how to find evinrude year for motor

Author Message   Lee Posted on Sunday, May 11, 2003 - 12:09 am:        I would like to know how I can find a year for a motor with the serial and model numbers? where do I go? have checked but getting frustrated!?   Roger DiRuscio Posted on Sunday, May 11, 2003 - 12:25 am:        why dont you post a discription of your motor and the numbers you have, I cant help you with the information you have provided so far Roger   andrew Posted on Sunday, May 11, 2003 - 05:25 pm:        Lee, Check the nameplate on your motor and then go to the following page on the MarineEngine.com site: Evinrude This web site, OldMarineEngine.com is for pre-1940 style inboard engines.   JoeGrzy Jr Posted on Wednesday, June 18, 2003 - 12:25 pm:        when did evenrude stop makiing the elto? the one i have has a plate # 4266 12105 09332 looking for year of motor?   Bruce Posted on Wednesday, June 18, 2003 - 09:14 pm:        Joe, try calling Chris Scratch who lists as a general Evenrude reference in the AOMC directory.519-839-5188.   Joe Mills Posted on Monday, June 21, 2004 - 11:59 am:        I have a Evinrude 2. The plate identifies the model as E2RCOC, and I cannot identify the year from it. Can anyone help?   andrew Posted on Monday, June 21, 2004 - 08:01 pm:        That is a 2HP Rope start Evinrude 1985, the "CO" is 1985 model year. If you need a manual for it I suggest the Seloc Manual. The factory service manual for 1985 covers all the models that year, and would be overkill if all you need is info on a 2HP motor.   chip mason Visitor Posted on Monday, July 26, 2004 - 07:54 pm:        I have an evinrude elto. Tag number 4266 11061 Any info would be helpful Thanks .....   andrew Moderator Username: andrew Post Number: 833 Registered: 11-2001 Posted on Tuesday, July 27, 2004 - 09:14 am:        Chip, Your model number is 4266. The serial number is 11061. That is a 1.1HP Evinrude from 1938-41. We can supply some manuals for at the MarineEngine.com site, and you might be interested in Peter Hunn's OLD OUTBOARD BOOK   garyvanarsdale Visitor Posted on Friday, August 13, 2004 - 08:07 pm:        Can anyone help locate an Evinrude Elto Ace 1.1 hp? Our family would like to purchase one to continue sort of a tradition? Thank you very much.   andrew Moderator Username: andrew Post Number: 850 Registered: 11-2001 Posted on Friday, August 13, 2004 - 09:13 pm:        Gary, You should post a wanted ad in the classifieds section of our affiliated site, MarineEngine.com   chris holden Visitor Posted on Monday, August 16, 2004 - 09:40 pm:        ihave a elto the numbers are 5d10e 17658 could you tell me what year this and if there is a manual available thanks   cash smith Visitor Posted on Saturday, August 21, 2004 - 01:39 pm:        What year evinrude outboard do I have? Serial number is 15014-14618. No model #. On the front of the engine it says fastwin 15. On the side it says evinrude aquasonic. Thanks Cash   andrew Moderator Username: andrew Post Number: 858 Registered: 11-2001 Posted on Saturday, August 21, 2004 - 02:10 pm:        Cash, 15014 is the model number. It is a 1955 15HP. See this link.   Clayton Dobson Visitor Posted on Sunday, September 12, 2004 - 04:13 pm:        TPWD insist I tell them the year of manufacture of Evinrude 4.5 HP, ID E0001069, Model E5RLCIC Can you please help me?   andrew Moderator Username: andrew Post Number: 897 Registered: 11-2001 Posted on Sunday, September 12, 2004 - 04:59 pm:        1981 model year. The "CI" in the model number is "1981 model year".   J�rgen Wildner Visitor Posted on Tuesday, September 28, 2004 - 09:11 am:        Could you find out the model year of my engine. It�s a 90 hp Evinrude Ficht Ram Injection. The label with number E90.... is missing. What I have is the enigine number which is 4980154. Can you please help me?   andrew Moderator Username: andrew Post Number: 914 Registered: 11-2001 Posted on Tuesday, September 28, 2004 - 04:33 pm:        Jorgen, You need the model number to detirmine the year. That "engine number" you provided won't help.   thehobman New member Username: thehobman Post Number: 1 Registered: 09-2004 Posted on Wednesday, September 29, 2004 - 04:50 pm:        hi can you tell me what year this 25 hp motor is Serial #E0671421 Model# E25CUR   andrew Moderator Username: andrew Post Number: 916 Registered: 11-2001 Posted on Wednesday, September 29, 2004 - 05:31 pm:        That is a 1987 model year motor. The "CU" is "1987 model year".   Sheila P. Visitor Posted on Tuesday, October 19, 2004 - 11:01 pm:        Hi, We have a 100hp Evinrude ID: C7070639 Model: E100 MLCSC Can you tell me the year of it please? Thank You   andrew Moderator Username: andrew Post Number: 944 Registered: 11-2001 Posted on Wednesday, October 20, 2004 - 09:39 am:        That is a 1980. The "CS" in the model number is "1980 model year". The "M" is "manual tilt - electric start" The "L" is 20" shaft length.   mike243123 New member Username: mike243123 Post Number: 1 Registered: 10-2004 Posted on Thursday, October 21, 2004 - 10:55 pm:        Need to find out what year evenrude I have. It is a 15 h.p. with the model #E1SRLCNC Any help would be appreciated. Thanks, Mike   andrew Moderator Username: andrew Post Number: 945 Registered: 11-2001 Posted on Friday, October 22, 2004 - 09:17 am:        That model is E15RLCNC not E1SRLCNC Evinrude 15HP Rope start 20" shaft length 1982 model year.   joey Visitor Posted on Friday, November 05, 2004 - 08:44 pm:        I have a model # E35RCSM serial # E0004328. I am having trouble with a year and if an electric start could be installed also any other information would be very helpful and appreciated???   joey Visitor Posted on Friday, November 05, 2004 - 09:16 pm:        hi also it is a tilt arm can i convert to rideguide steering? i do want a decent amount of comfort and convenience without a lot of hidden cost for "extra parts". the motor looks real nice and runs pretty good. its on an alumacraft 15' superhawk.   andrew Moderator Username: andrew Post Number: 961 Registered: 11-2001 Posted on Saturday, November 06, 2004 - 06:14 pm:        Joey, Model number E35RCSM is a 35HP Evinrude Rope Start, 1980 model year. I don't know about adding electric start or "rideguide steering". I suggest that you post those questions in the outboard category of the discussion board at MarineEngine.com, it is a companion site of this one but is focused on more "current" engines. The OldMarineEngine.com site is focused on "early style" marine inboard engines.   Senor Dave Visitor Posted on Tuesday, January 25, 2005 - 07:01 pm:        I have an evinrude super 4 model e100wtp14 and sn j0480219 Can anyone help me with the year and where to find parts.   Brian Riggan Visitor Posted on Tuesday, February 22, 2005 - 07:39 pm:        what are the specs (year, horsepower) on an Evinrude with the serial # : EO4133 and the model # : 9422S?   andrew Moderator Username: andrew Post Number: 1060 Registered: 11-2001 Posted on Tuesday, February 22, 2005 - 07:53 pm:        Brian, This website is really for "inboards" not "outboards", but that model number 9422S is a 9.5HP from 1964. See this link.   andrew Moderator Username: andrew Post Number: 1061 Registered: 11-2001 Posted on Tuesday, February 22, 2005 - 07:57 pm:        senor dave, Your question above... I think you have the model number wrong. That is a 100HP commerial model, but the last two digits probably aren't "14". If it is 100WTPLG it would be 1993.   shawn Visitor Posted on Saturday, June 18, 2005 - 07:57 am:        i just bought an evinrude 30hp mod.no.ce30elcoa could anyone tell me the year? thanks ss   andrew Moderator Username: andrew Post Number: 1157 Registered: 11-2001 Posted on Saturday, June 18, 2005 - 11:06 am:        That is a 1985 model year. The "co" is "1985 model year". You can ask outboard questions on the discussion board at MarineEngine.com .   ricky Visitor Posted on Saturday, July 09, 2005 - 12:00 am:        not sure what the motor is but numbers are model 5567E serial A306983 i think evinrude hope some can help thanks   andrew Moderator Username: andrew Post Number: 1169 Registered: 11-2001 Posted on Saturday, July 09, 2005 - 09:00 am:        Ricky, Could it be 55673 instead of 5567E ? 55673 is Evinrude 55HP, 1976. See this link.   Shaun M Visitor Posted on Sunday, July 10, 2005 - 10:23 pm:        Hello! I am curious as to what year my evinrude outboard is, and what would be the recommended manual. I can not find anything on the web about this, so you're my last hope here. The Model Number is listed as E30ELCED. Thanks for any help you can give!   Michael Visitor Posted on Saturday, July 16, 2005 - 11:33 pm:        Hello all! I'm looking for my boat motor year as well. The numbers on the plate is a little worn, but here is what I've got. Model - E10ECCD. Serial - ??714690. Any help is GREATLY appreciated. Thanks!   andrew Moderator Username: andrew Post Number: 1174 Registered: 11-2001 Posted on Sunday, July 17, 2005 - 09:24 am:        Michael, That is a 9.9HP, 1988. The "CC" is "1988 model year". You can use the board at MarineEngine.com for other outboard related questions. Regards, Andrew   andrew Moderator Username: andrew Post Number: 1175 Registered: 11-2001 Posted on Sunday, July 17, 2005 - 09:26 am:        Shaun, I missed your previous question above. E30ELCED is a 30HP Electric Start, 1989 model year. Regards, Andrew   CHARLIE MILLER Visitor Posted on Saturday, September 10, 2005 - 04:35 pm:        HI, I AM TRYING TO DETERMINE THE YEAR OF MANUFACTURE OF AN EVINRUDE BIG TWIN AQUASONIC 25 HP WHISPERING POWER OUTBOARD. MODEL AND SERIAL NUMBERS APPEAR TO BE 75920-06597 . THANKS FOR YOUR ASSISTANCE AND GREAT RESOURCE.   andrew Moderator Username: andrew Post Number: 1196 Registered: 11-2001 Posted on Saturday, September 10, 2005 - 05:10 pm:        Charlie, Are you sure about that model number "75920"...? Could it be "25920"? If so it would be 25HP, 1955. This site is really for old "inboards", not "outboards". You could try the board at our other site, MarineEngine.com for other outboard questions and manuals for outboard motors.   larry lisitza Visitor Posted on Friday, October 07, 2005 - 08:52 pm:        i have a12hp elto model 12012Ldoes anyone know whatyear it is and were i can get parts   Johno Visitor Posted on Sunday, October 23, 2005 - 08:52 am:        Hi there - my evinrude has the model no E5RLCIC. Can ayone tell me the year and whether it indicates long or standed shaft. I have always assumed it was long shafted as that it was how it was sold to me. Measures 44" from tip of skeg to top of cowl. Ta   andrew Moderator Username: andrew Post Number: 1227 Registered: 11-2001 Posted on Sunday, October 23, 2005 - 09:41 am:        R = Rope Start L = Long Shaft CI = 1981 C = Model run during that year, not critical. If you need manuals see this link.   Gforce421 Visitor Posted on Thursday, January 26, 2006 - 03:09 am:        Hi all need some help please... I have a 40 HP twin Evinrude, dark blue motor covers and i cant find a engine nameplate on it. The only numbers I can find are on a raised casting about 1 inch in size which are * 30475 ... and another number on a plug (looks like a welsh plug) on the top of the motor which is G3606376 any help would be good thanks, I was told it might be a late 70's unit   dhwright New member Username: dhwright Post Number: 1 Registered: 01-2006 Posted on Tuesday, January 31, 2006 - 10:51 pm:        I have a 1969 Evinrude 4hp lightwin. It is in good shape except for a stripped oil filler screw in the lower unit. Will the lower unit from a 1972 4hp Evinrude be interchangable? I can pick up a 1972 4hp for little cost that has a good lower unit. Thanks.   andrew Moderator Username: andrew Post Number: 1368 Registered: 11-2001 Posted on Wednesday, February 01, 2006 - 05:40 pm:        Gforce421: Are you sure about the numbers you posted? The "30475" is close but not quite right. You can see what the pre-1980 evinrude numbers for a 40HP should be at this link. ********* dhwright: You might be better off asking that question in the Johnson/Evinrude cateogry of the board at MarineEngine.com. This site, OldMarineEngine.com, is focused on old "inboards", not outboards. I'm sure that anyone here that could help you would be happy to, but outboards are not the field of expertise for most of the regulars here. The board on MarineEngine.com is a similar format to this one, so you should have no trouble posting. But you should post your question as a "new discussion" instead of adding it onto an existing thread of messages as you did here. You will see a "start new discussion" link in the blue bar at the top and bottom of the categories.   Robert Baum Visitor Posted on Tuesday, February 14, 2006 - 08:53 am:        I have an Evinrude motor - with the slide bar throttle on the front - around an early 50's model with the numbers 7512-U8544 and Fleetwin oin the side, gas tank on the engine. Looks like a 3hp model but someone told me it was a 7-1/2 hp. I don't think so   andrew Moderator Username: andrew Post Number: 546 Registered: 11-2001 Posted on Tuesday, February 14, 2006 - 08:58 am:        Robert, Your model number is 7512. That is a 7.5HP from 1953. See this link.   NICK BUTTERA Visitor Posted on Saturday, February 25, 2006 - 12:14 am:        I HAVE A 1963 EVINRUDE LARK 6 BIG TWIN IM LOOKING FOR MORE INFO ON TRADE VALUE OR WHERE THE BEST PLACE TO SELL IT MIGHT BE. LOOKING TO UPGRADE. THANKS   andrew Moderator Username: andrew Post Number: 565 Registered: 11-2001 Posted on Saturday, February 25, 2006 - 11:41 am:        You can post it for sale in the classifieds at MarineEngine.com.   GARY BLUNK Visitor Posted on Wednesday, March 08, 2006 - 04:13 pm:        I HAVE JUST GOT A 1970 SOMETHING EVINRUDE 6HP MOTOR FROM A FRIEND AND IT HAS NO MODEL# PLATE ON IT , IT HAS A NAME ON THE COVER (FISHERMAN) WERE COULD I FIND THE MODEL# AND SER.# ON THE BODY THANK YOU   BREW_SARD1 Visitor Posted on Thursday, March 09, 2006 - 10:07 am:        HELLO, I HAVE AN 1979 EVINRUDE SUPER 55, AND I'D LIKE SOME INFO ON IT. I'M INTERESTED IN WHY IT HAS THE LARGE FOOT, AND WHAT THE DIFFERENCE IS BETWEEN IT AND THE REGULAR 55. I APPRECIATE ANY INFORMATION. THANKS, SHANE   andrew Moderator Username: andrew Post Number: 578 Registered: 11-2001 Posted on Thursday, March 09, 2006 - 05:56 pm:        Gary, The model number should be on a nameplate on the mounting bracket, or stamped into a freeze plug or the flywheel. See possible numbers here. Brew, You will need the to find the model number on the motor also. This site is really for old "inboard" engines, you can get more info on outboards on the discussion board at marineengine.com.   gary blunk Visitor Posted on Friday, March 10, 2006 - 02:25 pm:        the only number is on the flywheel 580562 with a G over the number there is no number on the freeze plug or the plate is not on the mounting bracket   brian m Visitor Posted on Tuesday, March 14, 2006 - 01:03 am:        i own a 1993 evinrude 15hp.any one had problems with motor mount bolts breaking off in tiller handle?   andrew Moderator Username: andrew Post Number: 583 Registered: 11-2001 Posted on Tuesday, March 14, 2006 - 08:04 am:        Brian, You should post that question on the MarineEngine.com Board instead. This board, OldMarineEngine.com, is for early style inboard engines.... Thanks.   