Home | Classifieds | History | Technical | Links | Store | About Us | Email
Topics Topics Edit Profile Profile Help/Instructions Help Member List Register  
Search Last 1|3|7 Days Search Search Tree View Tree View  

Palmer BH 25

Old Marine Engine » Palmer Engine Co » Palmer BH 25 « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

rick intravia
New member
Username: everafter

Post Number: 1
Registered: 07-2011
Posted on Monday, July 11, 2011 - 08:51 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

After an eight year delay I am finally getting things done on my old boat and palmer, sn. 3631756. I had to put this on hold but now the carb has been rebuilt and all is well with the engine so far. I would like to paint it close to the original color and replace the impeller for the water pump. I figure the impeller is shot as this has been stored for decades now. Any thoughts on where to get one. Thanks, I will post pics as soon as i figure out my smart phone which makes me really feel stupid sometimes.
Top of pagePrevious messageNext messageBottom of page Link to this message

Ernie
Senior Member
Username: ernie

Post Number: 1371
Registered: 01-2002


Posted on Tuesday, July 12, 2011 - 08:00 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Here is the tag for Rick's Engine
Top of pagePrevious messageNext messageBottom of page Link to this message

Ernie
Senior Member
Username: ernie

Post Number: 1372
Registered: 01-2002


Posted on Tuesday, July 12, 2011 - 08:03 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Since it appears that you are from CT why don't you bring it to Mystic next month. Or at least come down for the Antique Marine Engine Show.
Sign up info is on the OME front page
Ernie
Top of pagePrevious messageNext messageBottom of page Link to this message

rick intravia
New member
Username: everafter

Post Number: 2
Registered: 07-2011
Posted on Tuesday, July 12, 2011 - 10:05 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Thanks for posting the name plate. I will make every effort to aattend the boat show next month. I don't know how far along the boat will be but if she has paint she will be there as a work in progress.
Top of pagePrevious messageNext messageBottom of page Link to this message

Ernie
Senior Member
Username: ernie

Post Number: 1373
Registered: 01-2002


Posted on Wednesday, July 13, 2011 - 10:33 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Ricks Boat
Hope to see it at Mystic in a few weeks

Top of pagePrevious messageNext messageBottom of page Link to this message

Ernie
Senior Member
Username: ernie

Post Number: 1374
Registered: 01-2002


Posted on Thursday, July 14, 2011 - 07:50 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

More of Rick's Pics


Top of pagePrevious messageNext messageBottom of page Link to this message

rick intravia
New member
Username: everafter

Post Number: 3
Registered: 07-2011
Posted on Saturday, July 23, 2011 - 06:45 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

A public thanks to Ernie for helping post the pics. I just can't seem to get them to post from my computer or phone. Files too large. Anyways, the jug is off and being honed to get rid of a tight spot at the bottom of the stroke. The rest of the engine is cleaned out with risloneL (not running, just by hand) and will be flushed out. There are a couple of cracks in the water jacket that we fixed with JB Weld and when it runs it will get a fresh coat of paint (grey of course) and will make its appearance at the show next month in Mystic. The boat is still a tedious task of stripping the inside with a heat gun etc. 104 degrees this weekend but the work goes on. I look forward to meeting some of you in August. Do you guys have a booth or some way of putting a face with the names? See you then, Rick
Top of pagePrevious messageNext messageBottom of page Link to this message

Ernie
Senior Member
Username: ernie

Post Number: 1376
Registered: 01-2002


Posted on Sunday, July 24, 2011 - 07:35 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Rick,
The engine exposition is in the ship yard which is a small area (not like trying to find someone at the Seaport somewhere)
Just ask and someone will point one of us out to you. Most of us know everyone or most everyone as the is the 20th year.

As to your pics they are huge and not really a JPG format. I have to open them with MS pic and fax and save a a bitmap then save that as a JPG and then resize it. The max size here is 100K
Ernie
Top of pagePrevious messageNext messageBottom of page Link to this message

rick intravia
Member
Username: everafter

Post Number: 4
Registered: 07-2011
Posted on Sunday, July 24, 2011 - 02:45 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Thanks Ernie, MS, fax, bitmap and JPG? Sounds like a job for my daughter. Thanks and I will see you in August.
Top of pagePrevious messageNext messageBottom of page Link to this message

rick intravia
Member
Username: everafter

Post Number: 5
Registered: 07-2011
Posted on Friday, August 05, 2011 - 09:48 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have the engine running but it needs to have the bore honed better that I could and new rings. I have to find a head gasket or see if gaskets to go has them. I could send them mine to copy. Here is a link to youtube for a short clip of it running. Too much blow-by to bring to Mystic but I will attend to learn more and say hi.http://youtu.be/lWD_qNjRlw8
Top of pagePrevious messageNext messageBottom of page Link to this message

rick intravia
Member
Username: everafter

Post Number: 6
Registered: 07-2011
Posted on Friday, August 05, 2011 - 09:51 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Palmer BH-25. I posted a bad link. This may work better, http://www.youtube.com/watch?v=lWD_qNjRlw8
Top of pagePrevious messageNext messageBottom of page Link to this message

