Home | Classifieds | History | Technical | Links | Store | About Us | Email
Topics Topics Edit Profile Profile Help/Instructions Help Member List Register  
Search Last 1|3|7 Days Search Search Tree View Tree View  

Chrysler Outboard Corp.

Old Marine Engine » Miscellaneous » Chrysler Outboard Corp. « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Thomas E.Trowbridge Sr.
Posted on Saturday, February 09, 2002 - 01:09 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Looking for information on Chrysler Outboard Corp. 4cyl 32 cu.oh/v engine,serial # J 068737.
Military Model 4A032.II.This engine is being used on a 3kw,1 & 3 Phase Onan generator.I would like to add a starter if possable.
thanks,
Tom Trowbridge Sr.
Top of pagePrevious messageNext messageBottom of page Link to this message

Don Dreher
Posted on Thursday, April 15, 2004 - 05:46 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have a Chrysler 105hp Charger with the model number 1055HB. I need to know what year and if there is a special meaning to "Charger"

Don
Top of pagePrevious messageNext messageBottom of page Link to this message

andrew
Posted on Sunday, April 18, 2004 - 06:54 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Don,

1055HP is a 105HP, model year 1976.

We have a listing of model numbers on the MarineEngine.com site at the following link: Chrysler Outboard ...although for some reason it doesn't show model 1055HB...

I don't know what defined the the Charger models.

Regards,
Andrew
Top of pagePrevious messageNext messageBottom of page Link to this message

Jerry Meier
Visitor
Posted on Tuesday, July 13, 2004 - 03:21 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have a 4hp Chrysler outboard Model#42H8D-serial #11243,that I have not used in years and have lost owners manual. What is the ratio of 2 cycle oil to gas for this motor?
Thanks,
Jerry
Top of pagePrevious messageNext messageBottom of page Link to this message

andrew
Moderator
Username: andrew

Post Number: 807
Registered: 11-2001


Posted on Tuesday, July 13, 2004 - 06:37 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

That's a 1978 motor.

I just checked the service manual... and it doesn't say, but I believe the gas to oil should be 50:1 for that motor.

You can get more outboard help on the discussion board at MarineEngine.com.
Top of pagePrevious messageNext messageBottom of page Link to this message

Jerry Meier
Visitor
Posted on Wednesday, July 14, 2004 - 07:25 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Thanks Andrew!!
Top of pagePrevious messageNext messageBottom of page Link to this message

DEFCONIV
Visitor
Posted on Tuesday, November 16, 2004 - 09:00 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Here is a link to a military site that contains a PDF file on the 4A032 and 2A016 engines. Maybe this will help.

http://www.clcc.org/images/TM_9-2805-257-14.pdf
Top of pagePrevious messageNext messageBottom of page Link to this message

Kendall
Visitor
Posted on Thursday, February 24, 2005 - 03:16 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have a 2 cylinder air cooled 16 cu. in. 4 cycle engine manufactured by Chrysler Outboard Corp. Mfg date is 04-73 the military TM # is TM-5-2805-257-14 & 24P. The Stock # was FSN-2805-072-4871. I would like to rebuild this motor and would like to find all the technical information, torque, Hp, RPm that may be available. Also would like any information such as cutaway of assembly with discription. If anyone knows where I can find this type of information, or how I might find it I would appreciate the Help.

Thank You. Kendall Gosvener
[email protected]
Top of pagePrevious messageNext messageBottom of page Link to this message

Kendall
Visitor
Posted on Thursday, February 24, 2005 - 03:31 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

To DEFCONIV
From KENDALL

Thank You, Your help is so much appreciated.

I hope that you recognize how much your help really means.
Top of pagePrevious messageNext messageBottom of page Link to this message

Will Campbell
Visitor
Posted on Friday, August 05, 2005 - 12:29 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

For manuals on these engines you might try
http://www.boyceequipment.com/1533_2milmanuals.html
or phone them at 1-800-748-4269
as they seem to have the manuals on all of these.
Top of pagePrevious messageNext messageBottom of page Link to this message

DASRoofing
Visitor
Posted on Saturday, August 27, 2005 - 03:39 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I bought some stuff from Goverment Liquidation and a Giant Air Compressor was in the lot. Well I do not want the darn thing and am wanting to sell it. I do bot know if it runs or works nor do I care. I just do not want it. Will sell for $500 buyer to pickup from my office. The motor is a Chrysler 4cyl 32 cu.oh/v engine,serial # J090543 Model #SFL05-0003Date MFD 9/75 Mil Model #4A032-II Stock #NSN-2805-00-068-7512. There is another number but the plate is chipped so I have no clue what it is for but the number is DAAK01-74-C-5515. If noone wants to buy this, then I need a repair manual for it to make it run if it does not run.
Top of pagePrevious messageNext messageBottom of page Link to this message

solarrog
Senior Member
Username: solarrog

Post Number: 167
Registered: 03-2002
Posted on Saturday, August 27, 2005 - 03:55 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I tried too read your mind, but received a busy signal. What city and state are you in?
Roger
California
Top of pagePrevious messageNext messageBottom of page Link to this message

