Home | Classifieds | History | Technical | Links | Store | About Us | Email
Topics Topics Edit Profile Profile Help/Instructions Help Member List Register  
Search Last 1|3|7 Days Search Search Tree View Tree View  

1961 BUHLER 16' TURBO CRAFT - NEED IN...

Old Marine Engine » Boats with Early Inboards » 1961 BUHLER 16' TURBO CRAFT - NEED INFO « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Dennis Smith
Visitor
Posted on Thursday, February 15, 2007 - 08:16 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have a 1961 Buhler (don't know if spelt right) 16' Turbo Craft - with 1 flat head 6 cyl engine. I've been told this is a Gray Marine engine. How can I verify if this is really a Gray Marine engine? Where is the engine identification number? What prefix should I look for?
Top of pagePrevious messageNext messageBottom of page Link to this message

miro
Senior Member
Username: miro

Post Number: 266
Registered: 11-2001


Posted on Friday, February 16, 2007 - 11:44 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

The Graymarine flathead 6's usually had a name plate riveted to the exhaust manifold. The engines in the 60's generally used Hercules blocks, which were also used by Chris Craft and Buchanan ( and possibly others). Alternatively, the name plate might be on the transmission cover.

miro
Top of pagePrevious messageNext messageBottom of page Link to this message

Dennis Smith
Visitor
Posted on Saturday, February 17, 2007 - 10:43 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Thanks - We'll check it out
Top of pagePrevious messageNext messageBottom of page Link to this message

andrew
Moderator
Username: andrew

Post Number: 849
Registered: 11-2001


Posted on Saturday, February 17, 2007 - 12:05 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Dennis,

You could also post a picture of the engine here with the numbers you find.
Top of pagePrevious messageNext messageBottom of page Link to this message

Eugene Killen
Visitor
Posted on Tuesday, October 09, 2007 - 09:26 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

i too have a 1961 Buehler Turbocraft 16 footer, at least i was told that was the year. i have not found another boat with the same hull design or jet unit. my boat has a crusader marine Buehler Turbopower 200 small block chevy v-8 in it. i am very interested in seeing pictures of your boat if that is possible
Top of pagePrevious messageNext messageBottom of page Link to this message

Kent M
Visitor
Posted on Friday, October 26, 2007 - 03:48 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have a 16 foot Buehler Turbocraft, I always refer to it as a Jet 32 since that is what the emblem on the dash says. It has a Chevy 327 in it now but I was told that originaly it was a Ford Interceptor.
Top of pagePrevious messageNext messageBottom of page Link to this message

Eugene Killen
Visitor
Posted on Tuesday, October 30, 2007 - 08:54 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

my 1961 turbocraft is also a jet 32. the early boats had ford interceptor motors in them, mine however, has a chevy v-8 in it and i have talked with the original owner and he states that is how he bought the boat brand new. my intake has a crusader marine engine data plate on the intake manifold stating that it is a "Buehler Turbopower 200" built for buehler turbocraft by crusader marine. it is a Model 150 serial number TP117. my boat is very original, last registered in 1970, so depending on the year of your boat, it could have come with chevy power. in the later 60's buehler used chrysler power in his boats.
Top of pagePrevious messageNext messageBottom of page Link to this message

Carltro
Visitor
Posted on Monday, March 17, 2008 - 12:51 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have a 1961 Buehler Turbocraft Jet 32. You are correct, it originally came with a 256cc 145hp 4.4L Fored Interceptor (i have done much work on it) I am not a ford man myself, but man does that engine sound like the coolest thing ive ever herd in my life. Most of those early jetboats had the exhaust pipes coming out the back really really low. So the exhaust floated up and made this bubbly noise along with the kind of poping sound of the industrial engine.
Top of pagePrevious messageNext messageBottom of page Link to this message

luke
New member
Username: luke

Post Number: 1
Registered: 04-2008
Posted on Monday, April 07, 2008 - 02:04 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I to ,at least I was told it was a 1961,it has been a research game for me , but after seeing Eugene Killen's info. concerning the later 60 models having the Chrysler's, now I dont know what year it is, Beings mine has a for sure Chrysler slant six I.D. tag,has a Hamilton Marine Jet cable stear Model#2303 serial305-18, In the glove box is the only othe r I.D on the boat and it says Indionapolis 18 Indiana,Boat number EO260,what this implies Iam clueless as the boat was re-painted and someone didnt put the Emblems back on,so I to am kind of in the dark,any info would be appreciated fellow Buehler owner's,Luke Castle ,Boise Idaho,208-658-9739,,OR [email protected],,thanx
Top of pagePrevious messageNext messageBottom of page Link to this message

luke
New member
Username: luke

Post Number: 2
Registered: 04-2008
Posted on Monday, April 07, 2008 - 02:21 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

