Home | Classifieds | History | Technical | Links | Store | About Us | Email
Topics Topics Edit Profile Profile Help/Instructions Help Member List Register  
Search Last 1|3|7 Days Search Search Tree View Tree View  

Outboard Johnson/Evinrude

Old Marine Engine » Miscellaneous » Outboard Johnson/Evinrude « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

madmec03
New member
Username: madmec03

Post Number: 1
Registered: 06-2007
Posted on Monday, June 18, 2007 - 06:29 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have just bought an old boat with a Johnson/Evinrude 85 HP motor that needs some work. I need to know the year of this motor. The model # is 85ETLB775 The serial # is J4766638. Can any one help?

Thanks, Russell
Top of pagePrevious messageNext messageBottom of page Link to this message

andrew
Moderator
Username: andrew

Post Number: 883
Registered: 11-2001


Posted on Monday, June 18, 2007 - 06:43 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Russell,

It is probably 85ETLR77S not 85ETLB775

That is a 1977. See this link for manuals.

Parts can be found here.

You can ask questions on the board at MarineEngine.com in the Johnson/Evinrude category.
Top of pagePrevious messageNext messageBottom of page Link to this message

wgatormon
New member
Username: wgatormon

Post Number: 1
Registered: 06-2007
Posted on Monday, June 18, 2007 - 08:32 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I just obtained an old Evinrude outboard. It says on it whispering power aquasonis fleet twin 25.The only numbers I can find are as follows:7518-22380 no letters can anyone tell me the year and fuel mixture for this motor? Thanks Walter
Top of pagePrevious messageNext messageBottom of page Link to this message

madmec03
New member
Username: madmec03

Post Number: 2
Registered: 06-2007
Posted on Monday, June 18, 2007 - 09:27 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Andrew,
Thank You it is 85ETLR77S It is worn a bit and couldn't see it well. Thanks for the help.

Russell
Top of pagePrevious messageNext messageBottom of page Link to this message

fluvial
New member
Username: fluvial

Post Number: 1
Registered: 06-2007
Posted on Tuesday, June 19, 2007 - 08:57 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I just purchased an Evinrude Jr outboard model # EJRCDR and serial # B018092 and would like to know more about it. What year was this motor made and what is the horsepower? I think it was made in 1986 but when I check that model year I cannot find this motor.
Top of pagePrevious messageNext messageBottom of page Link to this message

Ben HartLenn
Visitor
Posted on Friday, July 20, 2007 - 01:51 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Can anyone tell me the fuel:oil ratio for a 1993 Johnson 9.9 Model# CJ10RLETR Serial# G 0299 4037 ?!?!?
Top of pagePrevious messageNext messageBottom of page Link to this message

galpin
New member
Username: galpin

Post Number: 1
Registered: 07-2007
Posted on Tuesday, July 31, 2007 - 10:16 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Does anyone have an instruction manual for a Evinrude EJRCDR Junior, 1986 1.2 hp? Specifically, I want to find out the best way of tweaking the air and fuel mixture dials and the throttle lever. You can send me a message at [email protected] and a scanned copy of the manual would also be great.
Top of pagePrevious messageNext messageBottom of page Link to this message

empaynejr
Visitor
Posted on Wednesday, July 16, 2008 - 12:36 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have a 1979 Johnson 6HP, model# 6RL79E, that I use on a 22' sail boat.

I can get it to run just above idle, but when I open the throttle more it just stalls. Any suggestions?
Top of pagePrevious messageNext messageBottom of page Link to this message

mike s.
Visitor
Posted on Monday, February 02, 2009 - 08:37 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

i have johnson or evinrude motor ,twin ,light blue faded name i think it says johnson mod#OD-10 serial#822707 does anyone know hw to tell
Top of pagePrevious messageNext messageBottom of page Link to this message

galpin
New member
Username: galpin

Post Number: 2
Registered: 07-2007
Posted on Monday, February 02, 2009 - 09:19 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Try this web site. It has manuals for lots of engines: Put Evinrude in the product box and go from there. 1986 1.2hp etc. Carburetor Crankshaft&Piston etc.etc.With each of the systems are the part number plus a diagram of the system. http://epc.brp.com/login.aspx?Return...ands=ej&lang=E
Top of pagePrevious messageNext messageBottom of page Link to this message

