Home | Classifieds | History | Technical | Links | Store | About Us | Email
Topics Topics Edit Profile Profile Help/Instructions Help Member List Register  
Search Last 1|3|7 Days Search Search Tree View Tree View  

SABB Model H

Old Marine Engine » Diesel Inboards » SABB Model H « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

o_roughy
New member
Username: o_roughy

Post Number: 1
Registered: 01-2007
Posted on Sunday, January 14, 2007 - 03:17 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I've just bought a new (old) boat with a '76 SABB Model H , 10hp diesel.

Are there any sarcifical anodes in the motor itself?
Top of pagePrevious messageNext messageBottom of page Link to this message

Coen
Visitor
Posted on Sunday, January 21, 2007 - 06:18 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Hi O Roughy,
I have a manual with my '72 model H and it doesn't say anything about a sacrificial anode. I don't think Sabb fitted any.
Are you certain your engine delivers 10 HP? Manual promises 6 HP at 1500 rpm or 8 HP at 2000 rpm. Model G does 10 HP because of it's longer stroke.
Top of pagePrevious messageNext messageBottom of page Link to this message

peter_b
New member
Username: peter_b

Post Number: 2
Registered: 02-2007
Posted on Thursday, February 22, 2007 - 11:33 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Hi. I'm a bit late picking up on this thread, but my 1977 Sabb 2H, the twin cylinder version of yours, certainly does have an anode, and I have to change it every couple of years too. Here's the pic from my user manual showing where it is(Item 1), which is at the fly wheel end of the silencer. Hope this helps.

Cheers
Peter Sabb 2H sacrificial anode
Top of pagePrevious messageNext messageBottom of page Link to this message

o_roughy
New member
Username: o_roughy

Post Number: 2
Registered: 01-2007
Posted on Thursday, September 04, 2008 - 04:18 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

My Sabb model H has a Bosch dyno which has cracked the cast iron mount to the engine. I am trying to repair it although that isn't looking very positive at this stage. Does anyone know where I might find a suitable alternative?
Top of pagePrevious messageNext messageBottom of page Link to this message

jimdereynier
Member
Username: jimdereynier

Post Number: 12
Registered: 08-2007
Posted on Tuesday, September 09, 2008 - 11:20 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Bosch dyno- fuel injection pump for Sabb 2 H.
Welding cast iron is real art. I was searching the web and found this site : http://www.pbase.com/bernds_porsche_935s/engines_mfi_pump_bosch_935.
They might help but- $$$$
Top of pagePrevious messageNext messageBottom of page Link to this message

jimdereynier
Advanced Member
Username: jimdereynier

Post Number: 50
Registered: 08-2007
Posted on Tuesday, March 13, 2012 - 09:13 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Sabb dealer in UK? - need e-mail address

I need to buy cylinder sleeves for a SABB 2H. USA and Norway do not have them in stock. Can someone supply me with the UK Sabb dealer e-mail address.
Thanks, Jim 860-305-1582
Top of pagePrevious messageNext messageBottom of page Link to this message

rene
New member
Username: rene

Post Number: 1
Registered: 03-2012
Posted on Monday, March 19, 2012 - 01:00 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

@Jim

You could try Jachtservice Amsterdam.

http://www.jachtservice.nl/pages/welkom.html

[email protected]

I've recently ordered there a complete gasketset and a PLG for my Sabb H1. They have quite some knowledge about Sabb.

Rene
Top of pagePrevious messageNext messageBottom of page Link to this message

jimdereynier
Senior Member
Username: jimdereynier

Post Number: 53
Registered: 08-2007
Posted on Monday, March 19, 2012 - 06:43 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Thanks- I keep them on my contact list. The parts came in last Friday.
Top of pagePrevious messageNext messageBottom of page Link to this message

gjackson33
New member
Username: gjackson33

Post Number: 1
Registered: 05-2013
Posted on Tuesday, May 07, 2013 - 12:40 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

How do you disengage the clutch on a 1978 Sabb one cylinder diesel. We have remote controls on one side two controls together on the other side of the boat one.
Top of pagePrevious messageNext messageBottom of page Link to this message

jimdereynier
Senior Member
Username: jimdereynier

Post Number: 79
Registered: 08-2007
Posted on Thursday, May 09, 2013 - 02:55 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

You need an operator manual. I am in Prague right now. I think I have on my hard drive, write me after 06/15
[email protected]
In the meantime, look for local sources for Alaska Yellow cedar ( my deck) and Stika spruce- ( all the spars). Looking for small quantities- UPS restrictions. ( 70 pounds)
Love your Murray marine Hardware- they just fixed a iron hound problem with a SS split ring.
Top of pagePrevious messageNext messageBottom of page Link to this message

gjackson33
Member
Username: gjackson33

Post Number: 4
Registered: 05-2013
Posted on Thursday, May 16, 2013 - 06:21 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Jimdereynier-
I could probably find or come across yellow cedar and spruce. What lengths?
gjackson
Top of pagePrevious messageNext messageBottom of page Link to this message

William E Shelton
Visitor
Posted on Wednesday, December 18, 2013 - 06:20 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have a single cylinder SABB diesel
It has a pronounced "THUMP"when running
Turning the engine over with the starter motor and in the decompression mode there is no "THUMP"
How much of a "THUMP" is normal in these engines.
I have disassembled this engine and replaced the crankshaft main bearings,the wristspin,connecting rod bearing are sound,with no play .the ejector is rebuilt the injector pump timing is spot on.the valve setting and timing is spot on.
The counterweights timing is spot on. I took the flywheel to a
Machine shop and had it balanced.The motor mounts are new.
I have seen these engines running on U-TUBE and they seem to be running mutch smoother-no thump or vibration.
Maybe I'm expecting too much!?

