Author |
Message |
![Top of page](https://www.oldmarineengine.com/discus/icons/mark_top.gif) ![Previous message](https://www.oldmarineengine.com/discus/icons/mark_up.gif) ![Next message](https://www.oldmarineengine.com/discus/icons/mark_down.gif) ![Link to this message](https://www.oldmarineengine.com/discus/icons/tree_m.gif)
redneckgunman
New member Username: redneckgunman
Post Number: 1 Registered: 07-2004
| Posted on Thursday, July 29, 2004 - 03:11 pm: |
|
Greetings. I am looking to get an estimated value for a marine engine I have. It is a WWII era Packard 4m-2500 v-12 that came from a PT Boat. It is roughly 2500 cubic inches of displacement. This engine produced between 1200 to 1500 BHP. The engine has a data plate on it from overhaul in 1959. Since then, it has less then 1 hour of operating time on it, and has been pickled. It has been sitting in my grandfather's barn since the 60's. I do not know how he got ahold of it, or where he got it. I hav done a lot of research on this engine, trying to find a value, with minimal sucess. I was led to this website, and hope to get some information. if anyone knows of a place where I can find the value, or if they happen to know the value, please let me know. I know an accuarate value is hard to determine, sight unseen, however, I am just looking for a ballpark figure, or range. Thank you all. |
![Top of page](https://www.oldmarineengine.com/discus/icons/mark_top.gif) ![Previous message](https://www.oldmarineengine.com/discus/icons/mark_up.gif) ![Next message](https://www.oldmarineengine.com/discus/icons/mark_down.gif) ![Link to this message](https://www.oldmarineengine.com/discus/icons/tree_m.gif)
donwhite
New member Username: donwhite
Post Number: 15 Registered: 11-2002
| Posted on Thursday, July 29, 2004 - 05:33 pm: |
|
Although this website is for models, it has several great pictures of the real thing. http://www.pt-boat.com/packard/packard.html See also http://www.acbs-bslol.com/Miscellaneous/PTPower.htm One more model website but good commentary on the utilization of the Packard V12 2500 engines. I have no idea of the value of such an engine. It strikes me since the unlimited class has gone to jets, it may not have much of a market. Good Luck! |
![Top of page](https://www.oldmarineengine.com/discus/icons/mark_top.gif) ![Previous message](https://www.oldmarineengine.com/discus/icons/mark_up.gif) ![Next message](https://www.oldmarineengine.com/discus/icons/mark_down.gif) ![Link to this message](https://www.oldmarineengine.com/discus/icons/tree_m.gif)
bruce
Senior Member Username: bruce
Post Number: 206 Registered: 07-2002
| Posted on Thursday, July 29, 2004 - 08:01 pm: |
|
Try calling the Antique Boat museum 315-686-4104 at Clayton NY. Ask if they would post a faxed poster by you to them at the upcoming 100th anniversary of the Gold Cup Regatta seeking offers. Try the discussion page on the vintagehydroplanes.com web site. Dave Thomas can give you info on the Higgins connection to a new WW2/PT museum in LA. higginsclassicboats.com John Freeman plays with vintage unlimiteds and would be a great source of current valuation/possible sale. [email protected] |
![Top of page](https://www.oldmarineengine.com/discus/icons/mark_top.gif) ![Previous message](https://www.oldmarineengine.com/discus/icons/mark_up.gif) ![Next message](https://www.oldmarineengine.com/discus/icons/mark_down.gif) ![Link to this message](https://www.oldmarineengine.com/discus/icons/tree_m.gif)
mart Visitor
| Posted on Sunday, August 08, 2004 - 12:45 am: |
|
