| Author |
Message |
    
searcher
New member
Username: searcher
Post Number: 2
Registered: 10-2004
| | Posted on Thursday, December 23, 2004 - 09:02 pm: | 
|
I picked up a side draft brass/bronze Tillotson carburetor Model MS, No. 1A. The opening at the throttle body is 1 3/16" dia. Was this carburetor used in marine applications? |
jack_c
New member
Username: jack_c
Post Number: 1
Registered: 11-2004
| | Posted on Saturday, December 25, 2004 - 09:31 am: |
|
Searcher,
The MS 1A was used on the 1933 Utilimotor.
Jack |
searcher
New member
Username: searcher
Post Number: 3
Registered: 10-2004
| | Posted on Sunday, December 26, 2004 - 05:19 pm: |
|
Jack,
Thanks for responding. I hoped the Tillotson was off a marine engine of some type since it was mostly brass/bronze but I am pleased to know the application regardless.
Thanks again. Hugh |
searcher
Member
Username: searcher
Post Number: 6
Registered: 10-2004
| | Posted on Saturday, January 01, 2005 - 03:34 pm: |
|
Jack,
I looked up the Utilimotor on the old gas engine site. This carburetor did not seem to be a 'fit' for the Utilimotor in size or configuration. So, I took another look at the model number, this time with a strong light and a hand lens. The carburetor is actually a MS 4A. Only a part of the 4 is clear and it looks like a 1 until subjected to careful scrutiny.
During the research I came across the Tillotson original equipment list. This carburetor apparently came off an Evinrude Motors Corp. R Sportwin, 1927-1928. That makes sense to me as this has the venturi shape similar to the old Schebler and the size is consistent with a bigger engine.
So, I think that mystery is solved. I might not have persued this any further had you not responded to my original inquiry. Thanks.
Hugh |
Nicholas Larouche
Visitor
| | Posted on Friday, March 11, 2005 - 10:03 am: |
|
Hi,
I have in my possesion a very old elgin outboard fed by a tillotson carburetor. The model number is MD49A. I need the gasket kit and the gas filter for this carburetor. Did someone can help me to find informations please.
Thank you |
bruce
Senior Member
Username: bruce
Post Number: 260
Registered: 07-2002
| | Posted on Friday, March 11, 2005 - 10:39 pm: |
|
Try Tredwell Carburetor (Tredwell NY)in your search engine. They have an extensive Tilitson inventory. |
John Pedersen
Visitor
| | Posted on Saturday, March 26, 2005 - 10:19 am: |
|
Looking for a Tillotson MD 122A. Also anyone have a list of the small engine tillotson carbs and their application from 1941 and newer. Email direct appreciated. Thanks. |
John Rolli
Visitor
| | Posted on Saturday, May 14, 2005 - 11:08 pm: |
|
Hi all, im looking for a Tillotson MS5A carb in any condition or parts. Thanks. John. |
Mike Garrison
Visitor
| | Posted on Wednesday, July 06, 2005 - 08:31 pm: |
|
I have an old SeaKing 9.6 outboard. The model #WB27009A Serial #23317. It has a Tillotson carb #343061 on one side and C03A on the other. I need a float for the carb. I have rebuilt the carb but can not find a float. Any help will be welcomed |
kevinross
New member
Username: kevinross
Post Number: 1
Registered: 08-2005
| | Posted on Sunday, August 28, 2005 - 11:36 am: |
|
I have an old Elgin 12 hp two stroke twin cyl outboard motor with a Tillotson MD89C carb. Can anyone help me with the needle valve adjustments? I just bought this engine not running but it just had a bad coil and someone has misadjusted the needles.
Thanks for any info that you can pass along. Kevin |
Robert w boggess
New member
Username: chrysler_101
Post Number: 3
Registered: 12-2005
| | Posted on Thursday, December 29, 2005 - 09:55 am: |
|
i have a tillotson md145a for a outbord any one help with kits |
tom armour
Visitor
| | Posted on Tuesday, April 04, 2006 - 07:37 am: |
|
Hi All, I am looking for parts or kits for a tillitson MD59A. off a 2.5HP Elgin outboard. Or sugestions on fixing a decaying float. |
PbLefty
Visitor
| | Posted on Thursday, November 02, 2006 - 04:36 pm: |
|
Looking for a rebuild kit for Tillotson carb MD120C on a BearCat 55hp outboard. Any info appreciated. Thanks |
HershelGoodson
Visitor
| | Posted on Saturday, October 13, 2007 - 09:51 pm: |
|
I am looking for a carb kit (gasket kit) for a tillotson MD34B carb for a 7.5 hp evenrude |
La Ray Collector
Visitor
| | Posted on Tuesday, October 16, 2007 - 09:06 pm: |
|
Hi all, i just found an old tillotson carb in my garage and was wondering what it was off of? The part number is HD14A. Maybe a two stroke of some sort? Any help appreciated. |
pati jordan
Visitor
| | Posted on Wednesday, June 25, 2008 - 06:20 pm: |
|
i purchased an older sportcraft boat, vintage 1968. outdrive original mercruiser, inboard renault. so far it is coming along except need carb parts. the carb is a tillotson. all i ned to get her running, any help would be great thanks |
Bruce Hall
Senior Member
Username: bruce
Post Number: 176
Registered: 07-2002
| | Posted on Wednesday, June 25, 2008 - 11:24 pm: |
|
Pati. Google Treadwell Carburetor. You will find an address and phone number. They specialise in Tillotson carburetors. |
pati jordan
Visitor
| | Posted on Thursday, July 10, 2008 - 11:59 pm: |
|
thank u bruce. i have the carb with a mechanic now, it has been soaking. missing some pieces (thats how the boat came) didnt relize finding parts would be so difficult. i spoke to him this evening, he is very busy so i am online checking. he told me to look for mercury carb kit #139-2591 or complete 1342-2564 or 1342-2565} |
smith lake 440
Visitor
| | Posted on Tuesday, August 05, 2008 - 06:18 pm: |
|
how do you remove the fly wheel on a 1951 elgin 6hp.,to clean and adjust points ? |
