Home | Classifieds | History | Technical | Links | Store | About Us | Email
Topics Topics Edit Profile Profile Help/Instructions Help Member List Register  
Search Last 1|3|7 Days Search Search Tree View Tree View  

Cork Float, tips and tricks

Old Marine Engine » Blaxland » Cork Float, tips and tricks « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Allen Flux
Member
Username: allenf

Post Number: 15
Registered: 02-2011


Posted on Monday, March 19, 2012 - 11:02 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Shellac is the traditional way to prevent the cork float from becoming saturated with fuel and sinking,causing the carburetor to flood.
With the advent of Ethanol (alcohol) fuel, The old shellac lasts about 10 minutes before it dissolves and sinks.
Pipe glue lasts about 15 minutes before the ethanol dissolves it.
However there is light at the end of the tunnel.
I have discovered that by coating my cork fuel floats with several coats of Super Glue that I can now use any fuel I wish.
It is readily available,cheap and very,very quickly ready for use.
Simply apply it with a shrink-wrapped finger.
It does require fast application with obvious consequences if you are not. :-)
Top of pagePrevious messageNext messageBottom of page Link to this message

Chester H. Long
New member
Username: rustyherman

Post Number: 1
Registered: 05-2013
Posted on Tuesday, June 18, 2013 - 10:36 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have a 100 Year Old Gray model "U" single cylinder marine engine with a Krice carburetor that I am restoring. Being frugal, I figured I could make a new carburetor float. I purchased some 3" round laboratory beaker holders. I was able to shape the cork, using a bench grinder and a rotary file in my drill press. I then used a product "sloshing liquid for inside motorcycle gas tanks to prevent rust" to paint the cork three coats. I figured if it is used inside gas tanks it should be GOOD to prevent gas from soaking into cork. This is an experiment and I have no resulting data!
Top of pagePrevious messageNext messageBottom of page Link to this message

Steve Roskowski
Advanced Member
Username: modhydro

Post Number: 47
Registered: 08-2004
Posted on Tuesday, December 15, 2015 - 04:58 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Another great sealer is West epoxy. Since I do boat work as well, I have it in the shop. Just brush on two thin coats and you are all set. It will also bond together broken parts and cracks at the same time. I use it to coat the wooden gas tanks in the hydroplanes I build so I know it is gasoline safe.

Steve

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Password:
E-mail:
Options: Automatically activate URLs in message
Action:

Administration Administration Log Out Log Out   Previous Page Previous Page Next Page Next Page

Home | Classifieds | History | Technical | Links | Store | About Us | Email
&copy 2005 OldMarineEngine.com, P.O. Box 188, Forest Dale, VT 05745-0188 • Phone: 802-247-4864 • All rights reserved.
   Marine Engine Seloc Repair Manual Lookup Tool

marine gas engine repair and restoration