DASRoofing
Visitor
Posted on Saturday, August 27, 2005 - 04:31 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I am in Center, Texas. Sorry I left that out.
Dave
Top of pagePrevious messageNext messageBottom of page Link to this message

Leigh Onyxis
Visitor
Posted on Tuesday, April 04, 2006 - 06:22 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have a two cylinder 5hp chrysler out board and it is a beauty, but i have just snapped the fuel float and it is now kaput, is there a way i can repair it apart from replacing the, part because i can not find one anywhere.
(ps is there a more correct name for a fuel float)
RATONYX
Top of pagePrevious messageNext messageBottom of page Link to this message

Kathy Clevenger
Visitor
Posted on Thursday, April 06, 2006 - 09:28 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have a Chrysler 12.9 boat motor - 1973, it belonged to my dad who is deceased. Does anyone have any idea how much it should be worth and if you can get parts for them now? Any help would be appreciated.
Thanks
Kathy
Top of pagePrevious messageNext messageBottom of page Link to this message

andrew
Moderator
Username: andrew

Post Number: 623
Registered: 11-2001


Posted on Thursday, April 06, 2006 - 09:32 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Kathy,

It isn't worth much. You should use it if you can. There is a NADA price guide here.

You can get parts here or from a Mercury Marine dealer.
Top of pagePrevious messageNext messageBottom of page Link to this message

lee lewis
Visitor
Posted on Friday, May 05, 2006 - 09:14 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Hello I have a chrysler 3.5 1969 model 301 and I realy need some parts that are off the wall , like the pull rope houseing and all the guts , and a carb kit if it exists plus I have a small prob the engine has compression and spark and fuel but absoluly refuses to fire what amount of compression should I have ? the engine was locked up when I got it ?
Top of pagePrevious messageNext messageBottom of page Link to this message

bluelionmac
Visitor
Posted on Saturday, May 13, 2006 - 05:16 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

i have a 12.9 crysler i think it may be a 1973, it has a light under the top of cover and also is electric keystart. it has a short shaft. maybe one of us could sell for parts. because its not doing anygood if it wont run properly. do you have a picture of it. thanks e-mail me
Top of pagePrevious messageNext messageBottom of page Link to this message

andrew
Moderator
Username: andrew

Post Number: 654
Registered: 11-2001


Posted on Saturday, May 13, 2006 - 03:08 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Lee,

Rope start parts would probably have to be bought from a Mercury dealer. We sell carb kits for chrysler outboards on the marineengine.com site.
Top of pagePrevious messageNext messageBottom of page Link to this message

hoover
Visitor
Posted on Saturday, May 13, 2006 - 03:31 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

i have a chrysler 12.9 it idles fine while in gear.but when you increase the throttle while in gear it act as if it is jumping out of gear
Top of pagePrevious messageNext messageBottom of page Link to this message

andrew
Moderator
Username: andrew

Post Number: 655
Registered: 11-2001


Posted on Saturday, May 13, 2006 - 07:55 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Hoover,

You should post that question in the Chrysler/Force catagory of the discussion board at MarineEngine.com.

This site, OldMarineEngine.com is for old "inboards", not outboards.
Top of pagePrevious messageNext messageBottom of page Link to this message

David Zabel
Visitor
Posted on Tuesday, July 04, 2006 - 07:42 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have a 1970 Chrysler 5hp model 52ha and I have not used it for about 20 years. I believe the fuel/oil mix is 50:1, But I don't want to make a big mistake. Can anyone verify for me that this is correct?
Top of pagePrevious messageNext messageBottom of page Link to this message