dennis bourne Visitor Posted on Monday, March 20, 2006 - 07:46 pm:        can you tell me the year of my johnson outboard motor with a 6 horse power. Model number 6r71g. serial number j3386651   andrew Moderator Username: andrew Post Number: 595 Registered: 11-2001 Posted on Tuesday, March 21, 2006 - 07:52 am:        Dennis, That is a 1971, 6HP, see this link We also now offer some Johnson parts on the MarineEngine.com site, see this link   chulo oso Visitor Posted on Friday, March 24, 2006 - 02:58 pm:        i don't know what model of motor i have but if any one can tell me what year and ect from serial number 823-853 IT IS A 110 HP. V4 AND I ONLY FOUND THAT NUMBER NEXT TO THE LETTER R. NUMBER IS R823-853   Catherine Somer Visitor Posted on Friday, March 24, 2006 - 03:52 pm:        I have what appears to be a 4 hp evinrude long-shaft, model: E4BRHLCOB, serial #: B100356. Can someone tell me what year it is? I am trying to sell it. It's my dad's and he doesn't remember much about it. Also does anyone know the price range? Thanks.   andrew Moderator Username: andrew Post Number: 603 Registered: 11-2001 Posted on Friday, March 24, 2006 - 04:45 pm:        Chulo, That doesn't look like a Johnson / Evinrude number... what kind of motor is it? Catherine, That is a 1985 model year motor. You can check the price guide on MarineEngine.com at this link. You can post it for sale in the classifieds   chulo oso Visitor Posted on Friday, March 24, 2006 - 10:58 pm:        my motor is a evinrude 110hp v4. i read the number off the top of the motor where the number 1 spark. So it says on the cover   chulo oso Visitor Posted on Saturday, March 25, 2006 - 10:17 am:        ok. i forgot a number. lol. let me see if i can get it right this time. 110hp v4. cover says evinrude. top of motor where the number 1 spark plug reads R8235383. if any one can tell me the year and model and where i can look it up, i would really appreciate it. I have always wanted a boat and i need this info to register it. please. lol   andrew Moderator Username: andrew Post Number: 607 Registered: 11-2001 Posted on Saturday, March 25, 2006 - 04:00 pm:        Chulo, You need the model number (the number you supplied is not the model number), which should be found on a nameplate on the mounting bracket. Once you have found it see this link: model number code 1980 and up   chulo oso Visitor Posted on Saturday, March 25, 2006 - 05:47 pm:        I don't have the little nameplate. i guess i have narrowed it down to only year 86-89. possible models E110TLCD year 86, E110TXCU 87, E110MLCU 87, E110TXCC 88, E110MLCC 88, E110MLCE 89, E110TXCE 89. Found this out at nadaguide.com   matty Visitor Posted on Monday, April 03, 2006 - 06:18 am:        iam trying to remove the drive shaft from a ~1976 55 hp evinrude have the water pump ass. off and the bearing retainer removed also the top shell of the tappered bearing how do you get the shaft out??   PABoater Visitor Posted on Monday, April 03, 2006 - 02:33 pm:        I have an Evinrude 9.9 Serial E0595803 Model 10RCDB Can anyone tell me what year this is ? Thanks   Koby Reitz Visitor Posted on Thursday, April 06, 2006 - 02:11 pm:        My uncle has an old Evinrude Fastwin and I would like to know the year model and horsepower to find a repair manuel. The numbers I found on the plate on the mounting bracket are: 18502S-E05166. Can anyone help me from here? Thanks!   andrew Moderator Username: andrew Post Number: 624 Registered: 11-2001 Posted on Thursday, April 06, 2006 - 02:55 pm:        18502S is 18HP, 1965. See this link. and for manuals use this link and for parts use this link.   Mark Menton Visitor Posted on Sunday, April 09, 2006 - 01:52 pm:        Hi I have a evinrude big twin 40hp. model number 1919634 I need to find the year. Any ideas? Thanks   andrew Moderator Username: andrew Post Number: 631 Registered: 11-2001 Posted on Sunday, April 09, 2006 - 08:02 pm:        Mark, Are you sure about that model number? It doesn't appear to be right. See this link   sea New member Username: sea Post Number: 1 Registered: 04-2006 Posted on Monday, April 10, 2006 - 01:55 pm:        Looking for the model year for an evinrude, 15hp short shaft manual start tiller engine. Model: E15RCOB Serial Number: EO492657 Can anyone help me?   andrew Moderator Username: andrew Post Number: 632 Registered: 11-2001 Posted on Monday, April 10, 2006 - 02:03 pm:        That is a 1985. The "CO" in the model number is "1985 model year". See this link For parts, see this link PS: This website is really for old "inboards"... not outboards. For outboard questions try the board at MarineEngine.com   gkm24 New member Username: gkm24 Post Number: 1 Registered: 04-2006 Posted on Sunday, April 23, 2006 - 10:23 am:        Hi. I have 2 Evinrude engines one is a 4Hp and the other is a 6Hp. Both are twin cylinders. The 4Hp has no tag on the transom mount. How would I obtain the model and serial number? the 6Hp has the model and serial as follows: Model 69866e (the third digit could be a B instead of an 8) Serial B037953. please can you tell me the year of the 6Hp so that I can hopefully get a manual to cover both of them. Thanks very much.   andrew Moderator Username: andrew Post Number: 641 Registered: 11-2001 Posted on Sunday, April 23, 2006 - 11:14 am:        Are you sure about the model number 69866E ? That doesn't match up (nor if it was B instead of 8). See this link. Some of the older Evinrudes have the model number stamped into a freeze plug or into the flywheel.   gkm24 New member Username: gkm24 Post Number: 2 Registered: 04-2006 Posted on Sunday, April 23, 2006 - 11:52 am:        I'm sure that it is correct as I made a special note to be accurate but I was running late for work so I will recheck. I thought it strange as I looked at all the links to engine codes and they did'nt make sense to me either. I may have missed some letters if they were standard for the tag and not stamped into it like the rest. I will return tomorrow after i recheck. Thanks for responding.   gkm24 New member Username: gkm24 Post Number: 3 Registered: 04-2006 Posted on Monday, April 24, 2006 - 02:32 pm:        Just to let anyone know with a 6Hp Evinrude with the same code, 69B66E is 1979.   kevin peterson Visitor Posted on Wednesday, May 10, 2006 - 06:54 pm:        Yes i would like to know what year my outboard is? Its a 9.9 evinrude with the model number 10524c and serial number e0002048 thanks kevin   Frank Jr. Visitor Posted on Wednesday, May 17, 2006 - 12:42 pm:        Hi, I have a 9.9 Evenrude. The ID plate is missing and I would like to know how old it is. On the side of the block is the # 319350. The coils have # 532106N9 on them. The fuel pump/filter is # 329972. Can you tell me what year it is? Frank   Richard Visitor Posted on Tuesday, May 30, 2006 - 09:26 pm:        Hi i have a evinrude lark 40 hp could you please let me know what year it is? serial no. 2409835520 thanks Richard   darrell Visitor Posted on Saturday, July 01, 2006 - 12:45 am:        hi i have a 25 hp evinrude i need to find out the year of my motor b/c im not getting any fire i need to know the year so i can purchase the proper parts for it. serial no.E0003770 model no.25602E   Steve Strupp Visitor Posted on Sunday, July 30, 2006 - 01:08 pm:        I have a Evinrude Lightwin model # 4106D-E04464. What year is the motor? Help!!   andrew Moderator Username: andrew Post Number: 693 Registered: 11-2001 Posted on Sunday, July 30, 2006 - 01:45 pm:        Kevin: 10524C is a 9.9HP from 1975 Frank: Those numbers aren't going to help. You could try posting a picture of it on the board at MarineEngine.com. Richard: That serial number doesn't look right. It should be similar (or at least the beginning of it) to the ones here. Darrell: That is a 25HP 1976. Steve: Is that a 5HP ? If so it's a 1935. If it is 4HP then it's 1971. See parts and manuals here.   Steve Strupp Visitor Posted on Sunday, July 30, 2006 - 02:52 pm:        Andrew: it is a 4hp so it would be a 1971. Thanks for the Info   steve strupp Visitor Posted on Monday, August 07, 2006 - 08:35 pm:        My 1971 Evinrude lightwin 4HP, model4106D does not have any spark. I would like to test the coils. What reading should I look for on the ohm meter   jerrykoz Visitor Posted on Wednesday, August 09, 2006 - 10:39 am:        i have a 1955 15 h.p. evinrude whisper power aquasonic . calls for a j6j plug. what is the proper gap?   Phil Gardner Visitor Posted on Saturday, August 12, 2006 - 11:00 am:        I have an Evinrude JR - Model # is EJRCDR and the serial # is B0109004. Can someone tell me the year it was made, what did it sale for new. Any other information would be appreciated. Thanks, Phil   andrew Moderator Username: andrew Post Number: 706 Registered: 11-2001 Posted on Saturday, August 12, 2006 - 01:25 pm:        Phil, That is a 1986. I don't know what it sold for new. See this link for some of the parts.   Phil Gardner Visitor Posted on Saturday, August 12, 2006 - 02:05 pm:        Thanks for the information Andrew, but according to everything I have seen, the serial number is a different format the anything produced after 1980? That's why I thought if must be older?   Paul Witte Visitor Posted on Sunday, August 20, 2006 - 09:04 am:        Sir, I have a 75 Johnson Seahorse, model number V4AL-15E, Ser # 2363704. Could you tell me the year please. Thank you in advance.   chuck1973 Visitor Posted on Sunday, August 20, 2006 - 08:55 pm:        I have a Super ELTO with number 3190001 stamped on it. I am assuming it is the serial number can anyone give me some info it thanks Chuck   Frank Jr. Visitor Posted on Tuesday, August 22, 2006 - 10:29 pm:        Hi, I have a 9.9 Evenrude. The ID plate is missing and I would like to know how old it is. On the side of the block is the # 319350. The coils have # 532106N9 on them. The fuel pump/filter is # 329972. Can you tell me what year it is? Frank   eric Cohrs Visitor Posted on Friday, December 08, 2006 - 09:20 pm:        i have an old evinrude outboard model# 9422s and serial# eo8611 what year is the motor and what kind of compression does it have to have to run? where can i get parts for it at? thanks eric   ernie Senior Member Username: ernie Post Number: 514 Registered: 01-2002 Posted on Saturday, December 09, 2006 - 05:06 pm:        It's a 1964 9.5 hp short shaft. If you try to turn the flywheel with your hand on the outer diameter it should be hard to turn through top dead center. Both cylinders should feel the same. Just about all parts are still available through your local Evinrude or Johnson Dealer. I just reconditioned 3 of them and had no trouble getting parts from my local dealer. If you are anywhere near Southeastern Mass I may be able to help you. Hope this helps Ernie   gmusicka Visitor Posted on Monday, February 12, 2007 - 01:40 am:        ive got a 55hp evenrude model number 55972 searial number jo1335 would like to know how old it is and if i can still get parts for it . ps its a 3 cylinder. many thanks.   andrew Moderator Username: andrew Post Number: 844 Registered: 11-2001 Posted on Monday, February 12, 2007 - 09:04 pm:        55972 is a 55HP from 1969. You can look for parts here. and here. and for manuals here.   STEPHEN HARRIS Visitor Posted on Wednesday, February 14, 2007 - 02:58 pm:        i have an evinrude 50 hp outboard model no E50 ORNLIC can anyone tell me the year many thanks steve   andrew Moderator Username: andrew Post Number: 845 Registered: 11-2001 Posted on Wednesday, February 14, 2007 - 03:03 pm:        Stephen, Are you sure you are reading that model number correctly? Are you reading it right from the nameplate?   Gary edwards Visitor Posted on Monday, March 19, 2007 - 12:56 pm:        Please can anyone help with the year of my evinrude outboard the model number is AE50TLCEC and the serial number is G02270028 THANKS.   mike wanek Visitor Posted on Thursday, April 05, 2007 - 07:52 pm:        I have an old evinrude 3 horse from the 50's the serial number is 3012-34917. I'm looking for the exact year   Andrew Condie Visitor Posted on Friday, April 06, 2007 - 05:16 am:        thats a 1952 3hp model. That model was the first of the 3hp's and later on became the 4hp. That design has been used by Evinrude/Johnson ever since with very few internal changes. One of if not "the" best small motors ever produced, by any manufacturer.   Jerry Plaisier Visitor Posted on Monday, April 09, 2007 - 11:42 am:        I am looking for the year and horsepower of an Evinrude boat motor with the serial number 6502M-E13271. Thanks, Jerry   RWHIT46684 Visitor Posted on Friday, April 20, 2007 - 08:32 am:        I have a Johnson outboard motor with the ser.# J2889940 mODEL# M0-14E CAN YOU HELP ME WITH THE YEAR OF THIS MOTOR THANKS   Jeepnut666 Visitor Posted on Sunday, April 22, 2007 - 08:34 pm:        Hi just wondering what year my rude is.... E25RCOS s/n E0515282 25 hp need tiller plate the tiller arm broke at the loops for the arm to tilt up and down.. sorry frazzled. Thanks. Jeepnut666   andrew Moderator Username: andrew Post Number: 872 Registered: 11-2001 Posted on Sunday, April 22, 2007 - 08:52 pm:        RWHIT46684, It is probably MQ-14E not MO-14E. That would be 9.5HP from 1968. See this link for manuals. Jeepnut666, E25RCOS is a 1985 25HP Rope Start. You can look at the parts diagrams from the link here.   steve august Visitor Posted on Friday, April 27, 2007 - 10:32 pm:        what is the differnce in a 1975 Johnson, 70hp and a 75hp? thanks steve}}   tfran605 Visitor Posted on Sunday, April 29, 2007 - 06:01 pm:        i just bought a evinrude 6hp and thet M# dose not like like any other ones that i have seen befor. just wanted to know the year of it the the M# is 6504R and the S# J0006390   Brian Kramer Visitor Posted on Sunday, April 29, 2007 - 10:38 pm:        I have a 4.5 hp Envinrude and want to know the year. Model # is JBF4P and serial # is H 0180867. Thanks Brian   Mike Sanyk Visitor Posted on Monday, April 30, 2007 - 10:09 pm:        I have an Evinrude Elto Ace, Model number 4351-06046. The tank is dented, the tiller handle broken and the transom clamp is missing the swivel head. The skeg is undamaged and it has a prop. Anyone interested in this motor for rebuild or parts can contact me by e-mail   Kevin Daly Visitor Posted on Saturday, May 12, 2007 - 03:34 pm:        I have a Evinrude outboard that I am trying to get running. Old Marine motors.com says it is a 1941 3.3 H.P. Can anyone tell me what the point gap and fuel ratio is supposed to be? Thanks Kevin   jeff stallkamp Visitor Posted on Saturday, May 12, 2007 - 09:08 pm:        Model 1509490 serial J0002892 Can you tell me what year this is? Evinrude 150 HP outboard   andrew Moderator Username: andrew Post Number: 874 Registered: 11-2001 Posted on Saturday, May 12, 2007 - 09:28 pm:        tfran605: 6504R is a 6HP 1975. Brian: I don't think JBF4P is a valid model number. Mike: 4351 is a 1.8HP from 1940-41. You could post it for sale in our classifieds. Kevin: Manuals for that 1941 3.3HP are available. Jeff: 1509490 is a 150HP 1979.   Heath Visitor Posted on Sunday, May 13, 2007 - 03:05 pm:        i have a evinrude 6HP 1971.its model number is 6102G...i was wondering what "G" meant thanks   David Reyes Visitor Posted on Saturday, May 19, 2007 - 06:34 pm:        I have a 60 HP Evinrude model E60TTLESM, serial number G 02578160. Can anyone help me in determining what year this engine is?   andrew Moderator Username: andrew Post Number: 876 Registered: 11-2001 Posted on Saturday, May 19, 2007 - 07:19 pm:        Heath, The "G" is probably just the run within that model year. Not relevant for anything now. David, Model E60TTLESM is a 1990. See this link.   vastri Visitor Posted on Sunday, June 24, 2007 - 05:47 pm:        dear friends the numberplate on my 4 hp evinrude contains the following number 4136D B11026 which I cannot trace on relevant site. I would appreciate if you could identify the year and certain other details as thew cowl is missing and I'm trying to find one Thanks in advance.   