About the vintage hydroplanes. The Packard V12's that the unlimited class racers used were *not* the Packard PT boat engines. The race boats used the Packard built, Roll Royce Merlin V1650 aircraft engine, which is a completely different engine and has nothing in common with the Packard PT boat engine, except that they both had 12 cylinders. About the value. It's probably worth something to a museum or some group restoring a WWII vintage PT boat, but it has little actual use value. Parts for this engine are rare and almost imposible to come by. In addition the 115/145 octane military grade aviation fuel that this engine requires (and in huge quantities!)is not produced anymore and is impossible to get. The engine is a rare and historical piece and should definately be preserved, but it's not something that could be used in any sort of modern day work or pleasure craft. |
![Top of page](https://www.oldmarineengine.com/discus/icons/mark_top.gif) ![Previous message](https://www.oldmarineengine.com/discus/icons/mark_up.gif) ![Next message](https://www.oldmarineengine.com/discus/icons/mark_down.gif) ![Link to this message](https://www.oldmarineengine.com/discus/icons/tree_m.gif)
richardday
Senior Member Username: richardday
Post Number: 284 Registered: 11-2003
![](https://www.oldmarineengine.com/discus/messages/thumbnails/3422.jpg)
| Posted on Sunday, August 08, 2004 - 08:27 am: |
|
Redneck, Is this the engine that was at the Tuckahoe engine show this last July? Very impressive hunk of iron. Ran like a clock but not much to see in the way of cams, push rods con rods and all the the moving parts of the old timers. It also had an impressive voice and we enjoyed seeing it run. I can only imagine what the engine room noise of a PT boat with three of those monsters flat out must have been like. |
![Top of page](https://www.oldmarineengine.com/discus/icons/mark_top.gif) ![Previous message](https://www.oldmarineengine.com/discus/icons/mark_up.gif) ![Next message](https://www.oldmarineengine.com/discus/icons/mark_down.gif) ![Link to this message](https://www.oldmarineengine.com/discus/icons/tree_m.gif)
steve krauklis
Visitor
| Posted on Tuesday, March 31, 2009 - 10:13 pm: |
|
i would be intrested in buying that engine off you if its for sale send me an email at [email protected] |
![Top of page](https://www.oldmarineengine.com/discus/icons/mark_top.gif) ![Previous message](https://www.oldmarineengine.com/discus/icons/mark_up.gif) ![Next message](https://www.oldmarineengine.com/discus/icons/mark_down.gif) ![Link to this message](https://www.oldmarineengine.com/discus/icons/tree_m.gif)
GMilan
Visitor
| Posted on Monday, November 16, 2009 - 10:27 pm: |
|
I have a aluminum cast cover (valve?) about 49 1/2 inches long 8 inches wide and about 6 inches high Ih has 12 bolt holes on each side 3 more across the width (front) and two more on each side in the rear where it widens out for the last 5 inches (of the 49 in length) It widens to 11 inches. It has the word "Packard" cast into the cover twice Once facing each direction. The top of the cover has a breather opening about 3 inches from the front the cover is also marked PL 752 and the breather cover marked A-71304 and separately 523 Any info would be greatly appreciated. thanks GM |
![Top of page](https://www.oldmarineengine.com/discus/icons/mark_top.gif) ![Previous message](https://www.oldmarineengine.com/discus/icons/mark_up.gif) ![Next message](https://www.oldmarineengine.com/discus/icons/mark_down.gif) ![Link to this message](https://www.oldmarineengine.com/discus/icons/tree_m.gif)
Frank Fletcher Visitor
| Posted on Monday, August 09, 2010 - 11:13 pm: |
|
I have a 4 hp Easthope engine in a 20 ft wooden boat and I've fixed the boat up reasonable well. The engines carburator was changed just before I bought it and it doesn't seam to do the job.I'm wondering if anybody has one they be willing to sell or if they could put me on to persons with more information. I very much appreciate any and all help. Frank Fletcher e-mail [email protected] |
![Top of page](https://www.oldmarineengine.com/discus/icons/mark_top.gif) ![Previous message](https://www.oldmarineengine.com/discus/icons/mark_up.gif) ![Next message](https://www.oldmarineengine.com/discus/icons/mark_down.gif) ![Link to this message](https://www.oldmarineengine.com/discus/icons/tree_m.gif)