Richard A. Day Jr.
Senior Member
Username: richardday

Post Number: 975
Registered: 11-2003


Posted on Friday, August 05, 2011 - 11:28 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Rick I bought 6 BH gaskets in case other might need them. I paid $18.00 each and they are very good gaskets. I will send you one for $18.00 plus mailing which won't be much and you won't have to deal with Pay Pal etc.
Top of pagePrevious messageNext messageBottom of page Link to this message

Ernie
Senior Member
Username: ernie

Post Number: 1393
Registered: 01-2002


Posted on Friday, August 05, 2011 - 11:39 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Neat!
We are fearuring Palmer Engines at Mystic this year. Please just bring it running or not to help with the Palmer display. We don't care if it has blow by. Also there may be a breather problem as it has a check valve in it and if that is the issue one of us can assist.
Top of pagePrevious messageNext messageBottom of page Link to this message

rick intravia
Member
Username: everafter

Post Number: 7
Registered: 07-2011
Posted on Friday, August 05, 2011 - 04:59 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Ok guys, you have me motivated. Rick, I think I have your address or you can email it to me and I will fire off a check tomorrow or send it with a total and I will send it out asap. I just dropped the jug off at the mechanic who will lap or mill the bore, set up new rings and a new piston if needed. I do need some help in the right gasket material for the valve cover and block-to-jug gasket. It seems to be about .030 paper material. I can get any material I need so let me know from your experience what is best. I should have the jug back in a day or two so I will have her together by next weekend and ready for paint. I will send in my registration for the engine show but I can only be there on Sunday. I look forwards to meeting you all and to thank you for your support and information. Got to get a priming cup too and I found those on line for 22 bucks. See you all in a couple of weeks. I have to get back to stripping the inside of the boat now. That will be ready for next year. Thanks, Rick
Top of pagePrevious messageNext messageBottom of page Link to this message

rick intravia
Member
Username: everafter

Post Number: 8
Registered: 07-2011
Posted on Monday, August 08, 2011 - 05:47 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

The jug needs to be bored out. I have to either locate an oversized piston or sleeve the cylinder. My machinist feel that sleeving the bore is the most cost effective but wants to know the thickness of the sleeve wall. Less than two weeks to Mystic and the pressure (in a good way) is on. Calling all experts to help as this is my first old engine. The sleeve seems to make the most sense I just didn't give much thought to the wall thickness.
Top of pagePrevious messageNext messageBottom of page Link to this message

Ernie
Senior Member
Username: ernie

Post Number: 1402
Registered: 01-2002


Posted on Tuesday, August 09, 2011 - 08:04 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Rick,
Call Rays Auto Parts in Little Compton, RI.
He will most likely have the piston you need. Make sure he knows it is a "flat top"
Ray Helger's World-o-car Parts telephone number is (401) 635-4849.
Top of pagePrevious messageNext messageBottom of page Link to this message

rick intravia
Member
Username: everafter

Post Number: 9
Registered: 07-2011
Posted on Tuesday, August 09, 2011 - 02:35 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Thanks Ernie. I am going up Friday to pick up a piston. Ray sounds like a pretty colorful and interesting fellow. Very helpful.
Top of pagePrevious messageNext messageBottom of page Link to this message

Ernie
Senior Member
Username: ernie

Post Number: 1403
Registered: 01-2002


Posted on Tuesday, August 09, 2011 - 03:02 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

It won't be a quick visit unless he is real busy. I hope you like outboards as well as cars.
By the way if he doesn't have a "flat top" one the ones with a dome can be cut flat if need be.
Top of pagePrevious messageNext messageBottom of page Link to this message

David C. Dunbar
Member
Username: david_in_ma

Post Number: 15
Registered: 03-2010
Posted on Tuesday, August 09, 2011 - 04:33 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Rick,
Just saw Ernie's reply. Ernie is a knowledgeable man, but I wholeheartedly disagree on this subject. Don't cut a domed piston top flat!!! It will be very thin at center and probably burn thru. It gets the hottest at center. Look inside the crown and notice it's also domed. We measure crown thickness when any special milling takes place. Get the flat top. David
Top of pagePrevious messageNext messageBottom of page Link to this message

rick intravia
Member
Username: everafter

Post Number: 10
Registered: 07-2011
Posted on Tuesday, August 09, 2011 - 06:31 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Well, Ray has flat top pistons and being a marine engine guy with hundreds of engines he understood why I only needed one piston. I look forward to meeting him and getting some chowder when in RI. That is the only real chowder. I may even have the paint dry in time for the show. Thanks to all, more to follow.
Top of pagePrevious messageNext messageBottom of page Link to this message

