Post Number: 37
|Posted on Wednesday, March 21, 2007 - 06:24 am: ||
Any one got any ideas for reattaching the name plate to the cylinder?
Post Number: 91
|Posted on Wednesday, March 21, 2007 - 10:32 pm: ||
Small screws(use rounded flat drive if you can find them for authenticity), drill and tap the casting.
Or use a bit of copper or better still bronze, rod to make some small rivets. You can peen the head over (you may have to anneal a few times). Use some epoxy to secure the rivets in the holes in the casting.