Jack Maddocks
Visitor
| Posted on Monday, January 03, 2011 - 11:06 pm: |
|
I'm looking for a gentleman in western New York State who has a Packard PT Boat engine mounted on wheels. He takes it to boat shows where he fires it up to the delight of power boats. I saw him last in Gravenhurst Ontario. I lost his card but I would like to contract him in regard to restoring an engine we have. If anyone knows this person I would be grateful to learn his name and contact info. He may be in the North Tonawanda area. Can you help? Thanks, Jack}} |
![Top of page](https://www.oldmarineengine.com/discus/icons/mark_top.gif) ![Previous message](https://www.oldmarineengine.com/discus/icons/mark_up.gif) ![Next message](https://www.oldmarineengine.com/discus/icons/mark_down.gif) ![Link to this message](https://www.oldmarineengine.com/discus/icons/tree_m.gif)
miro
Senior Member Username: miro
Post Number: 541 Registered: 11-2001
![](https://www.oldmarineengine.com/discus/messages/thumbnails/11047.jpg)
| Posted on Wednesday, January 05, 2011 - 09:33 pm: |
|
I recall seeing that engine - and recall hearing it fie up. You might try sending a query to the ACBS Toronto Chapter. I will be doing booth duty at the upcoming Boat Show here in Toronto for the ACBS and I will ask around. Anyone who was there - will surely recall the engine. Miro |
![Top of page](https://www.oldmarineengine.com/discus/icons/mark_top.gif) ![Previous message](https://www.oldmarineengine.com/discus/icons/mark_up.gif) ![Next message](https://www.oldmarineengine.com/discus/icons/mark_down.gif) ![Link to this message](https://www.oldmarineengine.com/discus/icons/tree_m.gif)
drrot
Senior Member Username: drrot
Post Number: 70 Registered: 09-2008
![](https://www.oldmarineengine.com/discus/messages/thumbnails/133292.jpg)
| Posted on Friday, January 07, 2011 - 08:33 am: |
|
Most likely Warren Greatbatch from Island Street Boatyard in N Tonawanda, NY |
![Top of page](https://www.oldmarineengine.com/discus/icons/mark_top.gif) ![Previous message](https://www.oldmarineengine.com/discus/icons/mark_up.gif) ![Next message](https://www.oldmarineengine.com/discus/icons/mark_down.gif) ![Link to this message](https://www.oldmarineengine.com/discus/icons/tree_m.gif)
miro
Senior Member Username: miro
Post Number: 542 Registered: 11-2001
![](https://www.oldmarineengine.com/discus/messages/thumbnails/11047.jpg)
| Posted on Friday, January 07, 2011 - 03:51 pm: |
|
Yes, I called the boatyard and Warren is the guy with the engine. The phone number of the boatyard is 716-694-747. miro |
![Top of page](https://www.oldmarineengine.com/discus/icons/mark_top.gif) ![Previous message](https://www.oldmarineengine.com/discus/icons/mark_up.gif) ![Next message](https://www.oldmarineengine.com/discus/icons/mark_down.gif) ![Link to this message](https://www.oldmarineengine.com/discus/icons/tree_m.gif)
scott_n
Senior Member Username: scott_n
Post Number: 191 Registered: 02-2008
| Posted on Tuesday, May 03, 2011 - 08:10 am: |
|
Mystic Seaport just acquired two Packard PT boats engine one we would lite to get running the other I can tread for parts we need a manual a carburetor and raw water pump.
As you can sea the parts engine had a bad day any help would be greatly appreciated ![](https://www.oldmarineengine.com/discus/messages/2/251240.jpg) |
![Top of page](https://www.oldmarineengine.com/discus/icons/mark_top.gif) ![Previous message](https://www.oldmarineengine.com/discus/icons/mark_up.gif) ![Next message](https://www.oldmarineengine.com/discus/icons/mark_down.gif) ![Link to this message](https://www.oldmarineengine.com/discus/icons/tree_m.gif)
scott_n
Senior Member Username: scott_n
Post Number: 192 Registered: 02-2008
| Posted on Tuesday, May 03, 2011 - 08:10 am: |
|
Mystic Seaport just acquired two Packard PT boats engine one we would lite to get running the other I can tread for parts we need a manual a carburetor and raw water pump.