manu New member Username: manu Post Number: 1 Registered: 07-2007 Posted on Tuesday, July 10, 2007 - 02:05 pm:        please help me finding the year of a 25 hp evinrude outboard engine.the numberplate contains this 256B62E B 9161.Thank you so much   durwood New member Username: durwood Post Number: 1 Registered: 07-2007 Posted on Thursday, July 19, 2007 - 08:55 am:        I have an Evinrude Lark V Selectric Shift, model # 43073D. I have not been able to find this model # from any of the lists provided. I'd like to know the year built and any other info. Thanks.   qtamo Visitor Posted on Sunday, July 29, 2007 - 05:05 pm:        I'm buing a 20 HP Evinrude, and all I know is a serial number: b-32081 Any idea what year this might be?   Roger Ward Visitor Posted on Monday, July 30, 2007 - 02:56 pm:        Hi. We just bought a 1970 boat with an Evinrude 25 hp motor. The serial or model number is 25102S or 251025, there is another number: E06126. We don't know if the motor is the first one for that boat or many of several, but one site I looked at indicated the motor to be a 1971. Can you verify this so we can find the right parts list? Thanks so much.   christine Visitor Posted on Thursday, August 09, 2007 - 10:11 am:        I need to find out the year of my engine the serial number is 212909 model number217-58880 its a sears roebuck. any info would be great   colleen New member Username: colleen Post Number: 1 Registered: 08-2007 Posted on Monday, August 13, 2007 - 01:16 pm:        Have an Evinrude 4hp, 2 stroke. Model # E4RDHCDE, serial # B0100804. What year is it? Thanks for your help!   Julio Ejey Visitor Posted on Tuesday, August 28, 2007 - 07:14 am:        Hello, I have a Evinrude Big Twin 40hp engine, I think its from around 1960s, but not sure. Where can I find Its serial number, cant seem to find it anyware! Thanks!   kevin saulnier Visitor Posted on Sunday, September 02, 2007 - 07:38 pm:        hi i have an evinrude jr i think it"s a 1964 model#cejrcdr serial#b0100200 i would like to know what is the hp of this motor please. thank you   billsfan90294 New member Username: billsfan90294 Post Number: 1 Registered: 12-2007 Posted on Sunday, December 09, 2007 - 02:25 pm:        I have a 40 HP Evinrude that I can not find a model number on it. I really need to find the year and model number. It is a 2 CYL 40 HP with Serial number 11928 Can Someone please Help. Thanks   andrew Moderator Username: andrew Post Number: 899 Registered: 11-2001 Posted on Sunday, December 09, 2007 - 02:50 pm:        Bill, The serial number won't identify it. The model number should be on the same nameplate where you found the serial number. You haven't said "approximately" what year it is, but see pre-1980 model numbers here.   Vincent T Visitor Posted on Tuesday, February 05, 2008 - 03:42 pm:        I have a 1962 40hp Evinrude mod.35932L, need info on this motor, looking for a cowl cover for it. Is it a Lark 111 or Lark 1v, electric shift or standard   Chad Visitor Posted on Saturday, February 16, 2008 - 03:29 am:        I have a 100 Horsepower outboard Evinrude electric start/trim. There are no nameplates or identifying placards. I have found various numbers stamped on different parts of the engine/mounting bracket/shaft but found no relevance to serial number. Was told it is a mid-90's model but want to verify for maintenance manual purposes. PLEASE HELP!!!!!!!! Aloha, Chad   Songman07 Visitor Posted on Sunday, February 17, 2008 - 04:58 pm:        I have an evinrude motor Model # e2rcoc or maybe ezrcoc can you tell me the year and the horse power this motor thanks   doug thomasson Visitor Posted on Wednesday, February 20, 2008 - 10:21 pm:        I have a 48hp evinrude, model E48ESLEDS. I was told to use "INTRODUCES" as the code representing nos. 1234567890. The ED would make it a 1996, is this correct? Also, what ratio of oil to gas? Thanks, Doug T.   Bob Curtiss Visitor Posted on Monday, March 31, 2008 - 09:27 pm:        I am considering purchasing a 1993 Evenrude 70hp that is in excellent condition along with a Striper 18' 1993 boat, trailer, etc. The owner says the motor runs out to 5500 rpm and gives the boat about 25mph top speed. Does anyone know if a slightly larger or pitched prop - dropping the rpm to say 5000rpm would increase the speed of the boat? Thanks, Bob   miro Senior Member Username: miro Post Number: 319 Registered: 11-2001 Posted on Tuesday, April 01, 2008 - 12:41 pm:        With that combination of HP, boat length, and top speed, you're doing about right - best way to increase speed is make the boat lighter. A change of 100lbs can make a big difference. The placement of weight in the boat also affects top speed. The flatter the angle to the water, the less wetted area and the faster it will go. But I doubt that you'll see anything major - not more than 3%-5% improvement - plus you'll be guzzling fuel at top speed miro   [email protected] Visitor Posted on Tuesday, April 01, 2008 - 09:57 pm:        Thanks Miro, your information is very well taken! Bob   [email protected] Visitor Posted on Wednesday, April 02, 2008 - 09:48 pm:        Is the 70hp Evenrude enough motor for the 18' Striper boat? I don't mind 25mph as we're not interested in going faster unless we can do so with the existing engine. Also would a larger engine with higher top end be more costly gas wise than the 70hp if we got it up on plane and cruised at 20mph? Just checking before I buy. Thanks, Bob   cliff hixson Visitor Posted on Wednesday, May 28, 2008 - 09:36 pm:        looking for year and hp of old evinrude. the numbers i found are 25526 10883.The engine cover has the name Lark.   ARTHUR RAMIREZ Visitor Posted on Saturday, June 21, 2008 - 04:56 pm:        EVINRUDE 9.9 MODEL E1ORCID SERIAL NO. EOOO2053 WOULD LIKE TO KNOW YEAR HAVING TROUBLE STARTING AS STARTING POINT ON THROTTLE I NO LONGER VISABLE THANK YOU   andrew Moderator Username: andrew Post Number: 933 Registered: 11-2001 Posted on Saturday, June 21, 2008 - 05:36 pm:        E10RCID is a 1981 rope start. This board is for antique style inboard engines. You should ask questions about that Evinrude outboard on the MarineEngine.com board in the Johnson/Evinrude category. Thanks.   ranger New member Username: ranger Post Number: 1 Registered: 06-2008 Posted on Wednesday, June 25, 2008 - 03:22 pm:        I have a 1979 55hp Evinrude, model #55975C. Could anyone tell me what the "C" stands for at the end. Thanks.   Bill Tillack Visitor Posted on Friday, June 27, 2008 - 12:23 am:        I thinking of purchasing a 9.5 evinrude/johnson sportwin outboard motor model# 9822e serial # E08048 what year is this? Are parts still accessible? thanks Bill   ranger New member Username: ranger Post Number: 2 Registered: 06-2008 Posted on Saturday, June 28, 2008 - 11:25 am:        Bill Tillack, Evinrude 9.5 Model 9822E = 1968 http://www.marineengine.com/manuals/evinrude/ Sure, just search the internet, parts are everywhere.   phillip m. oels Visitor Posted on Tuesday, July 08, 2008 - 01:56 pm:        need help identifying a 15 hp evinrude outboard. model 15804b, serial#e0006256---thanks, phil   ranger New member Username: ranger Post Number: 3 Registered: 06-2008 Posted on Thursday, July 10, 2008 - 05:31 pm:        Phil, It is a 1978.   chillyattitude Visitor Posted on Sunday, July 20, 2008 - 12:08 am:        trying to find the year of a 50 hp evinrude... model # E50BELC0B Serial # J0539352   andrew Moderator Username: andrew Post Number: 934 Registered: 11-2001 Posted on Sunday, July 20, 2008 - 10:13 am:        That is a 1985. The "CO" in the model year is 1985. You can get parts and manuals for that motor from the MarineEngine.com website.   jodi New member Username: jodi Post Number: 1 Registered: 08-2008 Posted on Friday, August 01, 2008 - 12:50 pm:        Hi, I just received an evinrude engine and I have no idea what year it is. Please help Model no. 652735 Serial no. 62119   terry g smith Visitor Posted on Tuesday, September 02, 2008 - 05:31 pm:        can someone plz tell me the value of an evinrude motor with the serial number 3012-48900   Gerard Krause Visitor Posted on Monday, September 08, 2008 - 12:12 pm:        I have an Evinrude 8 HP, model E8R CEC, S/N B1953181. I have been told it is a 1989. Can that be confirmed by the S/N?   REX KENNEDY Visitor Posted on Monday, September 08, 2008 - 02:18 pm:        I HAVE A 35HP EVINRUDE ELECTRIC START AND ROPE PULL DONT KNOW YEAR, NO TAGS ANY WHERE. IT HAS A BLUE BOTTOM HALF THE COWL IS RED, WHITE ,BLUE, WITH THE # 35 AND EVINRUDE PRINTED IN THE BLUE, AND RED STRIPE UNDER IT.THE MAN SAID THEY DID SOMETHING TO THE POWER HEAD DID FIND THESE # ON SOFT PLUG E20CRLCO5.   Ed Harvey Visitor Posted on Monday, September 08, 2008 - 05:06 pm:        I have a 7.5 hp Evinrude Aquasonic Ser# 7518-29775 which uses a pump up pressurized tank, can anyone tell me what the year of manufacture is?, Thanks, Ed   Ed Harvey Visitor Posted on Monday, September 08, 2008 - 05:32 pm:        I forgot a Question about this 7.5 hp Evinrude Ser# 7518-29775, How does the gear shift rod disengage from the lower unit for Impeller replacement, Thanks, Ed   ernie Senior Member Username: ernie Post Number: 866 Registered: 01-2002 Posted on Monday, September 08, 2008 - 06:44 pm:        To remove the shift rod you need to remove the powerhead (engine) from the lower unit. The top of the shift rod is threaded and has a nut on it where it attaches to the shift lever.   S.B.Rose Visitor Posted on Tuesday, September 09, 2008 - 05:57 pm:        I found an Evinrude Junior Model#EJRCDR. Can anyone tell me the year, HP and value (approx) of this enjine. It will run and is in good shape. Thanks, Steve   ernie Senior Member Username: ernie Post Number: 867 Registered: 01-2002 Posted on Tuesday, September 09, 2008 - 06:09 pm:        Your best bet is to go to the Antique Outboard Club www.aomci.org You can advertise it there or use the ask a member option. There is an FAQ section as well Hope this helps Ernie   wade brost Visitor Posted on Wednesday, September 10, 2008 - 10:29 pm:        hi I have a omc 4cyl motor model number 990234e1 and sereal number w120594 I can`t find any info on marinengine.com its supposed to be in a 1970 glasstron boat but I don`t know what size or horse power it is to geta a repair manual Thanks   Kristoffer Sobakk Visitor Posted on Tuesday, September 16, 2008 - 04:13 am:        Hi. I have a Evenrude 50 (E50 BELCIC, serno B002115). I'm about to replace Thermostat for this motor, as it is running hot. Try to find where the thermostat is mounted, but cannot find it. Is user manuals avaliable in PDF format? (I'm living in Norway/Europe, so electronic format would be prefereable)   Donnie Bozard Visitor Posted on Tuesday, December 30, 2008 - 08:33 am:        I have an old evinerude outboard and would like to know the year model if someone could help.The number on the side is 4407-12149 Thanks   andrew Moderator Username: andrew Post Number: 980 Registered: 11-2001 Posted on Tuesday, December 30, 2008 - 09:07 am:        That is a 1.1HP 1946-47 model 4407 See this link for model id. and this link for manuals.   Donnie Bozard Visitor Posted on Tuesday, December 30, 2008 - 09:26 am:        Thanks for the info Andrew. The motor does run. Would you know the value of it? It might be for sale one day. Thanks   andrew Moderator Username: andrew Post Number: 981 Registered: 11-2001 Posted on Tuesday, December 30, 2008 - 09:57 am:        No, I don't know the value. Sorry.   martin e woerner Visitor Posted on Thursday, March 26, 2009 - 10:54 am:        where can i look on my engine to determine hp and year the placard has been popped off i think its 150-175 hp evinrude 1988-1994   andrew Moderator Username: andrew Post Number: 999 Registered: 11-2001 Posted on Thursday, March 26, 2009 - 12:40 pm:        You could post a picture of it in the johnson/evinrude category on the board at MarineEngine.com.   martin e woerner Visitor Posted on Thursday, March 26, 2009 - 02:10 pm:        post what picture, aren't there numbers on the engine to let me know what engine it is , numbers are all over the engine which ones do i need to look at to determine hp   andrew Moderator Username: andrew Post Number: 1000 Registered: 11-2001 Posted on Thursday, March 26, 2009 - 03:00 pm:        The numbers would be on the nameplate. I thought you said the nameplate is gone. The number might also be stamped into a freeze plug or the flywheel,but with that vintage it might not be anywhere but the nameplate. You can see the possible model numbers from the guide here.   Igor Matthew Visitor Posted on Saturday, March 28, 2009 - 09:53 pm:        Hello Andrew, Can you please tell me a year for this 70HP Evenrude I have: Model# E70PL4SS Serial# 16008405 Thanks!   andrew Moderator Username: andrew Post Number: 1001 Registered: 11-2001 Posted on Sunday, March 29, 2009 - 03:47 pm:        Igor, That is a model year 2000. The "SS" in the model number is 2000. See this link.   preacher_duck New member Username: preacher_duck Post Number: 1 Registered: 03-2009 Posted on Monday, March 30, 2009 - 11:05 pm:        I have a evinrude motor model mo 14 e serial j2914007 can anyone tell me what year this is   wishihad Visitor Posted on Thursday, April 02, 2009 - 11:48 pm:        I recently inherited a 3hp Johnson with the following on the name plate. But, I can't seem to cross reference it to figure out what year it is. jw-10 1080724   andrew Moderator Username: andrew Post Number: 1002 Registered: 11-2001 Posted on Friday, April 03, 2009 - 08:38 am:        JW-10 is a 3HP 1952-54. There are manuals for it on the MarineEngine.com site here.   garry Visitor Posted on Sunday, May 03, 2009 - 10:12 pm:        I have a 1955 15 HP Evinrude Outboard 15014 could someone tell me if I have to mix oil with the gas to get it stater.and what size GAS PRIMER BULB*5/16 HOSE ? thank you   kirk90 Visitor Posted on Friday, May 08, 2009 - 03:09 pm:        I have a 30hp evinrude/lark with the serial numbers 25526-23472. Im trying to find the year of this engine so i can get a manual   riggerrik New member Username: riggerrik Post Number: 1 Registered: 05-2009 Posted on Wednesday, May 13, 2009 - 07:14 pm:        Hey, I just wondering if someone knows what the "R" means at the end model number... Like this 1969 40hp. evinrude..40953R... thanks   lbbbbaa New member Username: lbbbbaa Post Number: 1 Registered: 05-2009 Posted on Saturday, May 30, 2009 - 10:43 am:        Old evinrude motor with numbers 4201-02085. Anyone know the year and hp   andrew Moderator Username: andrew Post Number: 1007 Registered: 11-2001 Posted on Saturday, May 30, 2009 - 11:59 am:        Kirk90: 25526 is a 1956, 30HP. See this link for manuals. riggerrick: I don't think that "R" has any significance. Usually that last letter was to designate the model "run" within the model. Ibbbaa: 4201 is 0.9HP 1937. See this link   riggerrik New member Username: riggerrik Post Number: 2 Registered: 05-2009 Posted on Monday, June 01, 2009 - 12:04 pm:        This engine is differant than the other "69's"40 Hp. engines that I have. I was wondering if it meant "research".... The Water pickup tubes, and exhaust stack are differant..It also came with a brass speed prop...   hal sayre Visitor Posted on Monday, June 01, 2009 - 04:16 pm:        I just purchased a 40 hp evenrude model #40454-s and serial # j00010112. Could you please explain how to determine the year and also what is the gas/oil ratio? thanks   AlexXavier Visitor Posted on Friday, June 26, 2009 - 12:36 pm:        Hey, I just bought a speed boat with a 80HP Evinrude engine on it. I need to know if I can still find parts like impellers and such for this engine. The Model Number is: 80693-C and the Serial Number is: E03086. Any info is greatly appreciated Thanks, Alex X. Contact me on here or by e-mail at [email protected]   [email protected] Visitor Posted on Sunday, July 05, 2009 - 02:26 am:        I.m looking to purchase a evinrude lightwin serial no#9806a-e04433 but it needs some repairs but I don,t know what year it is?   [email protected] Visitor Posted on Sunday, July 05, 2009 - 02:38 am:        I.m looking to purchase a 3HP evinrude lightwin serial no#9806a-e04433 but it needs some repairs but I don,t know what year it is? When I pull the cord to start it , the motor makes a grinding noise. can anyone give me an idea whats wrong? It was running ok then killed, when I atemped to restart the noise started when I pull the cord.   Maryann Visitor Posted on Saturday, August 08, 2009 - 03:35 pm:        I have an older 40 hp Evinrude Norseman motor. It doesn't have a plate on it that anyone can find to detect what year it is. We have found these numbers: 330737 KD2 and 387442 D2 which I'm sure are just part numbers found on the mounting transom bracket. I have been told that it most likely is a 70's model, but need exact numbers to know for sure and get parts and a manual for this. Any help would be great!   Tom Harvey Visitor Posted on Monday, September 07, 2009 - 11:34 pm:        I have a 1965 evinrude 16ft tri haul boat it has a v4 inboard motor but cant find who made the motor the model #DU-11 AM serial# j0010746 would like to find a manual for this motor thank you for any help you can give thanks Tom   tinabelle New member Username: tinabelle Post Number: 1 Registered: 09-2009 Posted on Thursday, September 10, 2009 - 04:40 pm:        I am trying to find out the year and horsepower of my EvinRude Fastwin, serial # 15028-06731. Thank You.   CloroSanchez Visitor Posted on Friday, September 11, 2009 - 01:26 pm:        I would like to know how I can find the year and horsepower for a motor with the serial and model numbers? 25533 03098 Also the fuel type straight gas or mix? Thank You.   cutter Visitor Posted on Friday, September 11, 2009 - 06:57 pm:        I would like to know the year of my Evinrude 15 HP outboard motor SN E0492394/ Mod. No. E15RCOB Also need to know the oil/gas fuel mix   phillysyr New member Username: phillysyr Post Number: 1 Registered: 09-2009 Posted on Sunday, September 13, 2009 - 10:19 am:        I have inherited my wifes grandfathers 1970 15 ft Alum. Starcraft with 33 HP Evinrude "Twin Ski" what would the gas to oil ratio? I'm told by my brother in law this boat should go about 28 mph, but it doesn't come close. Probably closer to 12 mph. it's been garaged for 19 years, it starts fine and sounds good, just fish no speed. Any ideas? I know that gramps had it set up for fishing only, I have pitched the motor using the "bar" on the transom, and that helped, I removed the "fish on troller" and that helped a little I think. That's the end of my boat knowledge.   peter david Visitor Posted on Tuesday, September 22, 2009 - 10:28 pm:        hi i have an old eninrude jubior engine probably 1.1 hp as well as a choke it has two knobs on the front with arrows does anyone know what they do ? The model is aejrcdr,and seriel isao306471 australia thanks for any info   Hong Visitor Posted on Saturday, October 10, 2009 - 07:31 pm:        just bought 16ft 1980 edelbock bass boat.wondering if the engine is original w/it. assuming it 70hp evinrude, cover says 70 triumph, and engine casing has the numbering 318434 on it. thanks   Hong Visitor Posted on Saturday, October 10, 2009 - 08:39 pm:        regarding previous message-boat is a 1980 eldocraft not edelbock, sorry   dano New member Username: dano Post Number: 1 Registered: 12-2009 Posted on Wednesday, December 16, 2009 - 10:10 pm:        Hi just looking for a little help with what year my motor is. I am really just looking for a prop.The model # is E4RDHETB and it's a 4hp deluxe. the prop is a 3 blade the number on it is 175092 and it look as if the sizes is 8.6 X 5.5 if this is the right prop for it the guy I got it from said it was all original parts. Thanks   homer New member Username: homer Post Number: 1 Registered: 01-2010 Posted on Saturday, January 16, 2010 - 12:22 pm:        I am preparing to sell an Evinrude Sportwin Model 4423, serial number 22004 and need to know what year and what HP it is. The original owner penciled on the parts list that came with the motor when I bought is says it is 1946. An online site claims it is made between 1947-1951 and is a 3.3 HP. Is this information right?   andrew Moderator Username: andrew Post Number: 1037 Registered: 11-2001 Posted on Saturday, January 16, 2010 - 01:41 pm:        Yes, that is correct see Evinrude 4423   homer New member Username: homer Post Number: 2 Registered: 01-2010 Posted on Saturday, January 16, 2010 - 02:15 pm:        Thanks very much. This is a great forum.   Cody Kurwicki Visitor Posted on Monday, January 18, 2010 - 08:31 pm:        I am trying to find some info on these numbers Model#E25ROTE Serial#30215437 25 horsepower I also have these numbers from the carburator tag 393018 25 22BI 33355 D2 I need a carb diagram any ideas where???   kevinwitherspoon Visitor Posted on Saturday, March 06, 2010 - 12:09 am:        i have an evinrude 7.5 fleetwin #7520 04297 would like to know what year. and if this si a good motor to run on 13.6ft jon boat?   andrew Moderator Username: andrew Post Number: 1045 Registered: 11-2001 Posted on Saturday, March 06, 2010 - 10:24 am:        Cody, I think you might have a letter wrong in that model number. Could it be E25RCTE ? that would be a 1983. See this page. **************** Kevinwitherspoon, That is a 1956, 7.5 HP model 7520. We have the drawings posted here 7520 and we have manuals here 7520 ****************   shaqsfriend New member Username: shaqsfriend Post Number: 1 Registered: 03-2010 Posted on Sunday, March 14, 2010 - 06:34 pm:        I have an evenrude big twin 35hp ser#25034-04701 and want to know what year it is. Any help?   fishengreen New member Username: fishengreen Post Number: 2 Registered: 01-2010 Posted on Monday, March 15, 2010 - 09:29 am:        Hello Shags, That motor is a 1958. Click here for parts diagrams and parts Parts   Caleb Bollman Visitor Posted on Wednesday, March 17, 2010 - 01:15 pm:        I have an Evinrude 15hp, tillered outboard, Mod.# E15RCOB, Ser.# E0490898. What year is it? I would like to get a manual for it and a parts catalog or schematic would be nice. Anybody have any suggestions?   fishengreen New member Username: fishengreen Post Number: 3 Registered: 01-2010 Posted on Thursday, March 18, 2010 - 09:49 am:        Hello Caleb, That motor is a 1985 I have attached a link below for a OEM service manual and a link to a parts catalog. Service Parts   Caleb Bollman Visitor Posted on Friday, March 19, 2010 - 01:47 pm:        fishengreen, Thanks for the info, I appreciate it. Caleb   WILLIAM WAGSTAFF Visitor Posted on Wednesday, March 24, 2010 - 07:26 pm:        i have a old evinrude outboard motor can anyone tell me what the year and horse power it is and where i can fiend a operators manual for it the serial numbers 3012-42502   andrew Moderator Username: andrew Post Number: 1057 Registered: 11-2001 Posted on Wednesday, March 24, 2010 - 07:41 pm:        The model number is the first part of the serial number "3012" It is 3HP, 1952-54 Manuals are available here.   maderr Visitor Posted on Thursday, March 25, 2010 - 06:03 am:        I have a Evinrude 25hp.It is red and white dont know what year it is plat is gone with #.Block has number 302542 but dident find nothing other than that.Can anyone help me?   coolmate New member Username: coolmate Post Number: 1 Registered: 03-2010 Posted on Sunday, March 28, 2010 - 02:09 am:        Hi, can anyone plz tell me the year of manufacture for my boat's Engine, Its make is Evinrude (48hp) Model No: E48CELCSS Serial No.: A364309 Thx   William Kibzey Visitor Posted on Monday, March 29, 2010 - 01:05 am:        hi i have a V4 120 HP Evinrude s/n C7239026, model #CE120TLCM , i am not sure about the "M" i think it is a 1989 i need the year to buy a Manual thank you   fishengreen Member Username: fishengreen Post Number: 5 Registered: 01-2010 Posted on Monday, March 29, 2010 - 12:49 pm:        Hello William, I do believe that your model number should read E120TLCEM = 1989 you can access a manual Here OME Manual   code white Visitor Posted on Monday, March 29, 2010 - 07:13 pm:        i got a evinrude ecto i need to figure out the year and hp its 36in long metal gas tank no numbers except 102017 near the spark pluge and 4351 /50278 stamped omto the motor. theres a switch for lean or rich ranging 1-5 all help would be awsome it needs crank bearings and fuel mixture ratio if any   fishengreen Member Username: fishengreen Post Number: 6 Registered: 01-2010 Posted on Tuesday, March 30, 2010 - 09:51 am:        Hello Code, the model number is 4351 and that shows it to be a 1940 - 41 unfortunately we do not have the parts you are looking for but we do have drawings if you need.   code white Visitor Posted on Tuesday, March 30, 2010 - 07:13 pm:        Thanks i can get the bearings the hard part is gona be getting them out. i restored a 12 foot fiberglass boat that i paid $50 for now im restoring the evinrude, he was asking 60 i beat him down to 40   Steve Gallington Visitor Posted on Wednesday, April 07, 2010 - 10:25 am:        I just bought a 1975 Trump 25 Ketch, with a Evinrude 6HP kicker. She sat idle on Lake Travis for three years, so the motor needs cleaning and repair/reconditioning. model: E6RLENM s/n: B08950830. Made in Belgium. Thanks! Steve   Ken Coenen Visitor Posted on Saturday, April 10, 2010 - 05:51 pm:        Would anyone know the year of a 25 hp. evinrude boat motor with a serial no. of 25253RE002813? Thank You.   duaneandrus New member Username: duaneandrus Post Number: 1 Registered: 04-2010 Posted on Sunday, April 11, 2010 - 12:22 pm:        I have an Evinrude Fastwin 15 Serial # 15016-24319 Need help finding the year. Thank you. Duane   fishengreen Member Username: fishengreen Post Number: 7 Registered: 01-2010 Posted on Monday, April 12, 2010 - 11:13 am:        Hello Ken, that model number belongs to a 1972 25 hp   fishengreen Member Username: fishengreen Post Number: 8 Registered: 01-2010 Posted on Monday, April 12, 2010 - 11:16 am:        Hello Duaneandrus, and your model number belongs to a 15 hp made in 1956   Brent Halks Visitor Posted on Monday, April 12, 2010 - 09:29 pm:        I have a 115 evinrude but I need to know what information I need to find the year and model of it....I need to rebuild it ...how much would that cost (ball park figure)   Danita Marrs Visitor Posted on Saturday, April 17, 2010 - 07:37 pm:        I have a boat motor that I was told was an Evanrude 150. There is an "M" in a box above the numbers J150TLCDC J7153812 It runs great and I need to sell it to help pay for my son to get in school this year. It's on a Bayliner. The boat is junk, but the motor and trailor are good. Any advice or info? Any help much appreciated! Thank You!   Danita Marrs Visitor Posted on Saturday, April 17, 2010 - 08:25 pm:        I'm guessing here because none of the charts matched mine exactly, but is it a Johnson 150, trim and tilt, 20" shaft made in 1986 in Canada? Also, it's white. Sorry if this is the wrong place to post.I have pics...   gargoyle New member Username: gargoyle Post Number: 1 Registered: 04-2010 Posted on Sunday, April 18, 2010 - 08:53 pm:        Have an old Johnson Model 1D11K the one could be an L serial # 1682694 has the flip up hood and the oil and cranking info on the inside of the cover Any information on it would be greatly appreciated   82airborne New member Username: 82airborne Post Number: 1 Registered: 05-2010 Posted on Sunday, May 02, 2010 - 12:11 pm:        Mine is a Big Twin Evinrude, model #403520. Any info would be appreciate.   fishengreen Member Username: fishengreen Post Number: 9 Registered: 01-2010 Posted on Monday, May 03, 2010 - 12:14 pm:        Hello Airborn, That motor is a 1963 40 HP Below is a link to parts drawings numbers. We also have a great selection of parts to keep it running. Parts   dustyman New member Username: dustyman Post Number: 1 Registered: 05-2010 Posted on Tuesday, May 04, 2010 - 06:49 pm:        hey i have a evinrude 120 outboard, the mod no is : E120TLCEM. the serial no is : G02334674. what year is this thing? i need to buy parts!! lol   fishengreen Member Username: fishengreen Post Number: 10 Registered: 01-2010 Posted on Wednesday, May 05, 2010 - 10:31 am:        Hello Dustyman, that motor you have their is a 1989 120 hp I have a link below where you can find all the related parts to that motor. Parts   fly4fish81 Visitor Posted on Thursday, May 06, 2010 - 07:58 pm:        I have an evenrude big twin 40hp Serial# 01735 Model# 35028m and want to know what year it is. Any help?   fishengreen Member Username: fishengreen Post Number: 11 Registered: 01-2010 Posted on Friday, May 07, 2010 - 10:03 am:        Hello Fly, You have a 1962 40 hp. I have a link below where you can find all the related parts to that motor including pert drawings with numbers. Parts Drawings.   fly4fish81 Visitor Posted on Friday, May 07, 2010 - 06:18 pm:        Thanks.   lane Visitor Posted on Saturday, May 08, 2010 - 10:15 pm:        what is the year of my evanrude motar the serial number is 25902be02686   dave_myers Senior Member Username: dave_myers Post Number: 84 Registered: 11-2006 Posted on Sunday, May 09, 2010 - 01:47 am:        Lane, Would be nice to say PLEASE!   fishengreen Member Username: fishengreen Post Number: 12 Registered: 01-2010 Posted on Tuesday, May 11, 2010 - 03:52 pm:        Hello Lane, that would be a 1969 25 hp parts   malcolm mcgregor Visitor Posted on Wednesday, May 12, 2010 - 05:49 pm:        i have two stroke 4hp model num 49b 35d can anybody tell me what year it is   Ctutti Visitor Posted on Friday, May 14, 2010 - 11:14 am:        Can you tell me what year this motor is? Evinrude MOD#25r74m SER# E4011095   kin cornelius Visitor Posted on Wednesday, May 19, 2010 - 02:35 pm:        My 40 hp motor has a model #40605 R and serial #H0001853 this motor also has a 25 inch shaft. What do I have? The motor is in almost new condition.   fishengreen Member Username: fishengreen Post Number: 13 Registered: 01-2010 Posted on Wednesday, May 19, 2010 - 05:25 pm:        Hello Kin, that is a 1976 40 hp, I have attached a link below for parts. Part   fishengreen Member Username: fishengreen Post Number: 14 Registered: 01-2010 Posted on Wednesday, May 19, 2010 - 05:28 pm:        Hello Ctutti, That is a 25 hp made in 1974. I have attached a link to parts below. Parts   fishengreen Member Username: fishengreen Post Number: 15 Registered: 01-2010 Posted on Wednesday, May 19, 2010 - 05:29 pm:        Hello Malcolm, I am sorry but I do not recognize yours   David Vickers Visitor Posted on Monday, May 31, 2010 - 12:38 pm:        Serial # E70TLCCA Model G 1801656 Trying to figure out what year motor this is. Thanks For any help David   otis194 Visitor Posted on Monday, May 31, 2010 - 09:14 pm:        I have a 60 hp johnson/evinrude model number 60653 R super sea horse electric. im searching for the year of the engine and owners manual info and oil to fuel ratio. engine runs good.   swampidog New member Username: swampidog Post Number: 1 Registered: 06-2010 Posted on Saturday, June 05, 2010 - 09:25 am:        I have a 50 hp evinrude with the following #s E50belcic(model) andj0002946 as the serial. What year engine is this, what was the original factory prop? what was the original diameter and pitch>   Carrie Dhaese Visitor Posted on Sunday, June 06, 2010 - 03:09 pm:        i found an old evinrude outboard in an old barn ser.