This is Luke Castle again fella's,I JUST NOW had an IDEA that may help us all with our 16ft'r Buehler Turbocraft Mystery's, could everyone (if willing)post their E-Mail addresses and incorperate photoes,so mayby together we could all help each other out with our little 1961 club thing? Regards to all ,Luke
Top of pagePrevious messageNext messageBottom of page Link to this message

bruce
Senior Member
Username: bruce

Post Number: 168
Registered: 07-2002
Posted on Monday, April 07, 2008 - 04:14 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Luke, Maybe you should take this thread to the fibreglassics.com page on the web.
Top of pagePrevious messageNext messageBottom of page Link to this message

luke
New member
Username: luke

Post Number: 3
Registered: 04-2008
Posted on Monday, May 12, 2008 - 06:49 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Hello, eveyone , Luke here and boy could I use some help, I Bought what I was told was a 1961 Buehler,,afetr reading that they did'nt start coming out with Chrysler power till the later "60"s,I dont know now,on the engine the brass chrhysler marine tag it's a 225 slant six and on the side where the Engine number's are,,up under and close to the manifold is a silver tag riveted on that says Bore,.040 Rods.o10,mains .010 NO.15508,,Question ,Will any of this help me ID. the year,,If not does anyone know what year the Chrysler ERA came into play, and if and when it ended, thanx Luke,}}
Top of pagePrevious messageNext messageBottom of page Link to this message

dave_myers
Advanced Member
Username: dave_myers

Post Number: 40
Registered: 11-2006


Posted on Monday, May 12, 2008 - 08:51 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Luke,
The Tag under the Manifold is an info tag that says.. Bore is 40 thou Oversize, Rod jounals on the shaft are 10 thou Undersize and Main bearings are also 10 thou Undersize. The NO.15508 is the Job Number. This all means that the engine has been reconditioed at some stage.
I recall the 225 Slant 6 in Australian boats around 1966. Do not recall the Buehler make out here though.

Cheers,

Dave
Top of pagePrevious messageNext messageBottom of page Link to this message

luke
Member
Username: luke

Post Number: 4
Registered: 04-2008
Posted on Friday, May 16, 2008 - 01:32 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Dave_Myers, Luke here,thanx much on the info. Slowly but surely we'll Hopfully get the old girl pinned down,after a lot of work I got the Old slant 6 fired up on the Engine stand and she purrs like a kitten,(dang I'm good),,now I can attack putting a new floor in her. a fella told me that their is,,Marine grade Plywood? If so ,I'd rather go with that rather than trying to re-glass almost the entire floor,,some one cut it out from the stern to almost the steering wheel,because of broken motor mounts,I'll try and get my Daughter to show me how to use the digital camara,,so I can get some pics on here,to help mayby I.D. what Ive got a little better,thanx again Dave,Best Regards,,Luke.}}
Top of pagePrevious messageNext messageBottom of page Link to this message

kelse
Visitor
Posted on Friday, May 16, 2008 - 07:58 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have my dad's 1965 or 66 16' buehler turbopower jet boat. hull is in great cond. has the buick 160hp v-8 fireball aluminum block 4 barrel downdraft carb and with a heat exchanger. wish i could locate from gray marine some newer exhaust manifolds. also need the drop down plate diverter on the water drive to use reverse on the boat.
Top of pagePrevious messageNext messageBottom of page Link to this message

Bill Charles
Visitor
Posted on Sunday, May 18, 2008 - 11:42 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

HI.........GUYS FOR WHAT IT'S WORTH......I HAVE A 16 ' 1959 BUEHLER TURBOCRAFT THAT CAME WITH THE ORIGINAL (FORD) 256 CUBIC INCH ENGINE......OVER THE YEARS I HAVE PUT IN THE BIGGER 312 CUBIC INCH T-BIRD ENGINES OF 56-57 VINTAGE AND REBUILT THE JET UNIT TO ACCOMODATE THE ADDED HORSEPOWER, AND THIS BOAT WAS CLOCKED BY POLICE RADAR GUN AS THE FASTES TIME OF 82 MPH.....I AM LOOKING FOR ANOTHER HULL FOR THIS BOAT AS I HAD SO MUCH FUN WITH THIS BOAT. I WANT TO SELL THESE ENGINES THAT I HAVE (4) AND THE COMPLETE JET UNIT [email protected]
THANKS
Top of pagePrevious messageNext messageBottom of page Link to this message

solarrog
Senior Member
Username: solarrog

Post Number: 295
Registered: 03-2002


Posted on Sunday, May 18, 2008 - 11:58 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