As you can sea the parts engine had a bad day any help would be greatly appreciated ![](https://www.oldmarineengine.com/discus/messages/2/251247.jpg) |
![Top of page](https://www.oldmarineengine.com/discus/icons/mark_top.gif) ![Previous message](https://www.oldmarineengine.com/discus/icons/mark_up.gif) ![Next message](https://www.oldmarineengine.com/discus/icons/mark_down.gif) ![Link to this message](https://www.oldmarineengine.com/discus/icons/tree_m.gif)
RON OJEDA Visitor
| Posted on Friday, October 07, 2011 - 05:30 pm: |
|
iI HAVE CARB FOR YOUR PT. ENGINE. ITS A HOLLEY 1685F. IT IS IN VERY GOOD TO EXCELLENT CONDITION. CALL ME AT (845) 358-3679. LEAVE MESSAGE. ASK FOR RON. |
![Top of page](https://www.oldmarineengine.com/discus/icons/mark_top.gif) ![Previous message](https://www.oldmarineengine.com/discus/icons/mark_up.gif) ![Next message](https://www.oldmarineengine.com/discus/icons/mark_down.gif) ![Link to this message](https://www.oldmarineengine.com/discus/icons/tree_m.gif)
packardclipper
New member Username: packardclipper
Post Number: 1 Registered: 11-2011
| Posted on Saturday, November 05, 2011 - 02:18 am: |
|
I've got two intact engines that will be put in a PT or ASR Hull. One was at Firestone testing the world land speed record tires in the 1960s. The other is a factory new unit. Also have ALL the literature. What do you need copies of? I'm very interested in wreck for spares. I have many spares for possible trade. email me. |
![Top of page](https://www.oldmarineengine.com/discus/icons/mark_top.gif) ![Previous message](https://www.oldmarineengine.com/discus/icons/mark_up.gif) ![Next message](https://www.oldmarineengine.com/discus/icons/mark_down.gif) ![Link to this message](https://www.oldmarineengine.com/discus/icons/tree_m.gif)
Paul Hewitt
Visitor
| Posted on Tuesday, January 10, 2012 - 06:03 pm: |
|
Hey guy,s looking for parts for 4m 2500 , rods 2 pair ,with bearing casings......Paul Hewitt, Hewitt Machine 613 342 3783 |
![Top of page](https://www.oldmarineengine.com/discus/icons/mark_top.gif) ![Previous message](https://www.oldmarineengine.com/discus/icons/mark_up.gif) ![Next message](https://www.oldmarineengine.com/discus/icons/mark_down.gif) ![Link to this message](https://www.oldmarineengine.com/discus/icons/tree_m.gif)
jfsackett
New member Username: jfsackett
Post Number: 1 Registered: 02-2012
| Posted on Tuesday, February 21, 2012 - 05:08 pm: |
|
I have some parts for the Packard 4M-2500 marine engine that I would like to sell. Main bearing shells, appx 30 sets in original packaging. Wrist pins (I think), 18 in original cosmoline. Water pumps, 6, pretty sure they are new. Pesco fuel pumps, 4 in original packaging, appx 12 that would be good for cores. I would be happy to send pic's if anyone is interested. Jim 239-218-0945 |
![Top of page](https://www.oldmarineengine.com/discus/icons/mark_top.gif) ![Previous message](https://www.oldmarineengine.com/discus/icons/mark_up.gif) ![Next message](https://www.oldmarineengine.com/discus/icons/mark_down.gif) ![Link to this message](https://www.oldmarineengine.com/discus/icons/tree_m.gif)
packardclipper
New member Username: packardclipper
Post Number: 2 Registered: 11-2011
| Posted on Tuesday, February 21, 2012 - 10:33 pm: |
|
jfsackett: Yes, I am interested in parts for my engines. I will call you on the 22nd. What time is best?? Steve |
![Top of page](https://www.oldmarineengine.com/discus/icons/mark_top.gif) ![Previous message](https://www.oldmarineengine.com/discus/icons/mark_up.gif) ![Next message](https://www.oldmarineengine.com/discus/icons/mark_down.gif) ![Link to this message](https://www.oldmarineengine.com/discus/icons/tree_m.gif)
pt658
New member Username: pt658
Post Number: 1 Registered: 04-2012
| Posted on Thursday, April 05, 2012 - 05:16 pm: |
|