# 3014-12268 any info at all would be greatly appreciated. yr./hp. looking to get working again. thank you.   doc_wright New member Username: doc_wright Post Number: 1 Registered: 06-2010 Posted on Sunday, June 06, 2010 - 09:11 pm:        I have anEvinrude Elto Ser # 4203-03365 What is it. I know it is a 2 cycle very small engine.... and now it runs, not well, but runs. Thanks a ton, Doc Wright   fishengreen Member Username: fishengreen Post Number: 16 Registered: 01-2010 Posted on Tuesday, June 08, 2010 - 03:45 pm:        Hello Doc, that appears to be a 1937 0.9 hp   doc_wright New member Username: doc_wright Post Number: 2 Registered: 06-2010 Posted on Tuesday, June 08, 2010 - 09:03 pm:        Thanks a ton. I would like to find out about original colors and such for when I really have it running great.   t gieseke Visitor Posted on Monday, June 14, 2010 - 06:03 pm:        i am trying to find out what year motor i have. i cant find a model number but the serial number i have is ::: 10016 09645 there are no letters or anything like that. any info will help tremendously as i need a seal kit for the lower unit. thanks   eric jones Visitor Posted on Thursday, June 24, 2010 - 09:06 am:        i have a evinrude 4 plated e4brc1g b096446 can you please help with any details   fritzdog07 New member Username: fritzdog07 Post Number: 1 Registered: 06-2010 Posted on Thursday, June 24, 2010 - 02:00 pm:        i have a 9.9 evenrude but i dont know the year of this outboard the model number is 104240 and the serrial number is e0011743 any help in this matter is more then welcome   Mark Konos Visitor Posted on Saturday, June 26, 2010 - 09:17 pm:        Can you tell me the year of my ELTO 4266-19261 It was running fine when I hung it up in my attic in 1970 and today I brought it out. I am thinking of donating it to the Madisonville LA museum if it qualifies. Any informaton would be appreciated. Thank You in Advance...   Martial Trudel Visitor Posted on Monday, June 28, 2010 - 07:50 pm:        Hi i just purchased a 50 evinrude.not sure of year.model # is e50becnr can you please help me Thanx   fishengreen Member Username: fishengreen Post Number: 17 Registered: 01-2010 Posted on Thursday, July 01, 2010 - 12:43 pm:        Hello T Gieseke, according to the info you provided that is a 10 hp 1958 here is a link for Drwings.   fishengreen Member Username: fishengreen Post Number: 18 Registered: 01-2010 Posted on Thursday, July 01, 2010 - 12:48 pm:        Hello Eric, according to the info you provided that looks to be a 1981. 4hp click here for parts.   fishengreen Member Username: fishengreen Post Number: 19 Registered: 01-2010 Posted on Thursday, July 01, 2010 - 12:58 pm:        Hello fritzdog07 according to the info you provided that is a 1974 9.9 hp unfortunately we do not have access to drawing at the moments   fishengreen Member Username: fishengreen Post Number: 20 Registered: 01-2010 Posted on Thursday, July 01, 2010 - 12:59 pm:        Hello Mark, is that a merc? can you provide me the hp plz?   fishengreen Member Username: fishengreen Post Number: 21 Registered: 01-2010 Posted on Thursday, July 01, 2010 - 01:01 pm:        Hello Martial Trudel, according to the info you provide that is a 1982 50 hp click here for parts.   tankersmitty Visitor Posted on Friday, July 02, 2010 - 04:28 pm:        i have an evinrude outboard with a serial number of 3012-31352, can you help me with finding a make and model and year based on this information   danieljohn Visitor Posted on Wednesday, July 14, 2010 - 06:47 pm:        anyone interested in buying a 1938 evinrude elto ace. it is in great condition.}   danieljohn Visitor Posted on Wednesday, July 14, 2010 - 10:57 pm:        tankersmitty, best i can tell is it looks as though what you got there is between a 1952-54 3 hp outboard   Roxanne L Visitor Posted on Wednesday, July 14, 2010 - 11:05 pm:        I have an Evinrude motor withe model number 304781 with a 2 under it. Can anybody tell me the info on this? We are trying to sell it and i would like to know details before selling it. Thank you   sharris New member Username: sharris Post Number: 1 Registered: 07-2010 Posted on Saturday, July 17, 2010 - 05:12 pm:        trying to find the yr on 25hp evinrude model 25953r serial #e0001739 can someone help me   tchakmart New member Username: tchakmart Post Number: 1 Registered: 07-2010 Posted on Sunday, July 18, 2010 - 05:14 pm:        i am trying to find out what kind of outboard i have on my runabout i just bought. i believe it is an evinrude and the model # is E60TLC0. what can you folks tell me about it. thanks marty   andrew Moderator Username: andrew Post Number: 1069 Registered: 11-2001 Posted on Sunday, July 18, 2010 - 05:28 pm:        That is a 60HP Evinrude with tilt and trim, long shaft, 1985. See: E60TLCO and manuals here.   paul2627 New member Username: paul2627 Post Number: 1 Registered: 08-2010 Posted on Monday, August 16, 2010 - 04:21 pm:        hi can any 1 halp i have a evinrude 25hp and need to no the year serial number 206b62e model h2592 can sum 1 plz halp thanks   ludus New member Username: ludus Post Number: 1 Registered: 08-2010 Posted on Saturday, August 21, 2010 - 02:03 am:        Hi, We have an 20hp??? Evinrude, serial number: 206B63E B7274... Can you tell me the year of it please? Thank You   ludus New member Username: ludus Post Number: 2 Registered: 08-2010 Posted on Saturday, August 21, 2010 - 02:15 am:        Table:   steven rackliff Visitor Posted on Wednesday, August 25, 2010 - 03:02 pm:        have a 115 hp evinrude outboard but can't read the model number.I can read the CRD at the end. Any help to find the yr. of this motor?   Chris Rodriguez Visitor Posted on Thursday, September 09, 2010 - 03:25 pm:        I believe I have an evinrude 40hp engine but dont' know where on the moter to find the serial number or the model number so I can find the year. I can't find a plate like the one on the last post on here. can someone please help? thanks, Chris   Randy Wilson Visitor Posted on Tuesday, September 14, 2010 - 08:13 pm:        Hi, I am trying to find out what year, model, etc. this evinrude is. Below is a side shot picture and the Serial# 6202DJ_01528. Not sure where to look for the model#. Thanks.   91ezgoer New member Username: 91ezgoer Post Number: 1 Registered: 09-2010 Posted on Sunday, September 26, 2010 - 11:02 pm:        Hello i'm new to site, I was given an older johnson outboard motor, but i'm not sure what year,hp,the ID plate is missing. but i do have some numbers i've found the first one is on the cover it is 376920 the other number is on the cyl. 305369 also on the freeze plug i the the numbers are 1692879 they are real hard to read. i would like to restore this motor I would be greatful for any help. Thank You   phutchins New member Username: phutchins Post Number: 1 Registered: 10-2010 Posted on Thursday, October 07, 2010 - 08:26 am:        Hello - I am also new to the site and recently purchased an Evinrude 9.9 short shaft. The ID plate is missing but we did find G3009741 on the freeze plug and 08G01 189580 on the mount. Can you help us identify the model? Thanks.   fishengreen Member Username: fishengreen Post Number: 23 Registered: 01-2010 Posted on Thursday, October 07, 2010 - 10:30 am:        Hello Randy, that motor appears to be a 1972 6hp we have parts and manuals avalible here   fishengreen Member Username: fishengreen Post Number: 24 Registered: 01-2010 Posted on Thursday, October 07, 2010 - 10:37 am:        Hello Paul2627, that motor looks to be a 1955 25hp parts and manual's are avalible here   fishengreen Member Username: fishengreen Post Number: 25 Registered: 01-2010 Posted on Thursday, October 07, 2010 - 10:46 am:        Hello Steven, that motor appears to be a 1985 115hp parts and manuals avalible here   fishengreen Member Username: fishengreen Post Number: 26 Registered: 01-2010 Posted on Thursday, October 07, 2010 - 10:51 am:        Hello Chris, the ID tag should be on the transom bracket or possibly on the silver freeze plug.   ldanmartin Visitor Posted on Tuesday, October 19, 2010 - 07:46 pm:        I have a Evinrude Elto Outboard Motor. Made in Milwaukee. USA. A number on it is: 1253-04221. Any ideas what this is (Year, Model/Make, HP etc).   fishengreen Member Username: fishengreen Post Number: 27 Registered: 01-2010 Posted on Wednesday, October 20, 2010 - 08:43 am:        Hello Idanmartin, that number is not correct I suspect you are looking for a model number that will begin E ## flowed by letters.   fredtfudpucker New member Username: fredtfudpucker Post Number: 2 Registered: 09-2010 Posted on Wednesday, October 20, 2010 - 09:54 am:        HAVE LOCATED A 3HP JOHNSON MOD. JW-17 , SER # B24314. TRIED TO FIND IT ON VARIOUS WEB SIGHTS WITH NO SUCCESS. IT LOOKS GOOD AS FOR AS EXTERNAL WEAR AND TEAR GOES. TRYING TO FIND OUT THE YEAR IS AND BALL PARK VALUE. I HAVE A JW-10 NOW AND THINK IT MAY NEED A FRIEND. THE OWNER IS ASKING $400 FOR THE JW-17. AYY HELP WOULD BE APPRECIATED==THANKS PUT-PUT.}}}   fishengreen Member Username: fishengreen Post Number: 28 Registered: 01-2010 Posted on Wednesday, October 20, 2010 - 10:04 am:        Hello Fred, according to the Model number that is a 1961-1962 3hp. Parts and manual's avalible here!   LDANMARTIN Visitor Posted on Friday, October 22, 2010 - 01:01 pm:        Actually the boat motor number is: 4253-04221 Any idea what this Evinrude Elto is?   BOB WENZEL Visitor Posted on Monday, October 25, 2010 - 05:58 pm:        HI..i HAVE A 6HP EVINRUDE MODEL 6902M S/N E04475, CAN ANYONE TELL ME WHAT YEAR IT IS??? THANKS   fishengreen Member Username: fishengreen Post Number: 29 Registered: 01-2010 Posted on Tuesday, October 26, 2010 - 08:38 am:        Hello Bob, That looks to be a 6hp made in 1969 and we have Parts and Manuals   fishengreen Member Username: fishengreen Post Number: 30 Registered: 01-2010 Posted on Tuesday, October 26, 2010 - 08:48 am:        Hello Martin, That motor looks to be a 1.1hp made in 1938 we have Manuals   Lee Cornell Visitor Posted on Monday, November 01, 2010 - 01:00 pm:        I have a 1995 Evinrude, 15 HP, 2-stroke with Serial number: G3759513 I want to purchase a service manual, but apparently I need a model number. Can someone figure this out from the above information? THANKS! Lee.Cornell (at) mnsu.edu   angelman New member Username: angelman Post Number: 1 Registered: 11-2010 Posted on Wednesday, November 17, 2010 - 07:06 pm:        I have a johnson 48 spl. The serial # tag is unreadable. The freeze plug reads G373826. Any info would be appreciated. Thanks, Tom   edhanson New member Username: edhanson Post Number: 1 Registered: 11-2010 Posted on Saturday, November 20, 2010 - 11:09 am:        Hi, I am new to this site and have inherted this Evinrude 4hp outboard. I am trying to find out what year it is. I am also looking for a an external gas tank for it so I can try and fire it up. MOD. NO. E4BRHCDE SER.No. B0106487 OUTBOARD MARINE CORPORATION BELGIUM Thanks, _ed Photo info   fishengreen Advanced Member Username: fishengreen Post Number: 31 Registered: 01-2010 Posted on Monday, November 22, 2010 - 09:24 am:        Hello Edanson, that is a 1986 and we have Parts and Manuals here   15tollycraft New member Username: 15tollycraft Post Number: 1 Registered: 11-2010 Posted on Saturday, November 27, 2010 - 01:58 pm:        i'am trying to find the year of my outboard motor. model 40152b serial jo1542 40 hp evinrude electric start. thanks for any help you can give.   fishengreen Advanced Member Username: fishengreen Post Number: 32 Registered: 01-2010 Posted on Monday, November 29, 2010 - 11:03 am:        Hello 15tollycraft, That is a 1971 40 hp we have Parts and manuals   15tollycraft New member Username: 15tollycraft Post Number: 2 Registered: 11-2010 Posted on Tuesday, November 30, 2010 - 05:47 am:        thanks for the quick response fishengreen. 15tollycraft   RUSSELL LEWIS Visitor Posted on Wednesday, December 08, 2010 - 07:18 pm:        I have a alto light twin C-23544 boat motor what year and value.   nufreeotm New member Username: nufreeotm Post Number: 1 Registered: 01-2011 Posted on Sunday, January 02, 2011 - 01:58 pm:        I am looking to buy a 10 HP Evinrude outboard motor, don't know the year, but the model # is E10RE9C, serial # is R08541887. The choke mechanism is broken off the pullstem, so I could not get it started, any help would be greatly appreciated.   nufreeotm New member Username: nufreeotm Post Number: 2 Registered: 01-2011 Posted on Sunday, January 02, 2011 - 02:01 pm:        Should have included this, trying to find parts to change out the choke on the 9.9 Evinrude so I can get it to run, anyone know where I can buy a part for this, from above post. Thank you.   fishengreen Advanced Member Username: fishengreen Post Number: 33 Registered: 01-2010 Posted on Monday, January 03, 2011 - 10:37 am:        Hello Nufreeotm, I had a hard time finding based on your number but this is what i found. http://i735.photobucket.com/albums/ww359/ccasavant/99.png   David Oxford Visitor Posted on Sunday, January 09, 2011 - 04:17 pm:        I have a Model: E3RFNM and trying to figure out what year it is and any help will be greatly appreciated.   fishengreen Advanced Member Username: fishengreen Post Number: 34 Registered: 01-2010 Posted on Monday, January 10, 2011 - 02:27 pm:        Hello David, That looks to be a (E3R E NM) which is a 1992}   Randal Petty Visitor Posted on Thursday, January 13, 2011 - 11:48 am:        I have a gray Evinrude 115 and I need to know the year model. I have a picture of it but I can only e-mail it. I'm selling my boat and it would help if I knew the year of the motor. Let me know if anybody can help! Thanks!   fishengreen Advanced Member Username: fishengreen Post Number: 35 Registered: 01-2010 Posted on Thursday, January 13, 2011 - 11:51 am:        Can you find a model number??   Randal Petty Visitor Posted on Thursday, January 13, 2011 - 11:56 am:        Yes I can find one but it won't be until 3:30. I'll post the model number then. Thank you for your help   Randal Petty Visitor Posted on Thursday, January 13, 2011 - 11:58 am:        Could you tell from a picture of it?   fishengreen Advanced Member Username: fishengreen Post Number: 36 Registered: 01-2010 Posted on Thursday, January 13, 2011 - 12:03 pm:        Sadly not accurately but you can try and post one   bob barlow Visitor Posted on Friday, January 14, 2011 - 10:26 pm:        hi i have a 15hp evinrude o/b mod no AE15BACDE & ser no A0308000 could someone please tell me it's year model regard's bob   fishengreen Advanced Member Username: fishengreen Post Number: 37 Registered: 01-2010 Posted on Monday, January 17, 2011 - 09:11 am:        Hello Bob, I am having a hard time with hat number, could you please check the model number again?   