 OldMarineEngine.com, P.O. Box 188, Forest Dale, VT 05745-0188 • Phone: 802-247-4864 • All rights reserved.
   Marine Engine Seloc Repair Manual Lookup Tool

marine gas engine repair and restoration