|
| Universal Unimite Four 1956 |
| Author |
Message |
    
Daniel
| | Posted on Monday, May 31, 2004 - 09:41 pm: | 
|
I have a 65 HP Universal Unimite Four in my 1956 Sheppard Ski-Bee, its a 6 volt system...I'd like to rebuild the engine, I could use a full set of gaskets, pistons, rings and valves. Any ideas on where I can find parts? |
james
| | Posted on Sunday, June 13, 2004 - 11:46 am: |
|
Find out what the block would be. With that info you will be able to find those parts easier to find at you local auto parts store. I use NAPA for parts for my Scripps. Good luck.
james |
joe
New member
Username: joe
Post Number: 2
Registered: 02-2005
| | Posted on Thursday, February 24, 2005 - 07:23 am: |
|
I'm not sure if I answered you before. But i do Have a spare Intake and Exhasut manifold for this engine.Have no idea what price to ask.Are you still interested. Joe |
poker casino10
Visitor
| | Posted on Monday, March 06, 2006 - 07:17 pm: |
|
poker casino poker 419 |
joe gartner
New member
Username: joe
Post Number: 3
Registered: 02-2005
| | Posted on Tuesday, March 07, 2006 - 03:37 am: |
|
Daniel I have just completed redoing my 16' Shepherd with a Unimite HFVD engine.This block is the same as the Chris Craft B engine.The parts are all available except they are very expensive.The V-drive can usually be rebuilt. If you need any parts contact me I may have some. I had two engines and only rebuilt one.Contact Mr.B-Bob Sloan in Katy tx. He is the man with Model b parts. Try 281-574-4537 usually about 3 to 7pm their time. Good luck |
|
|
|
|