Hi folks, I'm getting involved with restoration of a spare 5m2500 packard for pt658 here in portland OR,the only operational Pt boat in the country, we think anyway. This will be a complete return to service rebuild. We need manuals with service limit data, assembly and torque data and have a modest amount of money for copys. JIMMY at 503-989-9736 or email at [email protected] |
![Top of page](https://www.oldmarineengine.com/discus/icons/mark_top.gif) ![Previous message](https://www.oldmarineengine.com/discus/icons/mark_up.gif) ![Next message](https://www.oldmarineengine.com/discus/icons/mark_down.gif) ![Link to this message](https://www.oldmarineengine.com/discus/icons/tree_m.gif)
ocgirl
New member Username: ocgirl
Post Number: 1 Registered: 06-2012
| Posted on Thursday, June 21, 2012 - 11:31 am: |
|
Hi, I have a new, or reconditioned, Packard PT boat marine engine for sale that belonged to my Father. Model 4M 2500, complete with exception of the tachometer drive. If interested, please contact me via this site, or I can be reached by email at [email protected]. Pictures available. Thanks, Dinah Warfield |
![Top of page](https://www.oldmarineengine.com/discus/icons/mark_top.gif) ![Previous message](https://www.oldmarineengine.com/discus/icons/mark_up.gif) ![Next message](https://www.oldmarineengine.com/discus/icons/mark_down.gif) ![Link to this message](https://www.oldmarineengine.com/discus/icons/tree_m.gif)
ocgirl
New member Username: ocgirl
Post Number: 2 Registered: 06-2012
| Posted on Thursday, June 21, 2012 - 07:44 pm: |
|
Also wanted to amend my original post to add the following information,..., engine is a 'crate' engine, never been run, and has been museum kept since 1998. Thank you for your interest. Dinah Warfield [email protected] |
![Top of page](https://www.oldmarineengine.com/discus/icons/mark_top.gif) ![Previous message](https://www.oldmarineengine.com/discus/icons/mark_up.gif) ![Next message](https://www.oldmarineengine.com/discus/icons/mark_down.gif) ![Link to this message](https://www.oldmarineengine.com/discus/icons/tree_m.gif)
ocgirl
New member Username: ocgirl
Post Number: 3 Registered: 06-2012
| Posted on Monday, July 16, 2012 - 08:57 am: |
|
Updated - July 16, 2012 Engine was checked by marine mechanic this morning, and it 'turns freely'. Can upload video later this evening if interested. Thanks, Dinah Warfield [email protected] |
![Top of page](https://www.oldmarineengine.com/discus/icons/mark_top.gif) ![Previous message](https://www.oldmarineengine.com/discus/icons/mark_up.gif) ![Next message](https://www.oldmarineengine.com/discus/icons/mark_down.gif) ![Link to this message](https://www.oldmarineengine.com/discus/icons/tree_m.gif)
scott_n
Senior Member Username: scott_n
Post Number: 217 Registered: 02-2008
| Posted on Friday, August 31, 2012 - 10:00 am: |
|
We got our 4M 2500 running in time for this years Engine Expo A great time was had by all htt://www.youtube.com/watch?v=AW3rFfF565c![](https://www.oldmarineengine.com/discus/messages/2/257333.jpg) |
![Top of page](https://www.oldmarineengine.com/discus/icons/mark_top.gif) ![Previous message](https://www.oldmarineengine.com/discus/icons/mark_up.gif) ![Next message](https://www.oldmarineengine.com/discus/icons/mark_down.gif) ![Link to this message](https://www.oldmarineengine.com/discus/icons/tree_m.gif)
Paul hewitt
Visitor
| Posted on Wednesday, October 10, 2012 - 09:13 pm: |
|
Hi gang, this is a last ditch effort to try to find any information regarding gauge tools,or the dimensions they represent ,of the late model trans for the 4m 2500. Engine done, about to assemble trans to finish. Any hints,people,or info would be very helpful 613 342 3783 Thanks |
![Top of page](https://www.oldmarineengine.com/discus/icons/mark_top.gif) ![Previous message](https://www.oldmarineengine.com/discus/icons/mark_up.gif) ![Next message](https://www.oldmarineengine.com/discus/icons/mark_down.gif) ![Link to this message](https://www.oldmarineengine.com/discus/icons/tree_m.gif)
