Home | Classifieds | History | Technical | Links | Store | About Us | Email
Topics Topics Edit Profile Profile Help/Instructions Help Member List Register  
Search Last 1|3|7 Days Search Search Tree View Tree View  

What type of trailer?

Old Marine Engine » Boats with Early Inboards » What type of trailer? « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

matt
New member
Username: matt

Post Number: 3
Registered: 04-2006
Posted on Thursday, August 31, 2006 - 05:53 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

My father and i are puting together a 16foot clinker open launch, it will be powered by a stuart turner p55, my question is about trailers, would anyone be able to give me a approximate weight of the boat plus motor and be able to suggest the best type of trailer to transport the boat.
The boat will be taken to many putt putt regattas and win many trophys we hope, so a sturdy reliable trailer is needed.
thanks for any help anyone can give
Matt and Ron
Top of pagePrevious messageNext messageBottom of page Link to this message

david_stott
Member
Username: david_stott

Post Number: 9
Registered: 06-2005
Posted on Thursday, August 31, 2006 - 08:49 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Matt, I own a 15' clinker putt putt with P55 fitted. Boat with motor weighs about 700kgs. I had a trailer purpose built by Easytow trailers in Heathcote Central victoria. Main theme needs to be plenty of keel rollers not just 3 or 4 provided by likes of commercial brands for plastic boats. I dont use wobble rolers as I find they get caught on the planks.

Boat sits entirely on keel rollers (about 8 I think) with timber side supports just to control movement. I also have teflon guides next to each of the rear 4 rollers which make it easy for the keel to locate itself. I can drive my boat onto the trailer easily. You will need a braked trailer.

If you get one made or have the choice, get a trailer with a "V" at the rear so that the stern of the boat sits down. Putt putts are quite deep at the stern and with a flat trailer it makes it harder to launch and retrieve.

I have photo of my boat on the trailer so will email to you directly.

I have towed my boat from Melbourne to davistown, Toronto, Goolwa and Hobart, and boat shows no distress from towing. I can provide contact details for easytow if you need it but surely there will be a custom builder in Sydney you could use.

David.
Top of pagePrevious messageNext messageBottom of page Link to this message

rosey
Member
Username: rosey

Post Number: 5
Registered: 07-2006


Posted on Monday, September 11, 2006 - 02:10 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Matt

Great advice from David. I also have just trailered my 16 Ft putt putt. I was lucky enough to find a trailer with heeps of keel rollers and have also used side supports. The only thing i would add is to get tyres with the smallest diameter as it makes it easier to launch. closer to the water and all that. Next Time I have it in the water i will take a pic just of the trailer so you can see. Hopefuly this weekend if the weahter is OK.
Top of pagePrevious messageNext messageBottom of page Link to this message

matt
Member
Username: matt

Post Number: 4
Registered: 04-2006
Posted on Monday, September 11, 2006 - 07:18 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Many thanks to David and Rosey for their help and advice, the hull is nearly planked, my father and i will be fitting her out with a mixture of Rosewood and Huon pine, and we are currently arguing over teak or beech for the laid decks.
The motor, a p55 is also nearing completion, and we are looking forward to when all the hard work is over and we can get out on the water with other enthusiasts,
again many thanks.
Matt

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Password:
E-mail:
Options: Automatically activate URLs in message
Action:

Administration Administration Log Out Log Out   Previous Page Previous Page Next Page Next Page

Home | Classifieds | History | Technical | Links | Store | About Us | Email
&copy 2005 OldMarineEngine.com, P.O. Box 188, Forest Dale, VT 05745-0188 • Phone: 802-247-4864 • All rights reserved.
   Marine Engine Seloc Repair Manual Lookup Tool

marine gas engine repair and restoration