Ernie
Senior Member
Username: ernie

Post Number: 1404
Registered: 01-2002


Posted on Tuesday, August 09, 2011 - 08:07 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

David,
I had 2 dome top ones. I cut the first piston in half to see how thick it was. The inside is the same on both the flat top and the dome top.
Ernie
Top of pagePrevious messageNext messageBottom of page Link to this message

John W Clough
Member
Username: cluffermon

Post Number: 15
Registered: 08-2008
Posted on Tuesday, August 09, 2011 - 09:48 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have several oversize Ford pistons for the BH if you have no luck. I bought 6-8 NOS pistons and used one for my 1952 BH.
I'd have to check tomorrow for the + sizes that I have. I think I have several sizes.
If you bore/hone, don't you need to know when cyclindar is finished before you select piston size?
Top of pagePrevious messageNext messageBottom of page Link to this message

rick intravia
Member
Username: everafter

Post Number: 11
Registered: 07-2011
Posted on Wednesday, August 10, 2011 - 07:26 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Thanks John. My mechanisc bored and honed the jug already to determine the piston size. I have to put some trust in his ability. We will see what the outcome is. I do appreciate the offer...Rick
Top of pagePrevious messageNext messageBottom of page Link to this message

David C. Dunbar
Member
Username: david_in_ma

Post Number: 16
Registered: 03-2010
Posted on Wednesday, August 10, 2011 - 07:40 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

John,
Usually you bore on the premise that an available piston can be utilized. Example: Should a dial indicator show no wear at bottom of cyl and the top area shows .012" wear, you might do a trial bore (centering on unworn area) figuring on a .020 oversize piston. You would stop boring at .017" over std bore size. Assuming all wear cleared, then order your piston. Measure it. Pistons as well as all parts can vary. It may be marked +.020 but may be +/- a thou or more!!.Having mic'd the piston in the mfg's noted spot, you can now hone that last .003" or so to have the suggested factory clearance. Never bore "to size". Always leave at least .003 or more for progressive grit honing. All piston mfg's have different specs. One size does not fit all. I do many cyls calling for .0005"(that's a half of one thou). Others that call for .016". David
Top of pagePrevious messageNext messageBottom of page Link to this message

David C. Dunbar
Member
Username: david_in_ma

Post Number: 17
Registered: 03-2010
Posted on Wednesday, August 10, 2011 - 07:49 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

BH series owners,
Be aware that the Ford type piston comes with 2 different depth types of ring grooves called shallow or deep. Measure groove depth. Shallows go in .170-.180" The deep go in .190 or more. Use the correct type. Both have been available for years. David
Top of pagePrevious messageNext messageBottom of page Link to this message

David C. Dunbar
Member
Username: david_in_ma

Post Number: 18
Registered: 03-2010
Posted on Wednesday, August 10, 2011 - 08:07 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Ernie,
Tried to post a reply but lost it. 2nd try. The inside of crown can vary amongst mfgs. That's why I posted the caution. Crown thickness is quick and easy to check. All pistons on all engines I build get checked. Valve pocket areas are vulnerable on OHV engs. David
Top of pagePrevious messageNext messageBottom of page Link to this message

rick intravia
Member
Username: everafter

Post Number: 12
Registered: 07-2011
Posted on Friday, August 12, 2011 - 02:31 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Just picked up a Ford piston .020 over from Ray. What a great place and outgoing person he is. Fun time. Now back to work on the engine. The clock is ticking.
Top of pagePrevious messageNext messageBottom of page Link to this message

rick intravia
Member
Username: everafter

Post Number: 13
Registered: 07-2011
Posted on Thursday, August 18, 2011 - 07:26 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

It is getting down to the wire. I thought I would have the cylinder in my hands today until the machinist called to ask the piston to bore clearance size. That is not in the manual so he got a "duh" out of me. One call to David Dunbar and he called me back with the information so I will have it on Friday morning. We will put it together, a little touch-up paint and some more JB Weld for the head and get her up to Mystic on Sunday. Save me a spot. There is still some ooze from around the spots I filled with the epoxy. It is probably the corrosion that can not be readily stopped as this was a salt water engine. I will run it as long as possible until I find a fresh water engine. A little hectic now but it is all worth it. Thank you again David for the response in my time of "duh" See you on Sunday. Rick
Top of pagePrevious messageNext messageBottom of page Link to this message

rick intravia
Member
Username: everafter

Post Number: 14
Registered: 07-2011
Posted on Friday, August 19, 2011 - 06:02 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Not a greaat video but it is done and ready for Sunday at Mystic. Could not have done it help from OME members. Thank you all. http://www.youtube.com/watch?v=LYrTISYwIrY&feature=player
Top of pagePrevious messageNext messageBottom of page Link to this message