This is a confusing message, can you help me here, You want to buy a hull, but you want to sell your engines and jet, and old hull?
is it damaged from the high speed pounding?
in any event email direct off list, please note there is a classified section also. see the link at the top
Roger
Top of pagePrevious messageNext messageBottom of page Link to this message

Eugene Killen
Visitor
Posted on Friday, July 04, 2008 - 01:31 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

if anyone else has a early 60's buehler turbocraft or any info on these boats, please contact me. thanks, Gene Killen, email: [email protected]
Top of pagePrevious messageNext messageBottom of page Link to this message

oldschoolcatholic
New member
Username: oldschoolcatholic

Post Number: 1
Registered: 09-2008


Posted on Thursday, September 18, 2008 - 09:38 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I am picking up what I believe to be a 1961 Beuhler 17' this weekend. It is supposed to have a Corvette 283 in it which doesn't jive with the rest I have read about. I am really interested in sharing some pictures with someone. I would really like to see the windshield as mine does not have glass or frame. If someone wants to reach me ad @gmail.com to my username.
Top of pagePrevious messageNext messageBottom of page Link to this message

keith thomas
Visitor
Posted on Sunday, November 30, 2008 - 09:40 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have a1959 beuhler turbocraft with a 109 h.p 226 engine' have all paperwork ,original trailer,rebuilt carb, I put a blaster 2 coil on it, other than that it is original. FOR SALE for the right price, not under 15000, as I use it every summer, all summer, this is a unique boat,the women love it when i can turn it 180@ full throttle and not skip abeat.serious only buyers.
Top of pagePrevious messageNext messageBottom of page Link to this message

loufamoso
Visitor
Posted on Wednesday, July 15, 2009 - 10:44 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

For Sale:
1961 Buehler Turbocraft Jetdrive
$6,500.00 as is:
extra jetdrive incld [as is]
16` Bass & Ski Boat
263ci Greymarine [Continental] rebuilt less then 50hrs.
Seaworthy [no leaks]
Trailer [needs tires]
Kingman, Arizona USA 1961 Buehler Turbocraft
Top of pagePrevious messageNext messageBottom of page Link to this message

chris_wheeland
Member
Username: chris_wheeland

Post Number: 4
Registered: 02-2009
Posted on Thursday, July 16, 2009 - 05:08 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I originally posted this over on unknown engines but I believe this is the better place. I found the hull number (12)on my Turbocraft on the support for the gas tank (bow mounted). The boat is a 16 ft with a single stage pump, and a chrysler 225 slant 6. I don't really know the year but the pump output, water intake system and steering are all pre 64. I think that 64 is the year that the swim step and hand holds for boarding came along. There is no back seat. The front seat has front and rear facing seats with a full bench in the front and splits in the back with no center back rest. The steering wheel is on the left side and the throttle was originally a foot pedal. We changed that out for a stick in the 60's. I'd like to get the boat running again but the engine has a crack in the block water jacket. We ran it for years that way - just hit the bilge pump now and then. I'm looking for a replacement engine. Any help in suggested sources would be much appreciate.
Chris
Top of pagePrevious messageNext messageBottom of page Link to this message

loufamoso
Visitor
Posted on Sunday, July 19, 2009 - 12:54 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Bought mine from Original Owner who made the Colorado River run. Had to replace the original "Greymarine" stamped Head with an "International", otherwise all the parts are original `61`.

Cable steering, Garcia Depthfinder, all chrome accessories [mirrors, horn, floodlight, tiedowns].

Trailer is Homemade with 12v.battery operated winch. Has fwd. and Rear Bench seats, also padded Engine cover to seat two more if needed.

Replaced Bearfoot floorpedal with Dash mounted throttle. Added Waterproofed speaker sys and radio, plus rearmounted trolling motor stand.

Still a *headturner* Roostertailing through Lake Mohave. Needs TLC, been yardboat for last few years.

61 Classic
Top of pagePrevious messageNext messageBottom of page Link to this message

chris_wheeland
Member
Username: chris_wheeland

Post Number: 6
Registered: 02-2009
Posted on Monday, July 20, 2009 - 04:46 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

loufamoso

Love the boat. I hope she finds a good home. I'd be interested but it would not be good for my domestic tranquility.

