Home | Classifieds | History | Technical | Links | Store | About Us | Email
Topics Topics Edit Profile Profile Help/Instructions Help Member List Register  
Search Last 1|3|7 Days Search Search Tree View Tree View  

Distributor sticks up through the head?

Old Marine Engine » Gray Marine Gas Engines - 4, 6, and 8 cylinder » Distributor sticks up through the head? « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

MichaelRidout
Visitor
Posted on Saturday, May 07, 2005 - 10:37 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have been looking at a lot of pics of Gray 4 cyl engines and I have not seen one where the distributor actually sticks up THROUGH the head.

Do you mean that it actually mounts on the top of the head or do you mean mounted straight up out of the crankcase just to the rear of the cylinder block?

If the former, does someone have a pic?

Mick Ridout
[email protected]
Top of pagePrevious messageNext messageBottom of page Link to this message

larry_from_maryland
Senior Member
Username: larry_from_maryland

Post Number: 228
Registered: 07-2003
Posted on Saturday, May 07, 2005 - 01:24 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

The standard contintal farm/industrial engine has the distributor sticking right up through the middle of the head.If you look close you can see the the round casting mark where it would go on the grey marine engines.Apparently grey wanted the engines shorter so on the ones they used the distributor has been moved to the rear either laying down or standing up.I don't have pictures,but there are plenty on farm tractor sites.i have an engine here or go look at the drake tail at CMM.
Top of pagePrevious messageNext messageBottom of page Link to this message

richardday
Senior Member
Username: richardday

Post Number: 397
Registered: 11-2003


Posted on Sunday, May 08, 2005 - 07:53 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I cannot pass up a coment on Larry's comment on the "Drake Tail" hull at CMM. There were actually two common names for that hull style around the Chesapeake bay. It depends on what area of the Bay or its tributaries what these nifty hulls were called. In the northern area of the Bay they were called "Mule Hoof" Sterns and in the lower portion of the Bay "Drake Tails". Myself I learned "Mule Hoof Stern" having spent years around the Annapolis area. To me the stern design looks just like a horse or mule foot. As I understand the basic hull design they were long and narrow hulls which permitted at slow idle with an NR-1 or ZR-1 a crabber with little need for agressive steering to follow a trot line picking up crabs as the line passed over a roller fixed to a midship plank sticking out from the side about 18". The rollers were often discarded wringer rollers from old wahing machines. The aft section of the hull was designed to keep the hull from squatting in the water when underway. These hulls are no longer common on the Bay and like a lot of industrial tools they were great for the intended purpose but not much good for any other use hence their demise. I will say that trot lining is a great way to catch crabs if there are any to catch which has become another sad story of pollution. Curent speculation is this will be a good year for crabs. I hope they are right as the last few years have been a disaster. I was told a few days ago Good crabs are going for $150.00 a bushel. A long ways for $10.00 a bushel thirty years ago.
Top of pagePrevious messageNext messageBottom of page Link to this message

MichaelRidout
Visitor
Posted on Tuesday, May 10, 2005 - 10:46 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Well, I saw a little Clark forklift yesterday and lo and behold it had a Continental motor in it with the distributor coming out through the head. The cast-in number on the block and head were F400. The rebuild tag riveted on the block said "Model: F4124" and "Make: Conti 1262".

Mick Ridout
[email protected]
Top of pagePrevious messageNext messageBottom of page Link to this message

Bart Hendrix
Member
Username: bart

Post Number: 7
Registered: 01-2005
Posted on Wednesday, December 05, 2007 - 10:01 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have a couple of Express 244s with the distributors mounted aft. However, the location where it would go up through the head has been filled with a take off for a mechanical tach. Yes, straight up through the middle of the head.
Top of pagePrevious messageNext messageBottom of page Link to this message

J.B. Castagnos
Senior Member
Username: jb_castagnos

Post Number: 321
Registered: 07-2002


Posted on Thursday, December 06, 2007 - 06:40 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

It was common for the distributor to drive the oil pump, so if it was moved they still had to have a rotating shaft there, a nice place for a tach drive.

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Password:
E-mail:
Options: Automatically activate URLs in message
Action:

Administration Administration Log Out Log Out   Previous Page Previous Page Next Page Next Page

Home | Classifieds | History | Technical | Links | Store | About Us | Email
&copy 2005 OldMarineEngine.com, P.O. Box 188, Forest Dale, VT 05745-0188 • Phone: 802-247-4864 • All rights reserved.
   Marine Engine Seloc Repair Manual Lookup Tool

marine gas engine repair and restoration