Robert Barlow Visitor Posted on Monday, January 17, 2011 - 06:37 pm:        have rechecked that mod no AE15BACDE it is correct.i'am talking from Melbourne Australia, could the A at the start indicate an aussie build regards Bob.   fishengreen Advanced Member Username: fishengreen Post Number: 38 Registered: 01-2010 Posted on Tuesday, January 18, 2011 - 08:28 am:        Hello Robert, thank you for getting back to me I cannot find it in my software but believe it to be a AE15BACDE - 1986 15hp Evinrude   Butch Visitor Posted on Monday, February 07, 2011 - 04:03 pm:        Have evinrude motor # A125340. Have not been able to locate model #. Want to sell ,but need to find out what I have. Any advise on where to go?   tommoore Visitor Posted on Thursday, February 10, 2011 - 03:22 pm:        i just got a fastwine evinrude serial 18402d-e06485 can you tell me what year and model it is PL   roberte Visitor Posted on Friday, February 11, 2011 - 11:11 am:        I have an evinrude "sportsman" engine;serial #4425-17494.Curious what year this is.I have not found a model # is that under the engine case?thanks   fishengreen Advanced Member Username: fishengreen Post Number: 39 Registered: 01-2010 Posted on Friday, February 11, 2011 - 11:59 am:        Hello Robert, That looks to be a 1948-1951 1.5 hp and the model number is 4425   fishengreen Advanced Member Username: fishengreen Post Number: 40 Registered: 01-2010 Posted on Friday, February 11, 2011 - 11:59 am:        Hello Tommoore, that looks to be a 1964 18 hp   roberte Visitor Posted on Friday, February 11, 2011 - 08:26 pm:        Thank you fishengreen,any idea of value?.It still has compression,but the last time i ran it was around'83.Thanks for your help.bob   DCOS Visitor Posted on Friday, February 25, 2011 - 12:29 pm:        Have two old outboard motors recovered from an estate storage. 1955 Firestone 16hp serial #19551209. and a Evinrude serial #4371-34051. Anyone with more info and value please reply.   Lew Lewandowski Visitor Posted on Tuesday, March 08, 2011 - 10:48 am:        I am trying to get the year on my fathers Evinrude outboard.I do know it is a 15hp, electric start. Model# 15E 74S VIN # E3997930 Thanks for your help, send response to my e-mail   fishengreen Advanced Member Username: fishengreen Post Number: 41 Registered: 01-2010 Posted on Tuesday, March 08, 2011 - 02:50 pm:        Hello DCOS, The Evinrude looks to be a 1946 3.3 hp   fishengreen Advanced Member Username: fishengreen Post Number: 42 Registered: 01-2010 Posted on Tuesday, March 08, 2011 - 02:53 pm:        Hello Lew, according to that model number you have a 15 hp made in 1974 here is a link to http://www.marineengine.com/parts/johnson-evinrude-parts.php]Parts and http://www.marineengine.com/parts/johnson-evinrude-manuals.php?Year=1974&HP=15&M odel=15E74]Manuals   gary werner Visitor Posted on Monday, March 14, 2011 - 04:49 pm:        hi i have a old evenrude fisherman 5 1/2 hp 5524r-03657 trying to find out what year it is any help will do thanks}   fishengreen Advanced Member Username: fishengreen Post Number: 43 Registered: 01-2010 Posted on Tuesday, March 15, 2011 - 11:06 am:        Hello Gary, That looks to be a 1962 5.5 hp here are Parts and a Manual below http://www.marineengine.com/parts/johnson-evinrude-parts.php http://www.marineengine.com/parts/parts.php#manuals   gary werner Visitor Posted on Tuesday, March 15, 2011 - 04:54 pm:        thank you big help can someone tell me of value someone wants to buy   tcduttweiler Visitor Posted on Monday, March 21, 2011 - 05:48 pm:        I have an Evinrude Model # 4416 and serial # 19347. Can anyone tell me how old it is or anything about the motor?   dr_majski New member Username: dr_majski Post Number: 1 Registered: 03-2011 Posted on Tuesday, March 22, 2011 - 09:23 am:        PLEASE, I own Evinrude 50 hp 2 cyc. All I know is No of engine: G 1041991. If anybody know what year of manufacturing is, please write. Big hi from Croatia   fishengreen Advanced Member Username: fishengreen Post Number: 44 Registered: 01-2010 Posted on Tuesday, March 22, 2011 - 09:45 am:        Hello Tcduttweiler, from the looks of that model number you have a 1947 2 hp   wilkiedog New member Username: wilkiedog Post Number: 1 Registered: 03-2011 Posted on Wednesday, March 23, 2011 - 11:59 am:        evinrude motor model no. 15804B serial no. G-60831 could you tell me what year this is?   fishengreen Advanced Member Username: fishengreen Post Number: 45 Registered: 01-2010 Posted on Thursday, March 24, 2011 - 10:00 am:        Hello Wilkiedog, according to that model number you have a 1978 15 hp Here are Parts http://www.marineengine.com/parts/johnson-evinrude-parts.php?year=1978&hp=15&mod el=15804B and Manuals http://www.marineengine.com/parts/johnson-evinrude-manuals.php?Year=1978&HP=15&M odel=15804   dr_majski New member Username: dr_majski Post Number: 2 Registered: 03-2011 Posted on Thursday, March 24, 2011 - 03:22 pm:        I find Code No for Evinrude 50 hp. It is BE50BELCO. And serial No is G 1041991. Is that means that year of manufacturing is 1985? Thanks Siniša, Croatia   fishengreen Advanced Member Username: fishengreen Post Number: 46 Registered: 01-2010 Posted on Thursday, March 24, 2011 - 03:28 pm:        Hello Dr Majski, That is correct and here are links to Parts http://www.marineengine.com/parts/johnson-evinrude-parts.php?year=1985&hp=50&mod el=E50BELCOB and Manuals http://www.marineengine.com/parts/johnson-evinrude-manuals.php?Year=1985&HP=50&M odel=50BELCOB   dr_majski New member Username: dr_majski Post Number: 3 Registered: 03-2011 Posted on Thursday, March 24, 2011 - 03:38 pm:        Thanks a lot fishengreen. I need to to do small refreshing on my boat for riding on Danube. Thanks again,regards   terry1s New member Username: terry1s Post Number: 1 Registered: 04-2011 Posted on Tuesday, April 05, 2011 - 01:42 pm:        I have an evinrude motor 6039-07360 22.5 hp. Can someone give me the year and or model of the engine. Our yacht club is looking to sell this with the boat but really do not know what we have.   fishengreen Advanced Member Username: fishengreen Post Number: 47 Registered: 01-2010 Posted on Tuesday, April 05, 2011 - 01:56 pm:        Hello Terry1s that looks to be made between 1939 - 50   arcman13 New member Username: arcman13 Post Number: 1 Registered: 04-2011 Posted on Wednesday, April 06, 2011 - 09:36 pm:        I have a 35hp evinrude that i need a lower rebuild kit for.the model# is E35ECND.Is this motor a 1990?   randee Visitor Posted on Wednesday, April 06, 2011 - 09:46 pm:        I have an old boat motor. Tag has Model ED12, Serial number 1797627, Johnson Motor company. Can you help id this?   fishengreen Advanced Member Username: fishengreen Post Number: 48 Registered: 01-2010 Posted on Thursday, April 07, 2011 - 09:41 am:        Hello Arcman13, that looks to be a 1982 and here are some links to.. Parts http://www.marineengine.com/parts/johnson-evinrude-parts.php?year=1982&hp=35&mod el=E35ECND and Manuals http://www.marineengine.com/parts/johnson-evinrude-manuals.php?Year=1982&HP=35&M odel=35ECND   fishengreen Advanced Member Username: fishengreen Post Number: 49 Registered: 01-2010 Posted on Thursday, April 07, 2011 - 09:54 am:        Hello Randee, That I believe is a Cd-12 made in 1955 here are Parts http://www.marineengine.com/parts/vintage-evinrude-johnson/376397/catalog.html?http://www.marineengine.com/parts/vintage-evinrude-johnson/376397/37639700001.htm and Manuals http://www.marineengine.com/parts/johnson-evinrude-manuals.php?Year=1955&HP=5.5&Model=   Howard Manuel Visitor Posted on Saturday, April 23, 2011 - 12:03 pm:        I have an Evinrude 6hp Evinrude outboard motor. Model no:6805B Serial no:C7017118 I want to know what year it was made.   fishengreen Advanced Member Username: fishengreen Post Number: 50 Registered: 01-2010 Posted on Monday, April 25, 2011 - 09:29 am:        Hello Howard, according to the model number you have a 1978 6 hp. here are links to Parts http://www.marineengine.com/parts/johnson-evinrude-parts.php?year=1978&hp=6&mode l=6805B and Manuals http://www.marineengine.com/parts/johnson-evinrude-manuals.php?Year=1978&HP=6&Mo del=6805   deanna Visitor Posted on Saturday, April 30, 2011 - 06:17 pm:        I have an old Evinrude motor that I would like info on(year,etc) its a twin lightning serial #3018-05671   keithuk Member Username: keithuk Post Number: 19 Registered: 04-2009 Posted on Monday, May 02, 2011 - 08:15 am:        1956 evinrude lightwin 3hp   fishengreen Senior Member Username: fishengreen Post Number: 51 Registered: 01-2010 Posted on Monday, May 02, 2011 - 10:05 am:        Hello Deanna, that looks to be a 1956 here are parts http://www.marineengine.com/parts/vintage-evinrude-johnson/ITEM_2743/catalog.htm l?http://www.marineengine.com/parts/vintage-evinrude-johnson/ITEM_2743/ITEM_2743 00001.htm and Manuals http://www.marineengine.com/parts/parts.php#manuals   mike branham Visitor Posted on Wednesday, May 04, 2011 - 02:13 am:        Evinrude 6hp. Serial # 9514-10616. What year is this?   rob williams Visitor Posted on Sunday, May 08, 2011 - 03:02 am:        Can some one help me find the year modle of my outboard moter it is an Evinrude 115HP the modle number is F115FPISNF & the serial number is 04993349. }   fishengreen Senior Member Username: fishengreen Post Number: 52 Registered: 01-2010 Posted on Monday, May 09, 2011 - 02:27 pm:        Hello Mike, can you please double check the first 4 digits.   fishengreen Senior Member Username: fishengreen Post Number: 53 Registered: 01-2010 Posted on Monday, May 09, 2011 - 02:32 pm:        Hello Rob, that looks to be a 2002 here are parts and manuals http://www.marineengine.com/parts/johnson-evinrude-parts.php?year=2002&hp=115&mo del=E115FPLSNF http://www.marineengine.com/parts/johnson-evinrude-manuals.php?Year=2002&HP=115& Model=J115PLSNF   MarkBWild Visitor Posted on Tuesday, May 10, 2011 - 04:12 am:        I have an Evinrude 6 HP with model number 69B67E Does anyone know what year this one is?   C L Stone Visitor Posted on Monday, May 16, 2011 - 11:16 pm:        I have an Evinrude 7 1/2 HP with model #7612-20852 Can you tell me the year it was made?   houghy Visitor Posted on Tuesday, May 24, 2011 - 12:11 am:        i have an evinrude he20srleor and am wondering what year it is.can anyone help.it is the old blue motor   Richard Spinney Visitor Posted on Friday, May 27, 2011 - 05:31 pm:        I have a Evinrude Elton Ace # 4351-03687 What does this # tell us ?   poul nielsen Visitor Posted on Thursday, June 02, 2011 - 07:59 am:        i have a evinrude with the numbers 68b66b b 27550 can enyone tell me what model this is 6hp   fishengreen Senior Member Username: fishengreen Post Number: 55 Registered: 01-2010 Posted on Thursday, June 02, 2011 - 11:10 am:        Hello Richard, that is a 1940-41 1.8 hp   upstate Visitor Posted on Saturday, June 11, 2011 - 10:04 am:        I wa srecently given an old evinrude outboard Tag number 7516 23528. Can anyone give me any insight on this engine or direct me to a web site. Does it have any value?   bruce Senior Member Username: bruce Post Number: 265 Registered: 07-2002 Posted on Saturday, June 11, 2011 - 03:24 pm:        try AOMCI.org 1953-1954 era my guess.   ernie Senior Member Username: ernie Post Number: 1344 Registered: 01-2002 Posted on Saturday, June 11, 2011 - 08:48 pm:        1954 http://www.marineengine.com/parts/model_guide_pre80.html   Hawkss1 Visitor Posted on Monday, June 13, 2011 - 02:19 pm:        Can you tell me what year my Evinrude motor is? Serial #18102S-E02343 Hawk   Marlo Adkins Visitor Posted on Sunday, June 26, 2011 - 12:24 pm:        Have a 90 horsepower evinrude. The model# is wore off but the serial# is R 1803297(3) maybe. Cant really tell the last # but thats wat it looks like. Can you help plz. Thanx   T. Chad Johnson Visitor Posted on Tuesday, June 28, 2011 - 09:04 pm:        can someone give me the year/hp/shaft length specs on the following serial/model numbers... 18402D E08595 and will the items in the following pictures fit above motor...   daifish New member Username: daifish Post Number: 2 Registered: 07-2011 Posted on Monday, July 11, 2011 - 03:55 pm:        hi ihave just bought through a dealer a 70 hp 2004 evenrude engine or so im told there again im told evenrude didnt make a 2004 70 hp that year can you help me please all i have is a serial number n484410thanks   B Moore Visitor Posted on Thursday, July 14, 2011 - 10:51 am:        Have antique evinrude outboard serial # A125340 also # emboised on transom clamp R19B-1 (not sure what this is) Can anyone help on year & hp ??   John Stratton Visitor Posted on Sunday, July 24, 2011 - 10:37 pm:        I bought a 1993 Evinrude 60 hp 2 stroke outboard motor. Only part of the model number and serial numbers are there. I checked for silver plug, i checked motor over ..can not find any other numbers. I need the correct numbers as I had a dealer order me parts but they are wrong, These are the numbers I got Model # E 60TLE Serial # G 03564 Please help....Thanks   crh53 New member Username: crh53 Post Number: 1 Registered: 07-2011 Posted on Monday, July 25, 2011 - 10:35 am:        I have an Evinrude 50hp serial# C1451857 and model# CE50BECUD and I was wondering if anyone could tell me what year this motor is. Thanks   kristoleo New member Username: kristoleo Post Number: 1 Registered: 07-2011 Posted on Friday, July 29, 2011 - 08:28 pm:        I bought a Evinrude 6hp 2 stroke outboard motor, S/N#:B8898818, Model#:E6REMM Please help me which year or where i can find this operator/user manual. Thanks   ernie Senior Member Username: ernie Post Number: 1383 Registered: 01-2002 Posted on Saturday, July 30, 2011 - 02:46 pm:        Please verify your model number E=Evinrude 6=6 HP R=rope Start with tiller steering E=9 first digit of model year M ? M ? With this info It most likely is a 90 something You can get manuals and parts at www.marineengine.com which is the host site for Old Marine Engine dot com Hope this helps Ernie   les49 New member Username: les49 Post Number: 1 Registered: 07-2011 Posted on Sunday, July 31, 2011 - 10:35 am:        Model 60173S -- The ID tag says it's a 50hp but the model# indicates it's a 60hp. Which is the right answer and I guess the "S" is for the run? Thank you in advance Les   Twillingate Visitor Posted on Tuesday, August 02, 2011 - 05:47 pm:        I have an Evinrude Model 35R78R with the serial Number C8023806 and would like to know the year of the motor.   crh53 New member Username: crh53 Post Number: 2 Registered: 07-2011 Posted on Thursday, August 04, 2011 - 09:49 am:        I had several emails about other motors but none about the one I posted below any help would be greatly appreciated. I have an Evinrude 50hp serial# C1451857 and model# CE50BECUD and I was wondering if anyone could tell me what year this motor is.   kljola New member Username: kljola Post Number: 1 Registered: 08-2011 Posted on Tuesday, August 16, 2011 - 02:16 am:        I have an Evinrude outboard with serial 15802MB4455. Can anyone tell me Year? Model? jorma   kasey_meyer New member Username: kasey_meyer Post Number: 1 Registered: 08-2011 Posted on Friday, August 26, 2011 - 02:45 pm:        My father in law has an old evinrude motor he believes is from the 30s. serial# is 4227-00343 and the model#is 101979. can anyone tell me if there is any value to this and if the year is correct. thank you.   Marc Hawthorn Visitor Posted on Monday, September 05, 2011 - 08:25 pm:        I have a 200hp year 2000. model E200FPXSSC. I know the FP means its a FICHT power trim/tilt, but this motor has carbs with the carb bowls. Some model codes have FP meaning its a commercial engine, what does that mean. It does not have the components to make it a FICHT. Any other way I can find out what motor I exactly have   bruce Senior Member Username: bruce Post Number: 283 Registered: 07-2002 Posted on Monday, September 05, 2011 - 09:29 pm:        Marc, Try posting at marineengine.com or call American Outboard in Maryland. Your Evinrude is about fifty to a hundred years newer than this forums primary subject matter.   