Chris
Top of pagePrevious messageNext messageBottom of page Link to this message

loufamoso
Visitor
Posted on Monday, July 20, 2009 - 11:03 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

She was a lot of fun to take out, and I loved the remarks from the other boatowners when I use to launch her.
It`s too small for me and my 32` Tracker Pontoon could use some new fix`n with the cash i get from the Beuhler.
She`s got a lot of History, especially in these parts.
My domestic Tranquillity is another reason she`s going.1961 Beuhler
Top of pagePrevious messageNext messageBottom of page Link to this message

Ryan Walker
Visitor
Posted on Monday, August 17, 2009 - 01:25 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Hello, im a first timer. I purchased 1964 16' turbocraft. It runs great but the prop is rubbing on the stainless sleave. So I need a new bearing I have it taken apart but I do not know where to find replacement parts can anyone direct me to a parts source. Thank you,
Top of pagePrevious messageNext messageBottom of page Link to this message

swamp daddy
Visitor
Posted on Tuesday, September 15, 2009 - 12:24 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

what do you call your little group of turbo owners?
to the guy with boat number EO260 I have boat number EO281 my title says 1961.what type of shifter do your boats use.
mine is right hand drive hand throtle with a tall chrome mechanical shifter coming up on drivers left like a floor shift auto.
Top of pagePrevious messageNext messageBottom of page Link to this message

chris_wheeland
Member
Username: chris_wheeland

Post Number: 7
Registered: 02-2009
Posted on Tuesday, September 15, 2009 - 10:38 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Daddy, No name - just some lost souls in search of info and parts!
Lou - any action on the boat?

Chris
Top of pagePrevious messageNext messageBottom of page Link to this message

swamp daddy
Visitor
Posted on Tuesday, September 15, 2009 - 05:11 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

hey chris like you trying to find info or history on boat.swampdaddy is my nickname and cb handle.I saw the guy with boat #EO260 was not sure of the year on his boat and my boat is #EO281 and titled as 1961.sad to say mine was a stripped out hull when i found it even jet drive was empty,I was able to track down all the drive parts including the drive shaft but motor and all related parts were a no show.i do have the engine cover and know what the seating was.I was looking at the few pics here and on fiberclassics so far all the boats i've seen have been left hand drive steering and foot pedal for gas i dont know how yours are shifted but mine is right hand drive with morse hand throttle on your right with a manual floor shifter for jet drives forward neutral reverse.can anyone post pics of thier cockpit or controls would like to compare
Top of pagePrevious messageNext messageBottom of page Link to this message

loufamoso
Visitor
Posted on Sunday, September 27, 2009 - 10:33 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Chris: No action on the Sale, but I only have it published here. You can see there are very few posts on this website.

SD[swampdaddy]: Mine is a `61` with Hydrolic pump and electric switch to operate flume. I have an extra jet drive I was given with boat. Supposedly it worked back then but I never had the need to test or use it as the original one works just fine. It was originally pedal throttle but too hard to control so now it`s dash throttle...works better and easier to maintain constant speeds.61 Buehler Turbocraft

The block of wood on the right was added to hold a trolling motor I had mounted there.
Top of pagePrevious messageNext messageBottom of page Link to this message

johnny
Senior Member
Username: johnny

Post Number: 189
Registered: 03-2006
Posted on Sunday, September 27, 2009 - 11:33 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Thought I was on the pre-1940 website? Guess I better go back and check the home page.
Top of pagePrevious messageNext messageBottom of page Link to this message

swampdaddy
Visitor
Posted on Tuesday, September 29, 2009 - 03:17 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

chris my steering and shift are different from yours.for some reason i can not download pic here it says file is to big. I would really like to exchange info and or pics about these boats . if anyone is interested i am trying to set up a web thing thru msn live.
we will be able to create photo albums to download pics of our boats that we can share to the web and have discussion groups.I started an album with more pics of my jetdrive steering and shifter feel free to check them out and join the club if you like.
i am no web master so please if you or anyone can do a better job or just want to help let me know and i can add a co-owner to work on site.
if the url does not work or you can not find site e-mail me at [email protected] and i can send invite to you.
group name Beuhler Turbocraft at
http://[email protected]
e-mail
[email protected]
Top of pagePrevious messageNext messageBottom of page Link to this message