JOHN SALVAGGIO
Visitor
Posted on Thursday, April 02, 2009 - 02:49 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I HAVE AN 1977 JOHNSON 85HP MODEL 85ETLR77S AND I WAS WONDERING IF THERE IS A SPOT TO PUT A PEE NOZZLE SO I KNOW IF THE WATER IS TRAVELING THOUGH THE MOTOR. ANY ADVICE WOULD HELP
Top of pagePrevious messageNext messageBottom of page Link to this message

dshands
New member
Username: dshands

Post Number: 1
Registered: 05-2009
Posted on Friday, May 08, 2009 - 03:30 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have a 1977 Johnson (Javlin) motor model # 85ETLR77S on my Thompson boat. The problem I have is that sometimes it starts and runs great. Then there are times that it rolls over, but will not fire up it is hit or miss if it'll start. I have a new battery on it. Any suggestions or help would be appreciated.
Top of pagePrevious messageNext messageBottom of page Link to this message

solarrog
Senior Member
Username: solarrog

Post Number: 356
Registered: 03-2002


Posted on Friday, May 08, 2009 - 03:43 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Sounds like its time for an ignition tune up
generally fuel problems are not intermitant
Top of pagePrevious messageNext messageBottom of page Link to this message

ernie
Senior Member
Username: ernie

Post Number: 972
Registered: 01-2002


Posted on Friday, May 08, 2009 - 05:16 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

It should be new enough to have good ignition coils. However it is worth a look. Remove the tin cover in the middle of the flywheel and make sure the coils are not cracked. If they are it will be very obvious and they need to be replaced. If you need replacement coils they are available from www.marineengine.com
Hope this helps
Ernie
Top of pagePrevious messageNext messageBottom of page Link to this message

jb_castagnos
Senior Member
Username: jb_castagnos

Post Number: 451
Registered: 07-2002


Posted on Friday, May 08, 2009 - 06:51 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I think this Javelin is a V4, if so it probably has 4 coils, I would look at the stator or module. The stator can be checked for a/c voltage, I don't know the values, but they were a problem area.
Top of pagePrevious messageNext messageBottom of page Link to this message

dshands
New member
Username: dshands

Post Number: 2
Registered: 05-2009
Posted on Saturday, May 09, 2009 - 05:04 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I'd like to say thankyou to all that replied so quickly to my post. It sounds like my problem will be relatively easy to check and fix. I will check those items soon. It sounds like I'll be boating in no time at all.
Top of pagePrevious messageNext messageBottom of page Link to this message

Bette
Visitor
Posted on Saturday, June 06, 2009 - 12:09 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I just purchased an Evinrude Junior on Ebay - Belgium #B0106869 - JRCDR. Have not received it yet but it was advertised to "run great" and will be used with a fiberglas rowing boat. What should I know about this motor - year of mfg? reputation for reliability, maintenace schedule, etc? Many thanks.
Top of pagePrevious messageNext messageBottom of page Link to this message

dshands
New member
Username: dshands

Post Number: 3
Registered: 05-2009
Posted on Saturday, July 11, 2009 - 05:52 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have a 1977 Johnson outboard motor model # 85ETLR77S on my Thompson boat. The problem I have is that when I put the boat in reverse, it's like it dosen't catch. Eventually it does go into gear, but not after it makes a noise like something is missing. I have no issues with the forward gear. I've been told that my linkage needs to be adjusted. Two years ago I had new throttle cables installed. How hard is it to properly adjust the linkage if this is the problem. This problem just started.
Top of pagePrevious messageNext messageBottom of page Link to this message

joshkuchinka
Visitor
Posted on Thursday, October 29, 2009 - 09:11 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I replaced my inpeller on my 73 25 hp evinrude. Put it all back together, and no forward. only reverse and neutral. I messed with the linkage through the access on the side of the motor, but nothing what should I do next??
Top of pagePrevious messageNext messageBottom of page Link to this message

james t halcrow
Visitor
Posted on Saturday, March 19, 2011 - 07:21 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

dont know year or model number of my 5.1 johnson outboard motor. searial number is 1213112. got this number from freeze plug.can tou help?
Top of pagePrevious messageNext messageBottom of page Link to this message

Lisa Forbes
Visitor
Posted on Saturday, July 30, 2011 - 06:36 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

We have a 1992 Evinrude 115 outboard motor. Sometimes it runs great then it will just start sputting and looses power. It idles fine all the time. We have new spark plugs, new hoses, new carborator kits. We are frustrated. Can anyone offer some suggestions?
Top of pagePrevious messageNext messageBottom of page Link to this message

solarrog
Senior Member
Username: solarrog

Post Number: 490
Registered: 03-2002


Posted on Saturday, July 30, 2011 - 06:50 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

HAVE YOU CHANGED THE WATER PUMP IMPELLER?
they will do things like this when they get hot. I will leave all the tuning advise to others
Roger
Top of pagePrevious messageNext messageBottom of page Link to this message

ericwillis
Visitor
Posted on Friday, November 04, 2011 - 05:39 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

i have a 79 100 hp johnson in good running order whats it worth
Top of pagePrevious messageNext messageBottom of page Link to this message

terry hawkes
Visitor
Posted on Saturday, November 24, 2012 - 06:35 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

hi i have a 1980 85hp johnsons out board it wont start it turns over and has good compresion if i spray some easy start in the carbs it revs and stops but thats all i can get any ideas thanks teryy
Top of pagePrevious messageNext messageBottom of page Link to this message

