| Author |
Message |
    
Dennis Thompsonm
New member
Username: dennist
Post Number: 1
Registered: 01-2006
| | Posted on Tuesday, January 31, 2006 - 06:39 pm: | 
|
Just looked at an, "Albin Type 0-2," Swedish made engine. Stuff piled around it, hard to see. Looks like 1 or 2 cylinder; oily exterior, stored inside. Can anyone help me understand what this is? I have no background in marine engines. Some insight would be very helpful, or a tip to a website about these engines. I check email and forums about every 3 days. Direct email OK to: [email protected] Thanks, Dennis |
Andrew Menkart
Moderator
Username: andrew
Post Number: 1367
Registered: 11-2001
| | Posted on Tuesday, January 31, 2006 - 07:18 pm: |
|
Are you sure it is a model "O-2" ?
You should probably try to get the exact nameplate data.
Here is a site with some Albin specs and model data.
You can also use the search link at the top of our page and search "albin", but I don't think any will refer to an "O-2". |
Dennis Thompsonm
New member
Username: dennist
Post Number: 2
Registered: 01-2006
| | Posted on Wednesday, February 01, 2006 - 02:47 am: |
|
Thanks. I could not get to all of the engine; covered with a lot of stuff in this fellow's garage. I was not able to see a name or model plate. On the side of the engine, case in the block was, "Type 0-2." That is where I got that designation. Cute little thing. I have no idea what it is worth or if it is usable for anything other than marine application.
Dennis |
Lars Eimar
New member
Username: pontus
Post Number: 1
Registered: 02-2006
| | Posted on Wednesday, February 01, 2006 - 10:49 am: |
|
Albin O2 is made before 1949.From 1949 named O21.
See this site: www.albinmotor.com
Lars |
marc vogelzang
New member
Username: marc_holland
Post Number: 1
Registered: 02-2006
| | Posted on Friday, February 24, 2006 - 02:06 pm: |
|
if you would like to receive more info, you can always contact me, an owner of more O-2's |
Hilf
Visitor
| | Posted on Saturday, April 15, 2006 - 01:24 pm: |
|
someone knowing of the Albin O-21 reverse gear shaft the length of the axle?
It is part no. 9 of page 45 of the reservedeler list of forsmarin.se
We need this to repair the reverse gear. |
vic
Visitor
| | Posted on Sunday, February 25, 2007 - 03:51 pm: |
|
any one intrested in a albin 0411 with gear box,all seems working and free,i got it with a boat but it was not in the boat thanx |
Mark Rottinghuis
New member
Username: maik
Post Number: 1
Registered: 05-2007
| | Posted on Monday, May 28, 2007 - 05:40 pm: |
|
I have an Albin O2, however it stopped running.
Somehow the front cilinder doesn't work, however if I get it running it runs on the back cilinder only. Ignition works, checked visually. The sparkplug of the front cilinder seems oily and wet. What could this mean? Besides, when changing the oil there was lot's water in crankcase. I have changed the waterpump O-ring only a year ago. Does anyone know what could be the cause?
Mark ([email protected]) |
[email protected]
Visitor
| | Posted on Thursday, December 03, 2009 - 02:26 pm: |
|
I have an Albin AD-21. The Transmission stopped working. No forward or reverse. I need parts or a rebuilt. I live in California, USA. A & M doesn't sell parts any more. If anyone can help, please email me, [email protected]
Thank You
Mel Stratton |