Suzie McD
Visitor
Posted on Wednesday, July 05, 2006 - 02:20 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I just purchased a Chrysler 5HP model# 54HD 9533...Thiss puppy purrs like a kitten in idle but when you put it into FAST it stalls out. The motor has moved up to an higher altitude, does it need an idle adjustment or is there jets that need to be replaced? Thanks Suzie
Top of pagePrevious messageNext messageBottom of page Link to this message

foxman
Visitor
Posted on Wednesday, July 05, 2006 - 09:21 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Try replacing the fuel filter and see what that does for the cause. Unless you're using this engine on Lake Titicaca in Peru 15,000 feet above sea level I don't think altitude would hurt a little motor like this. How high up are you?
Try the filter first.
Top of pagePrevious messageNext messageBottom of page Link to this message

flyfishing
New member
Username: flyfishing

Post Number: 1
Registered: 08-2006
Posted on Sunday, August 13, 2006 - 07:38 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have a CHYSLER 4hp model # 42H8D 1978 outboard does anyone know where I can get a replacement prop?
Top of pagePrevious messageNext messageBottom of page Link to this message

[email protected]
Visitor
Posted on Friday, September 01, 2006 - 09:00 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have a chrsler 32 cu in engine mil.model # 4A032 and was trying to find some info on it to see if it would work for my app. I would like to know the h.p. and was there a common governed r.p.m.? also is there parts available or not thanks a million Rob
Top of pagePrevious messageNext messageBottom of page Link to this message

Jerry Finney
Visitor
Posted on Sunday, June 03, 2007 - 04:44 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

i need a stater for a chyster 4 chy engine jo9460s thanhs
Top of pagePrevious messageNext messageBottom of page Link to this message

Davin Carson
Visitor
Posted on Monday, June 25, 2007 - 03:59 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

i have a small, Chrysler Outboard corp. engine with a serial # 4264, and engine # 58021. can anybody tell me the year of this engine?
Top of pagePrevious messageNext messageBottom of page Link to this message

captain
New member
Username: captain

Post Number: 1
Registered: 07-2007
Posted on Saturday, July 07, 2007 - 01:53 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

hi i have a 1976 chrysler outboard engine 4 hp model # 42hb serial # 2041 and i need a complete carburator. can any one tell me where i can find one.
Top of pagePrevious messageNext messageBottom of page Link to this message

hunkoffudge
Visitor
Posted on Tuesday, August 14, 2007 - 12:18 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Hi i have recently purchased a 1971 chrysler 6hp
model 62BA. The manual start is not working. The small gear which is suspose to rise and engage the flywheel is made of plastic and is broken. The engine works fine just wondering if there is any possible way to track down a new one.
Top of pagePrevious messageNext messageBottom of page Link to this message

redmark1306
Visitor
Posted on Thursday, November 29, 2007 - 05:53 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Hi I just purchased a 1976 5hp Chrysler outboard(Model 54HD) and was wondering if anyone new of a site to download the PDF of the manuals for it, or if anyone has them if they would be kind enough to email them to me at [email protected]
Top of pagePrevious messageNext messageBottom of page Link to this message

orsimchick
Visitor
Posted on Wednesday, January 02, 2008 - 05:44 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Hi ijust bought this boat and no nothing about the motor or boats lol, can you tell me what fuel it will run on and mixture if it is 2stroke

Cheers
Top of pagePrevious messageNext messageBottom of page Link to this message

andrew
Moderator
Username: andrew

Post Number: 908
Registered: 11-2001


Posted on Wednesday, January 02, 2008 - 09:45 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

orsimchick,

You haven't given us any information on the motor... but if it's a Chrysler outboard, it's a 2 Stroke.

We sell Chrysler Outboard manuals on the MarineEngine.com site.
Top of pagePrevious messageNext messageBottom of page Link to this message

Jim Billups
Visitor
Posted on Friday, January 18, 2008 - 11:14 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Hi, just acquired the following: Chrysler Outboard Corp. military 4 cylinder, 32in3 engine: mfg. 3-71, Manual: 7M-5-2805-203-14 & 24P. Serial J065799. Stock #: FSN-2805-068-7512. Looks good. Want to adapt it to a serious log splitter (currently using a 20hp Kohler engine. Want to know any info as far as parts, manuals, etc. If it doesn't look like I can use it, it is up for grabs. Jim 760.742.1948
Top of pagePrevious messageNext messageBottom of page Link to this message

poocher
New member
Username: poocher

Post Number: 1
Registered: 01-2008
Posted on Sunday, January 27, 2008 - 12:14 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have a Chrysler 9.9 horse motor and am looking for information about it. Model # 94 HD Serial # 1084 What year is it and can u recommend a service center in southern Wisconsin or at least a place to purchase parts?
Top of pagePrevious messageNext messageBottom of page Link to this message

stephen19851209
New member
Username: stephen19851209

Post Number: 1
Registered: 03-2008
Posted on Sunday, March 23, 2008 - 08:21 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

i have a chrysler sailor force 250 serial #1008 and model #91h4d im tryin to find out why the water wont spit out of the motor.if anyone knows let me know
Top of pagePrevious messageNext messageBottom of page Link to this message

stephen19851209
New member
Username: stephen19851209

Post Number: 2
Registered: 03-2008
Posted on Sunday, March 23, 2008 - 08:27 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

does anyone know where to d/l pdf manuels?
Top of pagePrevious messageNext messageBottom of page Link to this message