jan Member Username: jan Post Number: 14 Registered: 08-2011 Posted on Monday, September 12, 2011 - 05:23 pm:        I typed in the number on the net and the whole envinrude year of manufacture website came up on google!   struggles New member Username: struggles Post Number: 2 Registered: 09-2011 Posted on Saturday, September 24, 2011 - 03:27 pm:        like alot of others i am having trouble indentifying the year and hp of my evinrude motor. s/n 15012-40850   andrew Moderator Username: andrew Post Number: 1129 Registered: 11-2001 Posted on Monday, September 26, 2011 - 07:10 am:        Struggles, That is a 15HP from 1953-54 click here   Lorne King Visitor Posted on Monday, September 26, 2011 - 06:57 pm:        I have a 10 hp Evinrude with the serial number of 10022B50045 Can you tell me the age of this motor and any other pertinent information. Thanks   foxtail1 New member Username: foxtail1 Post Number: 1 Registered: 10-2011 Posted on Sunday, October 02, 2011 - 01:52 pm:        Hello I have a Evenrude...E14025 with 67 02 S on the plate. I assume it was built in 67 and on the cover it has the number 6 and I assume that it is a 6 HP motor. Thanks Ed   chuck roberson Visitor Posted on Sunday, October 02, 2011 - 03:13 pm:        i have a evinrude motot serail num 1501231794 trying to find out year &model &hp   ernie Senior Member Username: ernie Post Number: 1447 Registered: 01-2002 Posted on Sunday, October 02, 2011 - 06:18 pm:        Look through this entire post. All the info you need to find out what you have is in various links Hope this helps Ernie   softwireman Visitor Posted on Friday, October 07, 2011 - 02:02 pm:        I bought this motor from a guy near Lake Fork for $25. After getting home realized there is no serial number plate. I need to replace the impeller and need the year it was made. Freeze plug has the following on it: 18602C on top and E08984 on bottom. Can't find any other numbers on motor anywhere. Any help is appreciated and thanks in advance. Glenn   andrew Moderator Username: andrew Post Number: 1133 Registered: 11-2001 Posted on Friday, October 07, 2011 - 07:18 pm:        18602 is a 1966 18HP click here for the parts diagram on the MarineEngine.com site.   neal Visitor Posted on Thursday, October 13, 2011 - 07:32 pm:        I have a old evinrude the numbers are 25924-03700 i would like to know the year of it   bruce Senior Member Username: bruce Post Number: 288 Registered: 07-2002 Posted on Thursday, October 13, 2011 - 07:50 pm:        Neal, Go to marineengine.com There's serial number charts that date outboards by manufacturer. Looks like it's a 1956 30hp ??   neal Visitor Posted on Thursday, October 13, 2011 - 08:01 pm:        thanks bruce i thought it was around that year   mark burton moore Visitor Posted on Sunday, October 16, 2011 - 10:56 am:        i bought 2 X 1hp, i believe, but no idea of year please help id them. B007084 1802c B0088295[S] 1802S many thanks   Aaron Duntley Visitor Posted on Sunday, October 16, 2011 - 08:31 pm:        Hi I have a antique evinrude outboard motor that I am tring to find out the date and hp on. The only two sets of numbers I could find are 1N381 on the plate and 110565 casted. The only words I could make out on the tank are " sport wi--" it is a twin cylinder and it has champion spark plug # 0com in it?   Mark Miller Visitor Posted on Wednesday, October 19, 2011 - 05:54 pm:        I have an Evinrude Elto Model #4296-01816. We beleive it to be a 1939. Do you have an educated guess on what we can sell this for. Motor looks to be complete and in good shape   hterkels New member Username: hterkels Post Number: 1 Registered: 10-2011 Posted on Monday, October 31, 2011 - 06:05 am:        Anyone that can tell year and horspower on this   Jim Jones Visitor Posted on Saturday, December 03, 2011 - 09:18 pm:        Hello, My name is Jim I purchased a Evinrude 40 horse power model # 35521 serial #02463 can you tell me what year this motor is ...I know I will need a new prop, and other information on this motor. Thanks   garrett1 New member Username: garrett1 Post Number: 1 Registered: 12-2011 Posted on Sunday, December 04, 2011 - 11:28 pm:        im looking for the year for my evinrude 15 hp model number 15404s. i need a cylinder head in particular. unless theres another way to fix the hole that spark plug goes in. its stripped out. thanks   Mark Meissgeier Visitor Posted on Saturday, January 07, 2012 - 04:55 pm:        I just bought a 9.9 evinrude outboard motor. Model # E10RCSE Serial # E000586 Can anyone tell me what year this is and where to find a manual and /or parts?   nhrafastford New member Username: nhrafastford Post Number: 1 Registered: 01-2012 Posted on Sunday, January 08, 2012 - 12:15 pm:        I recently aquired 2 antique outboards & am trying to ID both prior to listing them for sale - 1 is a Evinrude elto 4266 / 10714 & the other is a old Johnson a little larger than the elto but I can't find any ID plate on it ?? Any & all info will a GREAT help ?? THANKS Doug Wesler SouthWest Michigan   ktownhero New member Username: ktownhero Post Number: 1 Registered: 01-2012 Posted on Friday, January 27, 2012 - 06:58 pm:        I have a motor that has no ID plates of any kind so I was wondering if soemone here may be able to help me. I was told you could tell by the number on the freeze plug. That number is J3584037. Any info at all will be appreciated. Thanks   andrew Moderator Username: andrew Post Number: 1145 Registered: 11-2001 Posted on Monday, January 30, 2012 - 05:08 pm:        Jim Jones: 35521 is a 40HP from 1960. Garrett1: 15404S is a 15HP from 1970 The cylinder head is available here.   andrew Moderator Username: andrew Post Number: 1146 Registered: 11-2001 Posted on Monday, January 30, 2012 - 05:08 pm:        Mark Meissgeier: Model E10RCSE is 1980. See here for all drawings and available parts. See here for manuals. nhrafastford: 4266 is a 1.1HP from 1938. You could post photos of both on the MarineEngine.com board and I'm sure someone could help. ktownhero: Sometimes the model number is stamped into the freeze plug but J3584037 does seem to be a valid number. You could post photos of the engine on the MarineEngine.com board. Thanks.   perley lelair Visitor Posted on Saturday, February 11, 2012 - 04:26 pm:        andrew I have a 50hp evinrude outboard and have no idea what year it is model number is E50TLFOD the serial G03891801 any info will be greatly appreciated thanks   Max Hartley Visitor Posted on Monday, February 27, 2012 - 08:20 pm:        Just bought an old Jon boat with a 40hp evinrude on it but can't seem to figure out the year. The model number is E40TEESR, it's a jet drive motor and it says Evinrude VRO on the case. Any help? I've tried the decoder above, SR at the end means 04, but I've seen people take from the 2nd and 3rd from the last meaning it would be ES 1990..   masterg45 New member Username: masterg45 Post Number: 1 Registered: 03-2012 Posted on Sunday, March 04, 2012 - 01:28 am:        Just picked up an Evinrude with the tag reading 4206S-E04017. Help with the year so to help with ordeering parts. Also got a Johnson 6hp J2956363 Model CD-25R Believe to be around 1960 any help there? Thanks Dale   ernie Senior Member Username: ernie Post Number: 1474 Registered: 01-2002 Posted on Sunday, March 04, 2012 - 07:30 am:        If you start from the top in this thread there are links to all of the info you need Hope this helps Ernie   Edward Visitor Posted on Monday, March 12, 2012 - 01:19 pm:        Hello All Any help will be greatly appreciated in determining the year and horse power of an old Evinrude outboard (2 cylinder)s/n 5522-09747. I need this info for parts and to make sure it under the maximum horse power permitted for insurance purposes. Thankyou   Tom Bard Visitor Posted on Tuesday, March 13, 2012 - 04:12 pm:        Anyone, I have an Elto circa 1940. Tag number is 4351-02819. Please help confirm exact model name, date of manufacture, horsepower and any specifications related to point gap, max rpm, oil/gas mixture to use, etc. Runs good---anyone ever sold one? What general value could it have? Might sell, if there is any interest. Thanks for your help.   Charle Burger Visitor Posted on Tuesday, March 20, 2012 - 11:27 am:        The two numbers I have on this recently purchased Katrina surviving motor are J8RCSS and E5212397. The INTRODUCES code confuses me because the letter C could be used in two locations and the code is only 6 not 8 didgits. Any idea of year, size, and rhich repair manual to get? Thanks Charle   bob pillsbury Visitor Posted on Wednesday, March 28, 2012 - 09:18 pm:        Just purchased an Evinrude Lark 111 motor Which I am told is a 40HP with the serial #09799 and model #95524. Would like to know what year it is so I can purchase parts and a manual.Looked in the chart and could not find it. Thanks Bob   opor New member Username: opor Post Number: 1 Registered: 04-2012 Posted on Wednesday, April 18, 2012 - 06:34 pm:        evinrude 1973 50 hp no spark to plugs tryed all, need help, model 50373r serial e0003015 i need a wireing diagram, please help, [email protected] thank you   Sandra Marie Visitor Posted on Thursday, April 26, 2012 - 07:10 am:        Would like to find out what year this motor is...Please 2 Hp Evinrude Model # CJCOCEB Serial # C8247229 Would also know where we could gets parts for it. Thank You   ulian stoikov Visitor Posted on Wednesday, May 02, 2012 - 04:35 am:        Would like to find out what year this motor is. 25HP Evinrude model BE25BELCOC Serial 006950   Newboatguyhelp Visitor Posted on Wednesday, May 09, 2012 - 08:25 pm:        I have an evinrude motor just got it running but need to get water pump and the rotor thing. The serial number that is on the engine is 18102S-E07799 can some tell me what hp and year this may be thank you much.   LarryMachan Visitor Posted on Friday, May 18, 2012 - 11:28 am:        I have an evenrude E90TLCCA serial#R-18089-79. I am wondering what year this motor is!   Bernard Murray Visitor Posted on Tuesday, May 22, 2012 - 11:29 am:        I have a Evinrude 50 hp outboard motor, Model no. E50RNL IC, Serial no. G03659210, Evinrude corporation USA.... Could anyone help me find the year? I checked this info and its right, but I can't make out what year it is from your previous comments to other users, its an electric start, please help, Bernard.   Hidalgo Visitor Posted on Thursday, May 24, 2012 - 09:10 pm:        tenho um (01)motor evinrude 25 hp ,model 25602E ,serial E0002093, gostaria de saber o ano. desde ja obrigado!   rgzyl Visitor Posted on Friday, May 25, 2012 - 02:53 pm:        Need diaphragm for oil lift pump 150hp. Evinrude 2000 yr. or where to get material for make one of the diaphragm, mat'l thicknes is 1/64",and the Dim. is 2 1/2" pls.call with any info at 941.809-6969   pyc New member Username: pyc Post Number: 1 Registered: 05-2012 Posted on Monday, May 28, 2012 - 04:33 pm:        }I have an Evinrude Elto 4253-00367.Can you tell me the year of the motor....Does it have any value?   Tyler Wessing Visitor Posted on Wednesday, May 30, 2012 - 10:03 pm:        I have a single cylinder Champion motor, and need the model and year for it, i have the serial number: 171138 and above that is a spec number:140. Any information would be greatly appreciated   Devin Tennant Visitor Posted on Thursday, June 07, 2012 - 08:09 pm:        Hi there, My grandfather recently passed away and I found this old evinrude lightwin in the barn hanging from a rafter.. i imagine it hasnt ran in over 30 40 years, still rolls over though. Not sure what the size is or the year, can someone help me out? serial number is 3012-63438   gvande New member Username: gvande Post Number: 1 Registered: 06-2012 Posted on Sunday, June 10, 2012 - 12:43 am:        dad found a motor for my boat but forgot to ask long or short shaft. model 35903A and serial E0001706. i figured out its a 1979 Evinrude 35 hp but cant figure out shaft length from it...help please   ernie Senior Member Username: ernie Post Number: 1504 Registered: 01-2002 Posted on Sunday, June 10, 2012 - 09:31 am:        It appears that there were 2 versions of long shaft. Factory and dealer See attached pics found somewhere on the net. Thanks to whomever took them. Note the distance from the lower motor mount to the cavitation plate. When your motor is on the boat the cavitation plate should be slightly below the bottom of the transom. If you have a short transom and a long motor the cavitation plate will be aproximatly 5 inches below the bottom of the transom Short Shaft Dealer installed long shaft Factory long shaft   gvande New member Username: gvande Post Number: 2 Registered: 06-2012 Posted on Sunday, June 10, 2012 - 11:09 am:        I just found another site that said if the model number ends in a 2 its short anda 3 means long?   tmiseaolcom New member Username: tmiseaolcom Post Number: 1 Registered: 06-2012 Posted on Thursday, June 21, 2012 - 01:55 pm:        Bought a 1981 Aquasport Center Console. Was told the outboard is an Evinrude 225 hp. There is no serial number, etc...to determine the year. The owner said it was anywhere from a 1984-1987. I traced the numbers on the heads which these heads were used on 1988, 1990, 1991, and 1992 models. Can anyone assist me in trying to pinpoint the exact year of this motor?   bruce Senior Member Username: bruce Post Number: 305 Registered: 07-2002 Posted on Thursday, June 21, 2012 - 08:21 pm:        Terry, Try MARINEENGINE.COM or americanoutboard.com   mack from scotland Visitor Posted on Monday, June 25, 2012 - 03:38 pm:        hi there, seems to be a common thread but... I have just been gifted a Evinrude sportwin 9.5 for my dads old boat, just popped the flywheel off and the points/magnets and condensers look gone, there is only a limited jolt from the leads (when a screwdiver is held in the plug lead cap with your hand it is just a tickle) tried new plugs but no spark.... I need to replace the electrics but,, wait for it! i dont know what year it is, or where best to buy parts. Engine number is co557217. any help would be appreciated. oh! and I live on the isle of skye, Scotland, so it will have to be uk internet parts, i would think?   jb_castagnos Senior Member Username: jb_castagnos Post Number: 704 Registered: 07-2002 Posted on Monday, June 25, 2012 - 06:33 pm:        Try cleaning the points with fine sandpaper, if there's corrosion on the edges of the contacts be sure to buff this off as it will soon migrate back across the contacts. Clean with contact cleaner and try for spark. The OMC points, condensers, and coils were standard for many years.   mack from scotland Visitor Posted on Tuesday, June 26, 2012 - 12:30 pm:        JB many thanks for that.. I did clean the points with fine paper which produced the weak spark. I will still need the coils I am sure as they look blown/swollen i will try and order a generic one if you think that they are the same throughout the years. many thanks for the help mack   ann9895 New member Username: ann9895 Post Number: 2 Registered: 07-2012 Posted on Sunday, July 15, 2012 - 09:25 pm:        I have a Johnson Evinrude outboard with a partial model # J---SLCER and a serial # R06225997. Can anyone help me figure out what year and hp this is   Kevin Ferris Visitor Posted on Friday, July 27, 2012 - 10:11 am:        hi wondering which year this vin is 206B62D C78655. 20hp evinrude thanks.   jerry ford Visitor Posted on Sunday, July 29, 2012 - 10:50 am:        hi ..i have an old evinrude motor, and dont have much info on it. all i can find is the serial number of..3034-07846 and it says, lightwin on the side..any info would b great.!! also, was told it runs, would like to know, if there is any value to it, or is it junk..!! lol..thanks!!!!   