Danny Lukashal
Visitor
| Posted on Thursday, July 18, 2013 - 05:13 pm: |
|
Hey Guys. I have recently been standing next to a perfect complete 4m 2500 .The owner would like to see it in a museum setting. He may be willing to donate it? Any takers or interest. Please reply. THXS. |
![Top of page](https://www.oldmarineengine.com/discus/icons/mark_top.gif) ![Previous message](https://www.oldmarineengine.com/discus/icons/mark_up.gif) ![Next message](https://www.oldmarineengine.com/discus/icons/mark_down.gif) ![Link to this message](https://www.oldmarineengine.com/discus/icons/tree_m.gif)
ldobbins
Senior Member Username: ldobbins
Post Number: 120 Registered: 12-2002
| Posted on Friday, July 19, 2013 - 12:54 am: |
|
The PT-658 group in Portland, OR is always looking for spare engines to run their boat. They are a museum / non profit. What part of the country or world is this engine in? Cheers, Lew |
![Top of page](https://www.oldmarineengine.com/discus/icons/mark_top.gif) ![Previous message](https://www.oldmarineengine.com/discus/icons/mark_up.gif) ![Next message](https://www.oldmarineengine.com/discus/icons/mark_down.gif) ![Link to this message](https://www.oldmarineengine.com/discus/icons/tree_m.gif)
jfsackett
New member Username: jfsackett
Post Number: 2 Registered: 02-2012
| Posted on Friday, July 19, 2013 - 01:43 pm: |
|
You may also want to contact Randy Smith at the National WW2 Museum in New Orleans. They are in the process of doing an excellent restoration on PT-305. |
![Top of page](https://www.oldmarineengine.com/discus/icons/mark_top.gif) ![Previous message](https://www.oldmarineengine.com/discus/icons/mark_up.gif) ![Next message](https://www.oldmarineengine.com/discus/icons/mark_down.gif) ![Link to this message](https://www.oldmarineengine.com/discus/icons/tree_m.gif)
Danny Lukashal
Visitor
| Posted on Saturday, July 20, 2013 - 09:20 am: |
|
This engine is in Ontario, Canada. I will leave my email for personal contact [email protected] THXS. |
![Top of page](https://www.oldmarineengine.com/discus/icons/mark_top.gif) ![Previous message](https://www.oldmarineengine.com/discus/icons/mark_up.gif) ![Next message](https://www.oldmarineengine.com/discus/icons/mark_down.gif) ![Link to this message](https://www.oldmarineengine.com/discus/icons/tree_m.gif)
easternshore
New member Username: easternshore
Post Number: 1 Registered: 04-2014
| Posted on Sunday, April 13, 2014 - 07:25 am: |
|
Anyone looking for a Packard 4m 2500 in great condition. Make Offer. |
![Top of page](https://www.oldmarineengine.com/discus/icons/mark_top.gif) ![Previous message](https://www.oldmarineengine.com/discus/icons/mark_up.gif) ![Next message](https://www.oldmarineengine.com/discus/icons/mark_down.gif) ![Link to this message](https://www.oldmarineengine.com/discus/icons/tree_m.gif)
ldobbins
Senior Member Username: ldobbins
Post Number: 142 Registered: 12-2002
| Posted on Sunday, April 13, 2014 - 10:13 am: |
|
Where is it located? Any pics? |
![Top of page](https://www.oldmarineengine.com/discus/icons/mark_top.gif) ![Previous message](https://www.oldmarineengine.com/discus/icons/mark_up.gif) ![Next message](https://www.oldmarineengine.com/discus/icons/mark_down.gif) ![Link to this message](https://www.oldmarineengine.com/discus/icons/tree_m.gif)
oozzie
New member Username: oozzie
Post Number: 1 Registered: 11-2015
| Posted on Wednesday, November 04, 2015 - 10:52 am: |
|
have a 4m 2500 nos for sale 559-960-0275 |
![Top of page](https://www.oldmarineengine.com/discus/icons/mark_top.gif) ![Previous message](https://www.oldmarineengine.com/discus/icons/mark_up.gif) ![Next message](https://www.oldmarineengine.com/discus/icons/mark_down.gif) ![Link to this message](https://www.oldmarineengine.com/discus/icons/tree_m.gif)
summerscape
Member Username: summerscape