Steve Sauder
Visitor
Posted on Saturday, April 12, 2008 - 08:05 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Hello, I just ran across this site as I was looking for info on a generator I purchased used from a friend. It is a Chrysler. Military model 2AO16-3. 16 c.i. , serial#- N-92635. Mnf. date, 5-72. It runs great - it just won't iddle. From the manual I found on here it looks like I am missing a spring, just behind the throttle lever. I took a big spring, hooked it on & tried it. That makes it iddle ( some what) but when I put a load on it, it didn't speed up on it's own - should it? Any help on where to find more info, where to find the right spring would be much apreciated. Thanks, Steve
Top of pagePrevious messageNext messageBottom of page Link to this message

bub
Visitor
Posted on Sunday, April 13, 2008 - 01:01 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

i have a 70 hp chrysler not sure what year exacly. the model number is 707hf-701hf serial number is 19492.the prop is mangled need to get new one can you help
Top of pagePrevious messageNext messageBottom of page Link to this message

steve sauder
Visitor
Posted on Sunday, April 13, 2008 - 04:13 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

do questions get answered on here? I see a list of them but none have been answered. thanks
Top of pagePrevious messageNext messageBottom of page Link to this message

dave_myers
Advanced Member
Username: dave_myers

Post Number: 38
Registered: 11-2006


Posted on Sunday, April 13, 2008 - 07:27 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Hi Steve,
To answer your question re replies to posts...
Yes they do get answered if there is someone on the site who knows the answer. Some times it may take a while for someone to come along and read the question..
Also, This site is primarily for "Old Marine Inboards" even though some outboards and others have been helped out.
The site for most other types of marine propulsion is on the discussion board at... http://www.marineengine.com/discus/

Cheers,

Dave
Top of pagePrevious messageNext messageBottom of page Link to this message

steve sauder
Visitor
Posted on Tuesday, April 15, 2008 - 06:15 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

thanks Dave
Top of pagePrevious messageNext messageBottom of page Link to this message

shawn kuntz
Visitor
Posted on Saturday, April 19, 2008 - 11:01 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

1984 chrysler is leaking water at exhaust gasket I believe. It is leaking below the spark plugs, basically the very bottom gasket. Can I use any goop to try to seal this? Will this cause problems with acceleration? My boat steadily increases in speed. As it gets going faster the motor will start to "take off" but the initial acceleration is terrible.
Top of pagePrevious messageNext messageBottom of page Link to this message

brian jividen
Visitor
Posted on Tuesday, May 27, 2008 - 09:02 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I am looking for a carburetor for a 12.9 chrysler engine model 122ha. If anyone knows where I could find one I would appreciate the info.
Top of pagePrevious messageNext messageBottom of page Link to this message

brian schiller
Visitor
Posted on Tuesday, July 22, 2008 - 05:28 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

hi my name is brian i have a 1969 chrysler engin 55 hp i need parts can any one help i need starter and coil pack things i hope there is some help out there thanks
Top of pagePrevious messageNext messageBottom of page Link to this message

paulgeurts
Visitor
Posted on Wednesday, August 13, 2008 - 08:25 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have chrysler 25 hp outboard model# 252h4h could any body tell me the year thanks
Top of pagePrevious messageNext messageBottom of page Link to this message

handler
New member
Username: handler

Post Number: 1
Registered: 09-2008
Posted on Wednesday, September 03, 2008 - 02:49 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I'll be darned if I can't get a straight answer. What's the oil fuel ratio for the chrysler 62-HA (6hp?)
Top of pagePrevious messageNext messageBottom of page Link to this message

andrew
Moderator
Username: andrew

Post Number: 937
Registered: 11-2001


Posted on Wednesday, September 03, 2008 - 03:00 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Handler,

This board is for old inboard motors, like the antique one lungers you see in the drawing at the top of this page. It's not intended for questions and answers about outboards of any kind.

You could try one of the many outboard motors discussion boards such as the Chrysler category on MarineEngine.com .

