Home | Classifieds | History | Technical | Links | Store | About Us | Email
Topics Topics Edit Profile Profile Help/Instructions Help Member List Register  
Search Last 1|3|7 Days Search Search Tree View Tree View  

Stuart Turner P55

Old Marine Engine » Boats with Early Inboards » Stuart Turner P55 « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

terry
Posted on Wednesday, January 07, 2004 - 05:31 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have a Stuart Turner P55 ( well it looks identical to the one shown on the home page) and i want to know more about it. It is fitted with a Sloex 26-FH carb that leaks at the venturi in the barrel - anyone got an exploded diagram of this carb/ - its had an attack of corrosion in the barrel and I can't figure out how the venturi should look. The engine turns over and fires once or twice but no joy in getting to the bottom of the carb story!
The engine is also available for sale, semi-restored, but I'm down in Simonstown, South Africa......( I can also swop it for an equivalent marine diesel and gearbox to fit the same bed and shaft.)
Any info will be much appreciated - I will get the serial number and post it on this site, soonest.
Top of pagePrevious messageNext messageBottom of page Link to this message

David Stott
Posted on Wednesday, January 07, 2004 - 06:58 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Terry, I also have a P55 fitted with this carby. There is some info on Solex carby's on this site that may help. I will see what I have re exploded views. By the venturi do you mean the throttle flap?

I had a lot of trouble with over-rich running, and experimented with various main jets. Can you tell me the code numbers stamped onto the flange of the main jet? You get to the jet by removing the top of the carby, then unscrewing the brass jet retainer beside the float bowl. A loose jet about 2cm long resides there.
Top of pagePrevious messageNext messageBottom of page Link to this message

donwhite
Posted on Wednesday, January 07, 2004 - 07:29 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

David asks, "By the venturi do you mean the throttle flap?"

DON: I believe the 'venturi' is the narrowing or constricting of the carby's air flow tube, cast in the carby's body. Because the same amount of air flows through this restricted area, the air speeds up, allowing for a better mixing of the fuel droplets introduced into the airflow in or near the venturi.. The air resumes its former speed as it exits the venturi area.
Don White
Top of pagePrevious messageNext messageBottom of page Link to this message

David Stott
Posted on Monday, January 12, 2004 - 05:18 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Terry, I have a diagram of the Solex Type 26 FHDL Which is very similar and the closest I have found to that fitted to the P55.

Can you send me an email address or postal address and I will send you a copy.
Top of pagePrevious messageNext messageBottom of page Link to this message

peter
Posted on Monday, March 15, 2004 - 02:23 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Looking for a P55M Stuart Turner to buy for my old clinker fishing boat
Top of pagePrevious messageNext messageBottom of page Link to this message

Paul Usher
Posted on Friday, April 09, 2004 - 04:43 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have aquired a P55ME and was wondering if anyone has a wiring diagram. The plug leads are flapping in the in air and it looks as though 2 coils should be attached somewhere between the HT leads and the 2 wires coming out of the WIPAC housing (with the 2 contact breakers). Any info greatfully received.
Top of pagePrevious messageNext messageBottom of page Link to this message

gazza19530
Posted on Sunday, May 23, 2004 - 01:38 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

hi there,
i have a stuart turner 8hp P55m do you know where i can get a head gasket for this engine.
as i am doing a full service on this engine and any information will be gratefuuy recieved.
regards gary.
Top of pagePrevious messageNext messageBottom of page Link to this message

andrew
Posted on Sunday, May 23, 2004 - 10:27 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

You should be able to get a gasket from Fairways Marine.
Top of pagePrevious messageNext messageBottom of page Link to this message

Nick
Posted on Friday, June 11, 2004 - 01:57 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Just broke the water pump mounting casting on a
P55ME. Seems that the pump piston had seized up.
Occured when cranking the engine after about a months storage.Engine installed on a Virtue sailboat. Does anybody have the necessary parts for repair in the USA?

Any help much appreciated!

Nick
Top of pagePrevious messageNext messageBottom of page Link to this message

wdboat
Posted on Friday, June 11, 2004 - 10:15 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

NICK, Check with Roger DiRuscio at [email protected] or work phone 510-226-9785.
Roger had a Stuart Turner that was not repairable and may have the part you need.
Good luck, Arthur
Top of pagePrevious messageNext messageBottom of page Link to this message

solarrog
Posted on Friday, June 11, 2004 - 10:45 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I just checked, my engine does have the pump and housing. I will not know condition until I remove it
Roger
Top of pagePrevious messageNext messageBottom of page Link to this message

nick
Posted on Tuesday, June 15, 2004 - 04:06 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Thank you Roger for helping with that broken water pump on the Stuart Turner P55ME. Unfortunately we have the pump that is driven out of the side of the block. So we are still looking for the pump.

regards
Larry/Nick
Top of pagePrevious messageNext messageBottom of page Link to this message

M.R.Harrison
Visitor
Posted on Friday, January 28, 2005 - 03:48 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

VINTAGE MARINE ENGINE
Stuart P66 twin 2stroke (1971, documented)
Good runner still in use.
F/r gearbox, �Weedless� prop, original controls.
Rewound Cyba Dynastart, serviced Solex carb.
Key start, new electrics, fuel tank and pump.
Replacing with Boat Show offer new diesel.
Available Totnes, Devon, UK. mid February.
(I have recently spent a little over �400 on NEW parts for this engine and someone is going to get a bargain. My partner wants the diesel, cos its NEW and the salesman was good looking).
�500. Buyer collects. Tel 01803 858323.
Top of pagePrevious messageNext messageBottom of page Link to this message

andrew
Moderator
Username: andrew

Post Number: 1038
Registered: 11-2001


Posted on Friday, January 28, 2005 - 04:41 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

M.R.,

Please post that notice in the classifieds section of our partner site MarineEngine.com.
Top of pagePrevious messageNext messageBottom of page Link to this message

Guest Coughlan
Visitor
Posted on Tuesday, June 23, 2015 - 07:19 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I Have some Stuart Turner Parts available including Bronze carby.. Crank handle, magneto and some other bits.. The block just rusted away while in storage also a bronze (brass) clutch .
i can be contacted

[email protected]

ghdfsd

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Password:
E-mail:
Options: Automatically activate URLs in message
Action:

Administration Administration Log Out Log Out   Previous Page Previous Page Next Page Next Page

Home | Classifieds | History | Technical | Links | Store | About Us | Email
&copy 2005 OldMarineEngine.com, P.O. Box 188, Forest Dale, VT 05745-0188 • Phone: 802-247-4864 • All rights reserved.
   Marine Engine Seloc Repair Manual Lookup Tool

marine gas engine repair and restoration