Any help or additional ideas greatly appreciated

Thanks. Will
Top of pagePrevious messageNext messageBottom of page Link to this message

jimdereynier
Senior Member
Username: jimdereynier

Post Number: 91
Registered: 08-2007
Posted on Wednesday, December 18, 2013 - 08:45 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

How to measure Engine vibration:

We need some real engine mechanics to weigh in on this subject. Vibration in helicopters is employment field by itself. Maybe the method people use to measure prop shaft straightness could be adapted to measuring excessive engine vibration. Took my Sabb 2H out last year to overhaul it and got lucky on the installation. No difference in movement and the prop flange lined up under .003�.
Top of pagePrevious messageNext messageBottom of page Link to this message

Margaret Mastaj
Visitor
Posted on Thursday, January 02, 2014 - 06:55 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Hi, Does anyone know where I can get a Cylinder Head for Sabb 8HP model H&HG. I would appreciate the members help. I leave in London /UK.
Top of pagePrevious messageNext messageBottom of page Link to this message

dory
New member
Username: dory

Post Number: 1
Registered: 07-2014
Posted on Friday, July 11, 2014 - 03:31 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have a sabb gg motor that needs the injector assemble for a gg or h 10 hp motor part number 00093, 001891, 001196 on the manual is 7,8,9,10,and 11
Top of pagePrevious messageNext messageBottom of page Link to this message

johnoxley
Senior Member
Username: johnoxley

Post Number: 138
Registered: 04-2010
Posted on Sunday, July 05, 2015 - 10:32 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

New problem Saab 8HP single diesel. Starts and idles OK under load. Accelerate and engine slows and puts out black sooty smoke. Engine + shaft turn freely by hand. Injector just serviced. Intake clear.
Any ideas?
Top of pagePrevious messageNext messageBottom of page Link to this message

matt_morehouse
Senior Member
Username: matt_morehouse

Post Number: 159
Registered: 12-2009
Posted on Sunday, July 05, 2015 - 11:21 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Black sooty smoke usually means too much load. Does it run OK under medium load?
Top of pagePrevious messageNext messageBottom of page Link to this message

johnoxley
Senior Member
Username: johnoxley

Post Number: 139
Registered: 04-2010
Posted on Monday, July 06, 2015 - 01:30 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Not sure as falters and smokes on throttle above idle. Sort of opposite problems.
Older install with same prop, shaftline, etc. Used to be OK.
Top of pagePrevious messageNext messageBottom of page Link to this message

sabb
Visitor
Posted on Sunday, October 23, 2016 - 08:43 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Hi I have had a sabb 8hp h model in my 25ft roberts sailboat nothing but an ongoing problematic engine for the last 12 years if you have a spanner handy save yourself a lot of time and trouble unbolt it and make an anchor mooring of it.
Top of pagePrevious messageNext messageBottom of page Link to this message

jimdereynier
Senior Member
Username: jimdereynier

Post Number: 122
Registered: 08-2007
Posted on Sunday, October 23, 2016 - 09:14 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have a 2 H with 31 years of experience. Never had any problems if you do the maintenance. TLC works on this engine as with my British Seagull. You need to learn how to listen to the engine- You need to develop some Karma with it., ( It probably help to have a spare engine to take parts off of it. )
Top of pagePrevious messageNext messageBottom of page Link to this message

mickeyflute
Member
Username: mickeyflute

Post Number: 7
Registered: 07-2013
Posted on Tuesday, February 14, 2017 - 05:35 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Hi Folks, Need to fit a new temp sender to my 2hg. Unfortunately the treads in the block are in a terrible condition, the last temp sender seemed to be pushed in! any ideas for retreading the block?
Bought a new temp sender off Bill in Florida.

Thanks in advance

Mick
Top of pagePrevious messageNext messageBottom of page Link to this message

bruce
Senior Member
Username: bruce

Post Number: 594
Registered: 07-2002
Posted on Wednesday, February 15, 2017 - 10:45 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

drill out, tap larger and install correct size brass bushing
Top of pagePrevious messageNext messageBottom of page Link to this message

Greg cornett
Visitor
Posted on Wednesday, May 17, 2017 - 10:32 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Hi there my compony just recently purchased a Ferrell cement schooner and it has a sabb 2h with a variable pitch prop. We just launched her today and I had a surveyed tell me and help me get the engine working little to my suprise the variable pitch lever only goes in astern propulsion. It won't go fwds. Any help or idea as to the reason that may be would be greatly appreciated thanks.

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Password:
E-mail:
Options: Automatically activate URLs in message
Action:

Administration Administration Log Out Log Out   Previous Page Previous Page Next Page Next Page

Home | Classifieds | History | Technical | Links | Store | About Us | Email
&copy 2005 OldMarineEngine.com, P.O. Box 188, Forest Dale, VT 05745-0188 • Phone: 802-247-4864 • All rights reserved.
   Marine Engine Seloc Repair Manual Lookup Tool

marine gas engine repair and restoration