Thanks.
Top of pagePrevious messageNext messageBottom of page Link to this message

alfred
New member
Username: alfred

Post Number: 1
Registered: 09-2008
Posted on Saturday, September 06, 2008 - 01:20 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

have a crown chrysler M-27 R engin complete to prop are parts still obtainable for this engin and are books availible??
Top of pagePrevious messageNext messageBottom of page Link to this message

Stefan Wozniak
Visitor
Posted on Tuesday, October 14, 2008 - 12:23 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have a air compressor ( military surplass )and it is a 8 cubic inch 4 cycle 1 cylinder engine. This thing is in perfect shape except when I tried to get it running I discovered the intake manifold was broke at the head. Part # on manifold is 9786E26-1 and the rest of the stats are: NSN-2805-00-068-7510 Serial # is MO43795 and it looks like Mil Model 1A08-111( roman numeral 3) . Does anybody know anything about this thing or how I can get parts,this thing is really cool and is built well and it says it's built by Chrysler Marine Motors HELP !!!

Stefan, 989-358-0810 Northern Michigan
Top of pagePrevious messageNext messageBottom of page Link to this message

Parker Gray
Visitor
Posted on Wednesday, October 29, 2008 - 04:10 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have a smooth running Chysler 6 hp, mod. 62B8J. The prop shaft and drive shaft were recently broken (someone hit a rock with the prop). Does anyone have these parts or an old motor to sell for the parts? Thanks Please email me. Parker
Top of pagePrevious messageNext messageBottom of page Link to this message

bbq101
Visitor
Posted on Friday, January 30, 2009 - 12:39 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

hello Andrew..i have a FSN 2805-072-4871..2 cyd
4cycle 16 ci/mo#2A016 3..i would like to know
what tiep of eng. it is awiscon/onan....?if you can help..ty.. roger in so.cal..
Top of pagePrevious messageNext messageBottom of page Link to this message

Bryant Nicoson
Visitor
Posted on Tuesday, March 10, 2009 - 06:19 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have a 1976 Chrysler 90 hp outboard. Rebuilt the fuel pump and carbs (3), tuned up. Idles well, but won't take any throttle. I can increase RPM by rotating the coil though. What do I need to check or adjust? (Ran OK last season, but wasn't dependable).
Top of pagePrevious messageNext messageBottom of page Link to this message

sigurd1208
Visitor
Posted on Friday, March 27, 2009 - 03:59 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Hello
My name is Sigurdur and i have a Crysler outboard motor 45 hp. if i can get the electrical viring diagram (original)i'd think i can get it to working. can somone help?
thank´s
Top of pagePrevious messageNext messageBottom of page Link to this message

dave maclean
Visitor
Posted on Tuesday, May 26, 2009 - 12:24 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Hello,
I have a 72' Chrysler 20 Hp with electric start. It starts great, but seems to run really rich. Can anyone tell me how to adjust it properly?
Thanks a bunch,
Dave [email protected]
Top of pagePrevious messageNext messageBottom of page Link to this message

Walter Kirkland
Visitor
Posted on Monday, June 22, 2009 - 10:25 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I am looking for any kind of information on a small 2 cycle engine I have just aquired. The tag on the engine says 2 Cycle Industrial Engine by Crysler Outboard Corp. It shows Engine Model 58011 and Engine Serial 34583. Built in Hartford Wisconsin. I do not know the HP rating or year of manufacture. Would love to get some literature.
Top of pagePrevious messageNext messageBottom of page Link to this message

ray edmondson
Visitor
Posted on Sunday, July 05, 2009 - 02:13 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

can anyone tell me what year my 20hp chrysler outboard was made. the model no 202hd and serial no 4725. also what fuel /oil ratio it should use ? ? thanks heaps .
ray.
Top of pagePrevious messageNext messageBottom of page Link to this message

DAVID RUPP
Visitor
Posted on Tuesday, July 21, 2009 - 07:46 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I HAVE A CHRYSLER 9.2 HP MODEL 9741 SERIAL 2049 I CANT FIND ANYTHING ON THE YR ALSO WHEN THE KEY IS LET OFF THE START INTO THE RUN POSITION IT STOPS RUNNING WILL ONLY RUN IF THE KEY IS IN THE START POSITION CAN ANYONE HELP
Top of pagePrevious messageNext messageBottom of page Link to this message

DAVID RUPP
Visitor
Posted on Tuesday, July 21, 2009 - 10:49 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

i have found this is a 1967
Top of pagePrevious messageNext messageBottom of page Link to this message

John Mark
Visitor
Posted on Monday, August 10, 2009 - 04:24 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

What year is myChrysler model 62HD ser.6436. and what is the carb adjustment? Thank you John
Top of pagePrevious messageNext messageBottom of page Link to this message

James Holl
Visitor
Posted on Thursday, October 08, 2009 - 05:26 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have a 1978 chrysler 45hp outboard motor and need a starter. Does anyone know the model# of the starter? Also I need a choke for it if anyone has that model too I would appreciate it.
Top of pagePrevious messageNext messageBottom of page Link to this message

Richard Smith
Visitor
Posted on Tuesday, October 27, 2009 - 08:29 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have an "Onan" 1.5 KW military surplus generator with a "Chrysler Marine Engine" manufactured in 12/72. The engine is a twin-cylinder, 16 cubic inch gasoline powered. Stock # FSN 2805 072 4871, Serial #N, Military model - 2A016 III, Manual - TM5-2805-257--14 & 24P. I need a rocker arm for the intake valve }}however it still runs on one cylinder if you can believe it. Any information appreciated.

