|3 hp K1 Watermota/ Waterman
Post Number: 18
|Posted on Tuesday, April 22, 2014 - 07:46 am: ||
Grateful if any member could advise the bore and stroke measurements for this engine.
Have most of the manual but this info not given.
Post Number: 22
|Posted on Tuesday, April 22, 2014 - 04:32 pm: ||
Waterman K1 is two and three quarters Bore by three inch stroke. Have never seen 3hp. on a Waterman K1 tag. Usually 2hp. K2 strangely is 5hp.