Post Number: 2
|Posted on Thursday, March 22, 2012 - 04:43 pm: ||
Thank to all for your feedback.I measured the cylinder bore of the MD 1b and got readings of 3.5005 and 3.5015". Can anyone tell me if these measurements are within rebuildable tolerance.I do not have a shop manual for the MD 1b.Thank you.I am in Tacoma,WA.
Post Number: 115
|Posted on Thursday, March 22, 2012 - 08:15 pm: ||
Seems like both cylinders are very close to spec. I wouldn't do anymore than than a light hone to break any glaze.