Thanks - Rick
Top of pagePrevious messageNext messageBottom of page Link to this message

doubleu.sea
Visitor
Posted on Thursday, April 08, 2010 - 06:31 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

hey i have a 7.5

sometimes i give it a run and then goes shitty
whys that?
Top of pagePrevious messageNext messageBottom of page Link to this message

floyd borthwick
Visitor
Posted on Wednesday, April 14, 2010 - 01:32 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

how and where can i find parts for Mil. Mod. 2A016-3 Chrysler Outboard Corp 16 ci. This is a surplus military generator. I'm in bad need of a fuel pump or kit.
Top of pagePrevious messageNext messageBottom of page Link to this message

Ron Splatt
Visitor
Posted on Sunday, May 02, 2010 - 08:04 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I recently purchased a 56 lyman with a 1966 Chrysler 45 hp electric start. They did not have
key for the ignition. I was wondering if anyone knows where I might get a key.
Thanks.

Ron
Top of pagePrevious messageNext messageBottom of page Link to this message

alex trollop
Visitor
Posted on Monday, July 12, 2010 - 01:07 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

hey i have 1978 4hp chrysler model# 42h8d and i need part number F10096 it is the bolt that holds the carb. bowl does anyone have the part that i could buy from them thanks
Top of pagePrevious messageNext messageBottom of page Link to this message

George Hatzi
Visitor
Posted on Tuesday, July 13, 2010 - 06:54 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Hi. I have a 1973 120HP Chrysler Outboard and the last few times I've used it, there has been some yellow fluid that has stuck to the boat's well and when the motor is out of the water it appears on the leg. It smells like a mixture of water and the oil/fuel mix. It definitely isn't gearbox oil as the gearbox oil is clean and doesn't smell like fuel. Can anyone help with where it may be coming from. Thank you, George
Top of pagePrevious messageNext messageBottom of page Link to this message

Keith Krall
Visitor
Posted on Sunday, July 18, 2010 - 10:48 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have an oldie, 1973 6 hp and broke a bushing in the accelerator control arm and looking for parts...I know it's a long shot, but any ideas? Thank you in advance. Keith
Top of pagePrevious messageNext messageBottom of page Link to this message

bruce
Senior Member
Username: bruce

Post Number: 233
Registered: 07-2002
Posted on Monday, July 19, 2010 - 06:28 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Try AOMCI.org and associated links.
Top of pagePrevious messageNext messageBottom of page Link to this message

Norm Fjellstrom
Visitor
Posted on Monday, July 26, 2010 - 11:43 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I am looking for a carb kit,impeller and a fuel pump for a 1974 20 hp chrysler out board,please help
Top of pagePrevious messageNext messageBottom of page Link to this message

hayssem elsleiman
Visitor
Posted on Thursday, September 09, 2010 - 08:43 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

i have an american force 85 hp outboard motor and the only number i can find is 856a9e any help with finding out what year the motor was manufactured?
Top of pagePrevious messageNext messageBottom of page Link to this message

Larry Arnold
Visitor
Posted on Thursday, September 09, 2010 - 02:27 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have a 2A016-3 type motor, I,m have a hard time finding spark plugs for it. The TM5 2805 25714&24P doesn't give any part No's. If I could get a Manufactors part number or if there are any coversions that have been made to get past the explosive safe type plug it will be great help.
Top of pagePrevious messageNext messageBottom of page Link to this message

mick morris
Visitor
Posted on Saturday, October 02, 2010 - 05:20 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

i have 85 horsepower crysler in good working order for sale $4,ooo.oo
phone 0438276950
Top of pagePrevious messageNext messageBottom of page Link to this message