danno
New member
Username: danno

Post Number: 2
Registered: 10-2009
Posted on Thursday, October 01, 2009 - 12:20 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I posted this pic on another thread also. Does anyone know what the heck this is? (I know the boat is a Jet 32). It has an Interceptor in it.drive
Top of pagePrevious messageNext messageBottom of page Link to this message

a_lab_lover
New member
Username: a_lab_lover

Post Number: 1
Registered: 10-2009
Posted on Thursday, October 01, 2009 - 02:17 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

loufamoso: what's your ask price for your boat?
Top of pagePrevious messageNext messageBottom of page Link to this message

chris_wheeland
Member
Username: chris_wheeland

Post Number: 8
Registered: 02-2009
Posted on Thursday, October 01, 2009 - 04:54 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Guys, I'll have to get the cover off of the old gal and take some pics.
Lou - your instrument cluster looks like mine but the wheel is different. My hull has less tumblehome and almost no shear.
Chris
Top of pagePrevious messageNext messageBottom of page Link to this message

loufamoso
Visitor
Posted on Saturday, October 10, 2009 - 09:31 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Danno: That`s the *Flume* and it looks hydrolic driven...The Flume directs the waterjet for steering and speed.

Lab Lover: I`m pretty FIRM on the $6,500...I won`t be making a dime at that price but I have other toys that need referbing.

Chris: Trust me when I say I can launch mine in a Bath Tub....the Hull is sound and drafts about 3-5inches. Center of Gravity is amazing. That Garcia depthfinder is original [61]

61 Classic
Top of pagePrevious messageNext messageBottom of page Link to this message

chris_wheeland
Member
Username: chris_wheeland

Post Number: 9
Registered: 02-2009
Posted on Thursday, October 15, 2009 - 08:37 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Johnny,
And I quote "An antique (Latin: antiquus; old) is an old collectible item. It is collected or desirable because of its age, rarity, condition, utility, or other unique features."
Please allow a big tent.
Chris
Top of pagePrevious messageNext messageBottom of page Link to this message

terry hertzog
Visitor
Posted on Monday, December 07, 2009 - 05:35 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

i just got a 61 turbocraft that i dont want, new 350 chevy and jet drive was rebuilt.nice boat, right drive, hand throttle, floor shift. call 386-984-9013 Terry, 2500.00
Top of pagePrevious messageNext messageBottom of page Link to this message

a_lab_lover
New member
Username: a_lab_lover

Post Number: 2
Registered: 10-2009
Posted on Monday, December 07, 2009 - 09:23 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Terry: do you have any pics that you can post or email?
Top of pagePrevious messageNext messageBottom of page Link to this message

terry hertzog
Visitor
Posted on Monday, December 07, 2009 - 01:51 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

yes, my e-mail is [email protected]
Top of pagePrevious messageNext messageBottom of page Link to this message

[email protected]
Visitor
Posted on Thursday, December 31, 2009 - 02:03 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Anyone know where I can find a windshield for a 61 Dowty Turbo Craft or Buehler
Top of pagePrevious messageNext messageBottom of page Link to this message

Don Williams
Visitor
Posted on Saturday, February 20, 2010 - 03:35 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have a 1959 Buehler Turbocraft, 16 foot, 256 ford V8, Carter side draft carburator, Hydraulic gate valve. This boat was bought new by my Father in Law in 1959. I have the original owners manual and engine manual that came with the Boat. This boat is orginal except for a ford 272 distributor and a Cigarette lighter installed in the dash, and interior. The Boat is in very good shape and is water ready. Does anybody know what this boat may be worth????
Top of pagePrevious messageNext messageBottom of page Link to this message

capn_kirk
New member
Username: capn_kirk

Post Number: 1
Registered: 08-2010
Posted on Monday, August 30, 2010 - 01:59 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Hello; I have a 1969 Buehler jet boat with Model 75-2C jet pump. It is a two stage pump, I am looking for the rubber Stave bearing that goes in the main housing between the two impellers the Shaft OD is 1.500" with the housing of 1.798" the bearing needs to be about .140" thick
Thanks

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Password:
E-mail:
Options: Automatically activate URLs in message
Action:

Administration Administration Log Out Log Out   Previous Page Previous Page Next Page Next Page

Home | Classifieds | History | Technical | Links | Store | About Us | Email
&copy 2005 OldMarineEngine.com, P.O. Box 188, Forest Dale, VT 05745-0188 • Phone: 802-247-4864 • All rights reserved.
   Marine Engine Seloc Repair Manual Lookup Tool

marine gas engine repair and restoration