|
| Author |
Message |
    
J.B. Castagnos
| | Posted on Friday, November 29, 2002 - 08:57 pm: | 
|
Anyone have experience with krice carbs? I ran my St. Lawerence today for the first time. It took quite a bit of tinkering to get the Krice to perform decent. The fuel level is critical, has to be just at the point of flooding over into the overflow before it will stay running. I was running it from a smal tank attached to the carb. If the tank wasn't full it would pull the fuel down in the bowl and start leaning out, seems it needs a bit more head pressure to maintain the level. With the tank full I had it running fairly well but the needle valve is not very sensitive, takes a couple of turns to make a noticable difference. Is this normal for a Krice?
J.B. |
|
|
|
|