Torbjorn Hiltunen
Visitor
Posted on Wednesday, November 17, 2010 - 03:35 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have a 1970 70 HP Chrysler outboard motor. I cant get the gear to engage if I don't shut down the engine first. I have to start with the engine engaged to be able to run the boat, Does anyone know what is the solution ? If engine closesd it works but running not.
Top of pagePrevious messageNext messageBottom of page Link to this message

bvw
New member
Username: bvw

Post Number: 1
Registered: 01-2011
Posted on Monday, January 10, 2011 - 05:34 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Hi. i have a 5hp chrysler outboard mod 54hd. I am a newbie and would like to know if it have a water pump or how its cooling works cause I have started it in the water but there is no sign of water cooling?? please help me..
Top of pagePrevious messageNext messageBottom of page Link to this message

ffortson
New member
Username: ffortson

Post Number: 1
Registered: 02-2011
Posted on Wednesday, February 09, 2011 - 09:29 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

i have a lot of 3 cyl chrysler used parts for sale.to inquire what i have my e-mail is [email protected]
Top of pagePrevious messageNext messageBottom of page Link to this message

andrew
Moderator
Username: andrew

Post Number: 1118
Registered: 11-2001


Posted on Wednesday, February 09, 2011 - 09:43 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

This forum is for early style inboard engines, not for outboards.

You could try posting Chrysler Outboard questions on the MarineEngine.com forum in the Chrysler/Force Section.

For ffortson above with parts for sale, you could post them in the Classifieds.

There are also parts and manuals available for Chrysler outboards at MarineEngine.com at this link.

THanks!
Top of pagePrevious messageNext messageBottom of page Link to this message

bruce
Senior Member
Username: bruce

Post Number: 253
Registered: 07-2002
Posted on Wednesday, February 09, 2011 - 11:05 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Outboards make nice mail box stands.....
Top of pagePrevious messageNext messageBottom of page Link to this message

rbrolfson
New member
Username: rbrolfson

Post Number: 1
Registered: 02-2011
Posted on Monday, February 21, 2011 - 11:34 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have a 1972 chrysler marine corp. military
motor model 2A016 III what was this used to power.
Top of pagePrevious messageNext messageBottom of page Link to this message

collin
New member
Username: collin

Post Number: 1
Registered: 11-2011
Posted on Sunday, November 27, 2011 - 06:16 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have a 2 cycle Industrial Engine by Chrysler Outboard Corp Engine model # 70019 and would like to know what it was designed for. and if it is collectable
Top of pagePrevious messageNext messageBottom of page Link to this message

Ian Manley
Visitor
Posted on Tuesday, January 24, 2012 - 07:56 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have a great 6hp aorox, 1982 Chrysler Hi Thrust 150 long shaft outboard motor and would like to locate a water pump kit for it and a pull start gear to keep as spars can anyone help?
Top of pagePrevious messageNext messageBottom of page Link to this message

joshua63
New member
Username: joshua63

Post Number: 1
Registered: 02-2012
Posted on Friday, February 17, 2012 - 12:59 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have a chrysler outbord corp motor 2 cy 16ci 2a016-III on a military air compresor did this come that way or was the engin on somthing ealse? you can email me directly at [email protected] if that is easier for yall thanks for your time
Top of pagePrevious messageNext messageBottom of page Link to this message

donald
New member
Username: donald

Post Number: 1
Registered: 02-2012
Posted on Saturday, February 18, 2012 - 06:49 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

looking for starter (pawls) /dogs for 3.5 chysler 1986 model pull start!!!
Top of pagePrevious messageNext messageBottom of page Link to this message

joe pokorny
Visitor
Posted on Saturday, March 17, 2012 - 03:40 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have a 1974 Chrysler outboard model 54ha and I do not know the gas oil mixture. I was wondering if anyone knows this. Thanks
Top of pagePrevious messageNext messageBottom of page Link to this message

chplate
Visitor
Posted on Thursday, May 03, 2012 - 12:08 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I looking a model plate, to 5hp chrysler outboard, any numbers no problem. thx. If someone have, write here pls.
Top of pagePrevious messageNext messageBottom of page Link to this message

dmb2828
New member
Username: dmb2828

Post Number: 1
Registered: 05-2012
Posted on Thursday, May 10, 2012 - 03:47 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Hi
I have twinn turbo perkins 6354 engines ifires upn my boat, when I go to start the starboard engine the key turns but do's not connect, it is springy,whhen i cross the starter the engine am getting power to starter, can anyone help.
Top of pagePrevious messageNext messageBottom of page Link to this message

Alvin Burks
Visitor
Posted on Wednesday, May 16, 2012 - 09:39 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have a gas engine on a compressor with a crank rope. Is there a crank assemly that will mount on this unit. It's a NSN 2805-00-068-7510. It's an old 1976 model.
Top of pagePrevious messageNext messageBottom of page Link to this message

wesley_e
New member
Username: wesley_e

Post Number: 1
Registered: 06-2012
Posted on Sunday, June 17, 2012 - 10:27 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

i need ign.parts for 5hp chrysler model #54hd.help please
Top of pagePrevious messageNext messageBottom of page Link to this message

kevinga
New member
Username: kevinga

Post Number: 1
Registered: 07-2012
Posted on Wednesday, July 11, 2012 - 09:27 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

does anyone know where i can find a stator for a 1969 Chrysler 85hp Model 8572 serial 1071.

