|Clae gearbox torque problem
Post Number: 1
|Posted on Sunday, January 16, 2011 - 09:07 pm: ||
Reverse no torque, how can i adjust?
Post Number: 199
|Posted on Sunday, January 16, 2011 - 09:51 pm: ||
No Torque,or slipping?
If it is slipping you can adjust the reverse band
by loosening the lock nut on the out side of the box
(port side ,halfway along box)and then tighten
the inner nut until you achieve the desired results.
Re-tighten lock nut.DONT OVER ADJUST,as this can add
drag causing heat and wear when in fwd gear.
No torque could be an over adjustment of the fwd
adjustment,creating drag when in reverse
Post Number: 2
|Posted on Monday, January 17, 2011 - 06:10 pm: ||
Thanks Todd, i'll give it a try today