martin Austria Visitor Posted on Friday, August 10, 2012 - 12:01 pm:        Hello, can somebody tell me the year and may be other details of this enginge p.e. which petrol must be used Envinrude I found two numbers on it E60ECNM and B 06250 I would be glad if somebody can help me   Christophe Visitor Posted on Saturday, August 18, 2012 - 09:39 am:        Hello, I bought an Evinrude Big Twin without noticing the name plate was absent. The seller told me it is a 40 hp but I have nothing to corroborate it and would also like to know the year model. Many thanks for directions   brucefuller Visitor Posted on Saturday, August 25, 2012 - 06:25 pm:        I have a old Evinrude motor the patent stamp dates show from 1911 to Jan. 1924, this is the number NX10165. Can you tell me what year this is?   solarrog Senior Member Username: solarrog Post Number: 526 Registered: 03-2002 Posted on Saturday, August 25, 2012 - 07:37 pm:        1926 sport twin   John Silvernail Visitor Posted on Thursday, August 30, 2012 - 01:48 pm:        I have a Evinrude Fastwin Serial#18302E-E09460 need to find out what year it is. The motor is in great shape and still runs. Does it have some value?   dale may Visitor Posted on Sunday, September 02, 2012 - 06:19 pm:        I have an older evinrude outboard, the only number I can find is serial no.3012-44509 can anyone please tell me what year and horse power it is----thanks   dewey w Visitor Posted on Monday, September 10, 2012 - 06:34 pm:        i have a 70 hp evinrude model#e70tleor serial# g03747779 what year is it and how do u fix tilt and trim ?   Jeffrey Banks Visitor Posted on Thursday, September 13, 2012 - 09:29 pm:        I have an outboard, SE 25 RPF, serial no. G03922647, USA. Only one id plate on shaft. Could you tell me the year. R, rope start, PF no idea. Should it have a second id plate and what would be on it. What is the best fuel/oil mix. It can start in gear, ouch, should this happen or is there something broken. Thank you.   Loni Visitor Posted on Sunday, September 16, 2012 - 08:28 pm:        I have the numbers 10rl76h & e44022466 on a round stamp on the top of the motor. I know nothing about motors can anyone tell me what make, year, HP and etc. Thank you for your time   ROGER J Visitor Posted on Monday, October 01, 2012 - 04:17 pm:        HAVE OLD EVINRUDE OUTBOARD SERIAL A1506 NEED INFO   solarrog Senior Member Username: solarrog Post Number: 528 Registered: 03-2002 Posted on Monday, October 01, 2012 - 10:23 pm:        Are you sure about the serial number? My list shows the A model starting in 1915 with serial number #A3000 to #3999 Is your motor a single or twin? does it have a skeg on the very bottom of the lower unit? did you miss a digit? Roger   roger j Visitor Posted on Tuesday, October 02, 2012 - 06:27 pm:        my eyes not so good it is R 1506 2 cyl   solarrog Senior Member Username: solarrog Post Number: 529 Registered: 03-2002 Posted on Tuesday, October 02, 2012 - 10:41 pm:        The R model shows dates in the 1927 time frame 4 hp fast twin. Serial numbers are not listed.   David Nelson Visitor Posted on Monday, October 15, 2012 - 02:06 pm:        I have lightwin model 3402R serial B24149 year and HP ?   Rob Johns Visitor Posted on Monday, October 22, 2012 - 07:28 am:        Have 6 hp Evinrude Model 67B 67M Ser # A315818. Cannot locate this model reference anyplace to ID the year. Any help appreciated.   Lee Schofield Visitor Posted on Monday, November 05, 2012 - 05:35 pm:        Hi, I have just purchased a rib with 25 HP Evinrude engine powering it. I would like to buy a manual but have no idea of the age. I have the serial number which is 258B62CB15136. I am hoping that somebody may be able to help me out. Thanks   ernie Senior Member Username: ernie Post Number: 1585 Registered: 01-2002 Posted on Monday, November 05, 2012 - 06:57 pm:        Your best bet is the Antique Outboard Club at www.aomci.org Hope this helps Ernie   Lee Schofield Visitor Posted on Tuesday, November 06, 2012 - 01:26 pm:        thanks ernie, much appreciated.lee   John J. Smith Visitor Posted on Wednesday, December 05, 2012 - 09:57 pm:        I HAVE AN EVINRUDE 7.5 HP FLEETWIN I HAVE FOUND TWO SETS OF NUMBERS NOT SURE IF ONE IS A SERIAL OR NOT. I'M TRYING TO DETERMINE THE YEAR OF UNIT. 1ST SET 277555 2ND SET 752716668. CAN ANY ONE TELL THE YEAR OF MFG. JJ   mdmedic New member Username: mdmedic Post Number: 1 Registered: 01-2013 Posted on Tuesday, January 22, 2013 - 05:32 pm:        I have a 18 HP Evinrude motor . Serial # 18902-02715. Can you tell me what year it is and model?The engine is not froze up but the pull rope seems to be stuck to where you can not start the motor.Can anyone assist me or lead me to a service or repair manual to fix the problem?   timerset New member Username: timerset Post Number: 1 Registered: 02-2013 Posted on Thursday, February 14, 2013 - 07:19 am:        old EVINRUDE motor serial number : H9409538 need info thx.   martin Austria Visitor Posted on Wednesday, March 06, 2013 - 09:52 am:        Hello, I am from Austria. I would be glad if somebody could tell me the year and may be other details of this enginge p.e. which petrol must be used Evinrude I found two numbers on it E60ECNM and B 06250 I would be glad if somebody can help me and say thank you   kameron sheward Visitor Posted on Sunday, March 10, 2013 - 10:02 pm:        I am looking for some information. I have an old evinrude outboard that has a serial number of 15024-14848. Im looking to see the year and hp for this motor. Are parts still available and what would a motor of its age be worth if I was to buy it off an individual   redfox89 New member Username: redfox89 Post Number: 1 Registered: 03-2013 Posted on Thursday, March 14, 2013 - 01:41 am:        Hi I just picked up an Evinrude 9.9 motor and cant seem to find out the year. If anyone can help that would make my day. The Model number is E1CRCTC   ben gainer Visitor Posted on Monday, April 29, 2013 - 10:06 am:        hi I have a evinrude/johson model 9122r serial Jo2268 im assuming its a 1971 9.5 that wont run inless the choke is pulled we had the carb rebuilt but still runs the same any suggestions   Benson Visitor Posted on Monday, April 29, 2013 - 02:59 pm:        hi can please someone tell me what year for this evinrude please ,here is the model number ...65373R   Erin Clark Visitor Posted on Tuesday, May 21, 2013 - 03:47 pm:        I have an Evinrude Lark V. Model Number 1113519 and Serial Number 3D2. Can anyone tell me what year this is?   Bob McCall Visitor Posted on Sunday, May 26, 2013 - 05:39 pm:        I have antique evinrude motor with a model #A101780 can someone tell me the year and maybe what it is worth? motor is stuck but seems to be all there.   brenteno Visitor Posted on Monday, May 27, 2013 - 03:23 pm:        I have an evinrude motor model 6502m-e10240 can someone the me what year it is and were it was made and how much its worth? It runs great!   Stephen Smith Visitor Posted on Sunday, June 02, 2013 - 06:09 pm:        I just bought a boat and it came with a evinrude angler 5hp motor. The serial number for it is: 55025-E05869. Could somebody please tell me what year it is? For the gentlemen I bought it from said he couldn't get it to run. He actually pulled the pull rope nearly the whole wy out.   circle141 New member Username: circle141 Post Number: 1 Registered: 06-2013 Posted on Tuesday, June 04, 2013 - 08:32 pm:        I have a evinrude model #e8srledd, can any one tell me the year and HP   glorpious New member Username: glorpious Post Number: 1 Registered: 06-2013 Posted on Wednesday, June 05, 2013 - 06:41 pm:        Evinrude 6602M-E13403 This number is the only numer I can find. It's on a black and silver metalic plate located near the mounting bracket. Any information on this motor would be greatly appreciated. Thanks in advance.   dean2988 New member Username: dean2988 Post Number: 1 Registered: 06-2013 Posted on Tuesday, June 11, 2013 - 05:32 am:        I have 20hp evinrude with serial# 205B63BC87040. Looking for the yr and any info you may have on this motor. Thanks.   Aaron aaron Visitor Posted on Sunday, June 16, 2013 - 09:49 am:        Hey i just picked up an Evinrude outboard i think its pre 1980s because i cant find a way to decode the model and serial numbers, Im hoping someone can help me with any info on the beast MODEL# 9023C SERIAL# 54596 Any help will be much appreciated.   hunngun9 New member Username: hunngun9 Post Number: 1 Registered: 08-2013 Posted on Monday, August 19, 2013 - 11:40 am:        YES I HAVE A EVINRUDE SPORTWIN CAN U TELL ME THE YEAR MODEL # AND H.P THE ONLY #'S I SEE R 4423-04533 THANK U   michaelknapp New member Username: michaelknapp Post Number: 1 Registered: 10-2013 Posted on Sunday, October 06, 2013 - 06:58 pm:        I have a 85hp evinrude electric shift, model 85193A. my control box is bad, does anyone know where I can find a replacement one.   Chris Sjoblom. Visitor Posted on Sunday, June 01, 2014 - 11:42 am:        I have an Evinrude Javelin 30 that I cannot find any number plate on. It is a dark red/maroon,burgundy color. Could someone tell me where exactly the number plate should be? It's not on the middle section of the motor where the online dating guide I used told me it should be. Also, can someone give me a range of possible years based on the color, 30hp size, and Javelin name? I have attached some photos in case they can help. Any assistance would be much appreciated.   bryce marohn Visitor Posted on Thursday, June 19, 2014 - 08:24 pm:        Trying to figure out year of 70 horse evinrude 70573E J001262   Steve Reid Visitor Posted on Friday, June 27, 2014 - 06:59 pm:        I have a old evinerude engine and I would like to know the year and hp the # I have found are 15922 50165 Any info would be appreciated thanks Steve   dawnsglow New member Username: dawnsglow Post Number: 1 Registered: 07-2014 Posted on Friday, July 04, 2014 - 05:43 pm:        Hi, I am just starting to collect old outboard motors, I have my forst one. It is an Evinrud. Here is the serial number, 3012 51814, I have read your posts and still dont understand how to figure the year and horsepower from the serial number. can you help?   mike mooney Visitor Posted on Monday, July 14, 2014 - 08:06 pm:        i have an old evinrude 4 cyl.I need to know what size and year it was made.The numbers on the motor are 4404 70957.   Prodigal Visitor Posted on Sunday, September 14, 2014 - 04:13 pm:        I have a 45 hp Evinrude purchased in the late 80's The number on the silver plug on the flywheel is C2467278. Can the year and model be determined by this info?   didier blanquart Visitor Posted on Sunday, September 28, 2014 - 05:41 am:        I have a 4hp 2 stroke EVINRUDE Mod no: BE4BREIA Ser no: B 08847405 Belgium. I need to find out the year and a manual book on it.. many thanks from Austalia Perth.   didier blanquart Visitor Posted on Sunday, September 28, 2014 - 05:59 am:        AWESOME found it on you webside oldmarineengine.com used your codes and came up with 1991. cool all I need is a book on it..   dodgeram0711 New member Username: dodgeram0711 Post Number: 1 Registered: 04-2015 Posted on Sunday, April 19, 2015 - 10:21 am:        I have a evinrude 40hp I am trying to find the year ofit. Can anyone help me thanks. Model:40153G serial:c55166.   bruce Senior Member Username: bruce Post Number: 488 Registered: 07-2002 Posted on Sunday, April 19, 2015 - 10:54 am:        Try posting to marineengine.com for contemporary information of the sort you are seeking. This site is dedicated primarily to century old inboard marine engines . Take note of the posted site logo .   g0une New member Username: g0une Post Number: 1 Registered: 05-2015 Posted on Sunday, May 10, 2015 - 01:13 pm:        Hi i have an Evinrude 35hp outboard motor and wish to find out details from my model/serial numbers. Model number 358B62R Serial number B5738 Regards John   bruce Senior Member Username: bruce Post Number: 494 Registered: 07-2002 Posted on Monday, May 11, 2015 - 08:26 am:        John, Place your Evinrude Model Number in Google for a myriad of information.   Al Waal Visitor Posted on Monday, August 31, 2015 - 02:14 pm:        I have an Elto Light Twin w/ motor # C 24751. Any idea how I can determine vintage?   manlyjack New member Username: manlyjack Post Number: 1 Registered: 09-2015 Posted on Saturday, September 26, 2015 - 05:23 am:        Hi there I have an older style Evinrude outboard, The Model number is 6904E and the Serial Number is A345331. Can anyone please tell me what year and HP this engine is. Many Thanks   garyevers Visitor Posted on Monday, May 23, 2016 - 01:21 pm:        I have an Evinrude Fastwin, serial #18502S-E12032. The only other number I see anywhere is 804761 on a plug. Any idea on model number or year would be helpful.   David Evanson Visitor Posted on Friday, June 03, 2016 - 02:19 pm:        garyevers, your fastwin should be a 1965, see: http://www.marineengine.com/manuals/evinrude/   Jerry rubin Visitor Posted on Monday, June 06, 2016 - 10:57 am:        I have an evinrude serial number 18402D-E02698 trying to find any info on it thanks   Shawn Shulenburg Visitor Posted on Wednesday, June 22, 2016 - 11:13 am:        I have an evinrude 1975 v4, I think it is a 135 hiw do it tell, the I'd tag on the bracket is gone and the freeze plug is to corroded to read anymore.   William Johnston Visitor Posted on Friday, January 06, 2017 - 04:16 am:        Can someone help me find out what type and year my Evinrude is? Serial number is 4B36D B12377   Thomas Nesbitt Visitor Posted on Sunday, January 22, 2017 - 03:02 am:        I've got an old Evinrude motor it's missing the cover. Can you help me to find out what size the motor is and how to get parts to repair it with this serial number 7524-03573 Thanks for any help.   ernie Senior Member Username: ernie Post Number: 2362 Registered: 01-2002 Posted on Sunday, January 22, 2017 - 02:51 pm:        1958 7 and a half HP Aomci.org for better info as we here are pretty much antique inboards Also Google Doug Penn Outboard motor parts Hope this helps Ernie   admin Board Administrator Username: admin Post Number: 47 Registered: 07-2001 Posted on Sunday, January 22, 2017 - 03:11 pm:        I hadn't noticed these before but starting with the June question from 2016: Jerry rubin: 1964 Evinrude 18402 18hp. See link for parts drawings and available parts. Shawn Shulenburg: You can see the drawings for all the 1975 models here. You might need to look a the different horsepowers to figure out what you have. Willam Johnson: 4B36D isn't a valid model number. Could it be 4836E ? That would be a 1978 4HP. Thomas Nesbitt: As Ernie mentioned that is a 7.5HP from 1958. We don't have the Evinrude drawings posted but we do have the Johnson drawings for the same year. They will be the same for most parts. Generally the difference would be motor cover, decals, emblems, etc. 1958 7.5HP. These drawings are all on the our affiliated web site, MarineEngine.com Thanks. Andrew   kitty New member Username: kitty Post Number: 1 Registered: 09-2017 Posted on Monday, September 11, 2017 - 01:06 pm:        Looking for info on an evinrude motor or pics if possible Restoring an old motor evinrude 4334 50642   ernie Senior Member Username: ernie Post Number: 2403 Registered: 01-2002 Posted on Monday, September 11, 2017 - 07:29 pm:        From Marine Engine dot Com Try AOMCI.org for more info. Hope this helps Ernie Evinrude 1.1 HP Motor Models Year Model 1938 4252 4253 1938-41 4266 1939-41 4265 4334 1946-47 4407