Ernie
Senior Member
Username: ernie

Post Number: 1415
Registered: 01-2002


Posted on Friday, August 19, 2011 - 06:06 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Looking forward to seeing it run
Top of pagePrevious messageNext messageBottom of page Link to this message

rick intravia
Member
Username: everafter

Post Number: 15
Registered: 07-2011
Posted on Thursday, September 22, 2011 - 07:59 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Just and update on the boat. Still stripping paint and getting closer to paint and caulk. The engine still has some leaks out of the head but I can live with it for now. To get the boat where I would like it I will be looking for a new/used head that was not in salt water or a fresh water engine for the future. I will be checking the web and search for these, either parts or a complete engine for a reasonable market price. If anyone has parts, engine or information please let me know. More pics to follow as the paint goes on. P.S. Mystic was a blast!
Top of pagePrevious messageNext messageBottom of page Link to this message

Ernie
Senior Member
Username: ernie

Post Number: 1443
Registered: 01-2002


Posted on Saturday, September 24, 2011 - 04:13 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Rick,
I sent you an e-mail and it bounced back. Send me an e-mail I may have found an engine for you.
Ernie
Top of pagePrevious messageNext messageBottom of page Link to this message

rick intravia
Member
Username: everafter

Post Number: 16
Registered: 07-2011
Posted on Monday, September 26, 2011 - 07:49 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I sent you an email Ernie with my phone # too. I look froward to hearing about the engine. Just finished all the sanding on the boat and will now seal, caulk paint and so forth. At least this is the fun part of putting it back together. Hard to believe but painting is really more fun than stripping, scraping and sanding.
Top of pagePrevious messageNext messageBottom of page Link to this message

rick intravia
Member
Username: everafter

Post Number: 17
Registered: 07-2011
Posted on Monday, September 26, 2011 - 02:05 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I had a typo on my profile on my email. All correct now.
Top of pagePrevious messageNext messageBottom of page Link to this message

rick intravia
Member
Username: everafter

Post Number: 19
Registered: 07-2011
Posted on Sunday, May 13, 2012 - 01:10 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Just an update. The boat is all sealed with CESP and ready for the next step. Caulk and paint. We will be done for Mystic.
Top of pagePrevious messageNext messageBottom of page Link to this message

rick intravia
Member
Username: everafter

Post Number: 20
Registered: 07-2011
Posted on Sunday, May 13, 2012 - 01:50 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Top of pagePrevious messageNext messageBottom of page Link to this message

rick intravia
Member
Username: everafter

Post Number: 21
Registered: 07-2011
Posted on Sunday, November 10, 2013 - 04:54 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Done! The boat with the bh-25 will be splashed next weekend. Cold or not!1956 boat
Top of pagePrevious messageNext messageBottom of page Link to this message

Ernie
Senior Member
Username: ernie

Post Number: 1758
Registered: 01-2002


Posted on Tuesday, November 12, 2013 - 07:07 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Nice work!
Top of pagePrevious messageNext messageBottom of page Link to this message

rick intravia
Member
Username: everafter

Post Number: 22
Registered: 07-2011
Posted on Sunday, November 17, 2013 - 06:46 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Splashed the boat in the CT river today for its maiden voyage. All went pretty well but the siphon feed for the fuel is too iffy and the engine stalled if the bulb wasn't squeezed. Got about 1800 rpms. With a generator and five people in the boat I don't know if this is top-end. I do need some info on in-line fuel pumps and the recommended fuel pressure. I found one that is 2.5 to 4 psi. Any suggestions would be welcome on top-end and fuel pressure. P.S. It was a blast to hear the putt putt and put it in the water after 35 years. Break-neck speed of about 6 knots.

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Password:
E-mail:
Options: Automatically activate URLs in message
Action:

Administration Administration Log Out Log Out   Previous Page Previous Page Next Page Next Page

Home | Classifieds | History | Technical | Links | Store | About Us | Email
&copy 2005 OldMarineEngine.com, P.O. Box 188, Forest Dale, VT 05745-0188 • Phone: 802-247-4864 • All rights reserved.
   Marine Engine Seloc Repair Manual Lookup Tool

marine gas engine repair and restoration