Any help at all would be amazing, i am not having a lot of luck.
Top of pagePrevious messageNext messageBottom of page Link to this message

Timber Jim
Visitor
Posted on Thursday, December 19, 2013 - 02:31 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Hi, I have a 1976 2 stroke 6HP Chrysler Outboard motor.
I need to replace the plastic pull start coil. It looks as though its attached to the alloy shaft that houses the tension spring so I assume its all the same part. Any ideas of where I can buy one?
Thanks
Top of pagePrevious messageNext messageBottom of page Link to this message

michaellanier
Visitor
Posted on Sunday, January 19, 2014 - 04:20 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

I have an 1971 Chrysler outboard gasoline military. Standard 4cyl. 32cu in. Model 4Ao32-!! . Manual TM-5-2805-203-14&24p. Does anyone know if it has any value or interested in buying it
Top of pagePrevious messageNext messageBottom of page Link to this message

computech
New member
Username: computech

Post Number: 1
Registered: 08-2014
Posted on Friday, August 01, 2014 - 11:56 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Hi there
I have a 1978 Chrysler 75hp outboard
The power trim motor is not working and want to buy a replacement. i found new ones online but they are all asking for the orig part number. All i can find cast into the bottom is 106106, but that number doesn't cross ref to anything so they tell me. Any ideas where i might find the part number? thanks for any help you maybe able to provide.
Top of pagePrevious messageNext messageBottom of page Link to this message

dobieone80
New member
Username: dobieone80

Post Number: 1
Registered: 10-2014
Posted on Friday, October 10, 2014 - 08:11 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Hello,
I was hoping to find out some information on a 1978 Chrysler 4HP outboard motor i have. It is in great working shape and i have no use for it so i was hoping to sell it but not sure what it is worth. It has a plate on it with ID numbers and all that that say.

CHRYSLER MOD: 42H8D
SER #: 10248

4 BHP AT 5250 R.P.M
CERTIFIED BY B.I.A.
FULL POWER SPEED RANGE
4750 TO 5750 R.P.M

It was in my garage when i bought my house and im looking to sell it. Any information someone can share would be greatly appreciated.

thanks!

Top of pagePrevious messageNext messageBottom of page Link to this message

ernie
Senior Member
Username: ernie

Post Number: 1893
Registered: 01-2002


Posted on Saturday, October 11, 2014 - 09:40 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

You will have better luck finding the info you are looking for at Aomci.org the Antique Outboard club.
Hope this helps
Ernie
Top of pagePrevious messageNext messageBottom of page Link to this message

hanshijc
New member
Username: hanshijc

Post Number: 1
Registered: 07-2015
Posted on Friday, July 31, 2015 - 07:56 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Anyone ever heard of a backpack type Skibee fan motor made for skiing made by Chrysler outboard Corp.? I bought one this morning because it was so odd and I had never seen anything like it.
Top of pagePrevious messageNext messageBottom of page Link to this message

oneillj714
New member
Username: oneillj714

Post Number: 1
Registered: 08-2015
Posted on Sunday, August 30, 2015 - 08:54 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

Hello Hanshijc

My grandfather had a Skibee, it ran perfect and was fun to try with cross country skis.

Does your run?
Top of pagePrevious messageNext messageBottom of page Link to this message

hanshijc
New member
Username: hanshijc

Post Number: 2
Registered: 07-2015
Posted on Sunday, August 30, 2015 - 10:25 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Moderator/Admin Only)

oneillj714,

Unfortunately I haven't had time to play with it much. It rolls over and has compression, so I see no reason why it wouldn't. It has to be a riot to run, I'm guessing.

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional.
Password:
E-mail:
Options: Automatically activate URLs in message
Action:

Administration Administration Log Out Log Out   Previous Page Previous Page Next Page Next Page

Home | Classifieds | History | Technical | Links | Store | About Us | Email
&copy 2005 OldMarineEngine.com, P.O. Box 188, Forest Dale, VT 05745-0188 • Phone: 802-247-4864 • All rights reserved.
   Marine Engine Seloc Repair Manual Lookup Tool

marine gas engine repair and restoration