Post Number: 6 Registered: 04-2015
| Posted on Wednesday, November 04, 2015 - 12:02 pm: |
|
A Complete engine or just parts? |
![Top of page](https://www.oldmarineengine.com/discus/icons/mark_top.gif) ![Previous message](https://www.oldmarineengine.com/discus/icons/mark_up.gif) ![Next message](https://www.oldmarineengine.com/discus/icons/mark_down.gif) ![Link to this message](https://www.oldmarineengine.com/discus/icons/tree_m.gif)
oozzie
New member Username: oozzie
Post Number: 2 Registered: 11-2015
| Posted on Wednesday, November 04, 2015 - 08:53 pm: |
|
a complete new old stock with transmission turns free military preserved stored in climate control. |
![Top of page](https://www.oldmarineengine.com/discus/icons/mark_top.gif) ![Previous message](https://www.oldmarineengine.com/discus/icons/mark_up.gif) ![Next message](https://www.oldmarineengine.com/discus/icons/mark_down.gif) ![Link to this message](https://www.oldmarineengine.com/discus/icons/tree_m.gif)
solarrog
Senior Member Username: solarrog
Post Number: 606 Registered: 03-2002
![](https://www.oldmarineengine.com/discus/messages/thumbnails/1014.jpg)
| Posted on Wednesday, November 04, 2015 - 09:02 pm: |
|
where are you located Ozzie. I sure would lie to see it? Price is partly controlled by location. |
![Top of page](https://www.oldmarineengine.com/discus/icons/mark_top.gif) ![Previous message](https://www.oldmarineengine.com/discus/icons/mark_up.gif) ![Next message](https://www.oldmarineengine.com/discus/icons/mark_down.gif) ![Link to this message](https://www.oldmarineengine.com/discus/icons/tree_m.gif)
solarrog
Senior Member Username: solarrog
Post Number: 607 Registered: 03-2002
![](https://www.oldmarineengine.com/discus/messages/thumbnails/1014.jpg)
| Posted on Wednesday, November 04, 2015 - 09:05 pm: |
|
"K doesn't always work |
![Top of page](https://www.oldmarineengine.com/discus/icons/mark_top.gif) ![Previous message](https://www.oldmarineengine.com/discus/icons/mark_up.gif) ![Next message](https://www.oldmarineengine.com/discus/icons/mark_down.gif) ![Link to this message](https://www.oldmarineengine.com/discus/icons/tree_m.gif)
oozzie
New member Username: oozzie
Post Number: 3 Registered: 11-2015
| Posted on Thursday, November 05, 2015 - 08:21 am: |
|
it is in kerman ca |
![Top of page](https://www.oldmarineengine.com/discus/icons/mark_top.gif) ![Previous message](https://www.oldmarineengine.com/discus/icons/mark_up.gif) ![Next message](https://www.oldmarineengine.com/discus/icons/mark_down.gif) ![Link to this message](https://www.oldmarineengine.com/discus/icons/tree_m.gif)
oozzie
Member Username: oozzie
Post Number: 4 Registered: 11-2015
| Posted on Thursday, November 05, 2015 - 08:27 am: |
|
![4m 2500](https://www.oldmarineengine.com/discus/messages/2/270394.jpg) |
![Top of page](https://www.oldmarineengine.com/discus/icons/mark_top.gif) ![Previous message](https://www.oldmarineengine.com/discus/icons/mark_up.gif) ![Next message](https://www.oldmarineengine.com/discus/icons/mark_down.gif) ![Link to this message](https://www.oldmarineengine.com/discus/icons/tree_m.gif)
oozzie
Member Username: oozzie
Post Number: 5 Registered: 11-2015
| Posted on Thursday, November 05, 2015 - 09:14 am: |
|
![v12](https://www.oldmarineengine.com/discus/messages/2/270398.jpg) ![v12](https://www.oldmarineengine.com/discus/messages/2/270399.jpg) |
![Top of page](https://www.oldmarineengine.com/discus/icons/mark_top.gif) ![Previous message](https://www.oldmarineengine.com/discus/icons/mark_up.gif) ![Next message](https://www.oldmarineengine.com/discus/icons/mark_down.gif) ![Link to this message](https://www.oldmarineengine.com/discus/icons/tree_m.gif)
Alex Wardle
Visitor
| Posted on Tuesday, May 24, 2016 - 01:59 pm: |
|
Im currently looking to purchase a Packard 4M-2500 v12 engine, please email me for any information. [email protected] |