Corey DeMerchant
Visitor
Posted on Wednesday, September 18, 2013 - 11:27 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

i have a 1977 johnson 85 hp v4 how do you get the dam prop shaft out? i got the bearing carreer out and the 2 c clips out but cant remove prop shaft...do i have to drop the foot and remove the shift link? is the shift link holding the prop shaft? can someone reply to my email plz its [email protected]
Top of pagePrevious messageNext messageBottom of page Link to this message

aaronwatkins
Visitor
Posted on Tuesday, September 24, 2013 - 08:02 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have a 79 Johnson javelin 85hp. I have a hard time stating it an it staying running. but when it finally starts an runs for about 30 mins it has no prob starting or running after that it can sit for hours an it will fire right up an run with no prob. just when I first go to launch or days later like when the motor is cold I have a hard time starting an keeping it running any suggestions.
Top of pagePrevious messageNext messageBottom of page Link to this message

solarrog
Senior Member
Username: solarrog

Post Number: 558
Registered: 03-2002


Posted on Tuesday, September 24, 2013 - 08:26 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Sounds like the fuel pump is up to par
Top of pagePrevious messageNext messageBottom of page Link to this message

solarrog
Senior Member
Username: solarrog

Post Number: 559
Registered: 03-2002


Posted on Tuesday, September 24, 2013 - 08:34 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

**** Not up to par
oops
Top of pagePrevious messageNext messageBottom of page Link to this message

jason_12
New member
Username: jason_12

Post Number: 1
Registered: 10-2013
Posted on Wednesday, October 09, 2013 - 08:09 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have a 6 hp evinrude don't know the year but the model number is 6702s-E14484 and I broke the rip cord on it and don't know how to put a new one on please help urgent !!!
Top of pagePrevious messageNext messageBottom of page Link to this message

warrin b
Visitor
Posted on Sunday, May 04, 2014 - 08:38 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have a 1976 by before Johnson 85 horsepower it idles great but when I go to put it in drive it goes dead like it doesn't want to get gas any suggestions?
Top of pagePrevious messageNext messageBottom of page Link to this message

Ryanbrettingham
Visitor
Posted on Monday, May 26, 2014 - 06:11 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have a 85 evinrude when I take it out on the water it'll take a good 5 mins to get it to start. It'll roll over but don't fire right off the bat. The way I get it started is to keep messing with the choke and the fuel bulb an when it fires and start ill hurry and push the throttle down. After that i can fire it right up but if i let it set for about 45 mins i have to do the same thing over again. I just change the spark plugs didnt help. Does anyone have any idea what could be my problem?
Top of pagePrevious messageNext messageBottom of page Link to this message

Dannypal
Visitor
Posted on Sunday, September 14, 2014 - 01:46 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Hi I just bought a half cab with an 85hp johnson v4 and wondering what year engine is on it, all the post I've read kind of state that its a 79 mod but looking at what the engine has seems newer for eg it has 4 carbys, individual coil packs, can anyone tell me more info, also the oil/fuel ratio it should be running
Codes 85ti79r A643967
Thanks
Top of pagePrevious messageNext messageBottom of page Link to this message

rboxcar
New member
Username: rboxcar

Post Number: 2
Registered: 03-2015
Posted on Thursday, March 26, 2015 - 07:03 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have a Evinrude Motor Model Number 18502S-E03403 Could anyone tell me the Year and Horsepower. Maybe what it would be worth to sell
Top of pagePrevious messageNext messageBottom of page Link to this message

ernie
Senior Member
Username: ernie

Post Number: 2030
Registered: 01-2002


Posted on Friday, March 27, 2015 - 07:20 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Mostly inboard engines here
Try aomci.org
Top of pagePrevious messageNext messageBottom of page Link to this message

Greg.wiggi
Visitor
Posted on Sunday, August 07, 2016 - 08:52 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I just bought a 1977 85hp outboard. I can not tell what model or make it is. It is either Evinrude or Johnson but not sure which. No I'd plate. Where would I find the serial number?

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Password:
E-mail:
Options: Automatically activate URLs in message
Action:

Administration Administration Log Out Log Out   Previous Page Previous Page Next Page Next Page

Home | Classifieds | History | Technical | Links | Store | About Us | Email
&copy 2005 OldMarineEngine.com, P.O. Box 188, Forest Dale, VT 05745-0188 • Phone: 802-247-4864 • All rights reserved.
   Marine Engine Seloc Repair Manual Lookup Tool

marine gas engine repair and restoration