how to find evinrude year for motor

Author Message   Lee Posted on Sunday, May 11, 2003 - 12:09 am:        I would like to know how I can find a year for a motor with the serial and model numbers? where do I go? have checked but getting frustrated!?   Roger DiRuscio Posted on Sunday, May 11, 2003 - 12:25 am:        why dont you post a discription of your motor and the numbers you have, I cant help you with the information you have provided so far Roger   andrew Posted on Sunday, May 11, 2003 - 05:25 pm:        Lee, Check the nameplate on your motor and then go to the following page on the MarineEngine.com site: Evinrude This web site, OldMarineEngine.com is for pre-1940 style inboard engines.   JoeGrzy Jr Posted on Wednesday, June 18, 2003 - 12:25 pm:        when did evenrude stop makiing the elto? the one i have has a plate # 4266 12105 09332 looking for year of motor?   Bruce Posted on Wednesday, June 18, 2003 - 09:14 pm:        Joe, try calling Chris Scratch who lists as a general Evenrude reference in the AOMC directory.519-839-5188.   Joe Mills Posted on Monday, June 21, 2004 - 11:59 am:        I have a Evinrude 2. The plate identifies the model as E2RCOC, and I cannot identify the year from it. Can anyone help?   andrew Posted on Monday, June 21, 2004 - 08:01 pm:        That is a 2HP Rope start Evinrude 1985, the "CO" is 1985 model year. If you need a manual for it I suggest the Seloc Manual. The factory service manual for 1985 covers all the models that year, and would be overkill if all you need is info on a 2HP motor.   chip mason Visitor Posted on Monday, July 26, 2004 - 07:54 pm:        I have an evinrude elto. Tag number 4266 11061 Any info would be helpful Thanks .....   andrew Moderator Username: andrew Post Number: 833 Registered: 11-2001 Posted on Tuesday, July 27, 2004 - 09:14 am:        Chip, Your model number is 4266. The serial number is 11061. That is a 1.1HP Evinrude from 1938-41. We can supply some manuals for at the MarineEngine.com site, and you might be interested in Peter Hunn's OLD OUTBOARD BOOK   garyvanarsdale Visitor Posted on Friday, August 13, 2004 - 08:07 pm:        Can anyone help locate an Evinrude Elto Ace 1.1 hp? Our family would like to purchase one to continue sort of a tradition? Thank you very much.   andrew Moderator Username: andrew Post Number: 850 Registered: 11-2001 Posted on Friday, August 13, 2004 - 09:13 pm:        Gary, You should post a wanted ad in the classifieds section of our affiliated site, MarineEngine.com   chris holden Visitor Posted on Monday, August 16, 2004 - 09:40 pm:        ihave a elto the numbers are 5d10e 17658 could you tell me what year this and if there is a manual available thanks   cash smith Visitor Posted on Saturday, August 21, 2004 - 01:39 pm:        What year evinrude outboard do I have? Serial number is 15014-14618. No model #. On the front of the engine it says fastwin 15. On the side it says evinrude aquasonic. Thanks Cash   andrew Moderator Username: andrew Post Number: 858 Registered: 11-2001 Posted on Saturday, August 21, 2004 - 02:10 pm:        Cash, 15014 is the model number. It is a 1955 15HP. See this link.   Clayton Dobson Visitor Posted on Sunday, September 12, 2004 - 04:13 pm:        TPWD insist I tell them the year of manufacture of Evinrude 4.5 HP, ID E0001069, Model E5RLCIC Can you please help me?   andrew Moderator Username: andrew Post Number: 897 Registered: 11-2001 Posted on Sunday, September 12, 2004 - 04:59 pm:        1981 model year. The "CI" in the model number is "1981 model year".   Jörgen Wildner Visitor Posted on Tuesday, September 28, 2004 - 09:11 am:        Could you find out the model year of my engine. It´s a 90 hp Evinrude Ficht Ram Injection. The label with number E90.... is missing. What I have is the enigine number which is 4980154. Can you please help me?   andrew Moderator Username: andrew Post Number: 914 Registered: 11-2001 Posted on Tuesday, September 28, 2004 - 04:33 pm:        Jorgen, You need the model number to detirmine the year. That "engine number" you provided won't help.   thehobman New member Username: thehobman Post Number: 1 Registered: 09-2004 Posted on Wednesday, September 29, 2004 - 04:50 pm:        hi can you tell me what year this 25 hp motor is Serial #E0671421 Model# E25CUR   andrew Moderator Username: andrew Post Number: 916 Registered: 11-2001 Posted on Wednesday, September 29, 2004 - 05:31 pm:        That is a 1987 model year motor. The "CU" is "1987 model year".   Sheila P. Visitor Posted on Tuesday, October 19, 2004 - 11:01 pm:        Hi, We have a 100hp Evinrude ID: C7070639 Model: E100 MLCSC Can you tell me the year of it please? Thank You   andrew Moderator Username: andrew Post Number: 944 Registered: 11-2001 Posted on Wednesday, October 20, 2004 - 09:39 am:        That is a 1980. The "CS" in the model number is "1980 model year". The "M" is "manual tilt - electric start" The "L" is 20" shaft length.   mike243123 New member Username: mike243123 Post Number: 1 Registered: 10-2004 Posted on Thursday, October 21, 2004 - 10:55 pm:        Need to find out what year evenrude I have. It is a 15 h.p. with the model #E1SRLCNC Any help would be appreciated. Thanks, Mike   andrew Moderator Username: andrew Post Number: 945 Registered: 11-2001 Posted on Friday, October 22, 2004 - 09:17 am:        That model is E15RLCNC not E1SRLCNC Evinrude 15HP Rope start 20" shaft length 1982 model year.   joey Visitor Posted on Friday, November 05, 2004 - 08:44 pm:        I have a model # E35RCSM serial # E0004328. I am having trouble with a year and if an electric start could be installed also any other information would be very helpful and appreciated???   joey Visitor Posted on Friday, November 05, 2004 - 09:16 pm:        hi also it is a tilt arm can i convert to rideguide steering? i do want a decent amount of comfort and convenience without a lot of hidden cost for "extra parts". the motor looks real nice and runs pretty good. its on an alumacraft 15' superhawk.   andrew Moderator Username: andrew Post Number: 961 Registered: 11-2001 Posted on Saturday, November 06, 2004 - 06:14 pm:        Joey, Model number E35RCSM is a 35HP Evinrude Rope Start, 1980 model year. I don't know about adding electric start or "rideguide steering". I suggest that you post those questions in the outboard category of the discussion board at MarineEngine.com, it is a companion site of this one but is focused on more "current" engines. The OldMarineEngine.com site is focused on "early style" marine inboard engines.   Senor Dave Visitor Posted on Tuesday, January 25, 2005 - 07:01 pm:        I have an evinrude super 4 model e100wtp14 and sn j0480219 Can anyone help me with the year and where to find parts.   Brian Riggan Visitor Posted on Tuesday, February 22, 2005 - 07:39 pm:        what are the specs (year, horsepower) on an Evinrude with the serial # : EO4133 and the model # : 9422S?   andrew Moderator Username: andrew Post Number: 1060 Registered: 11-2001 Posted on Tuesday, February 22, 2005 - 07:53 pm:        Brian, This website is really for "inboards" not "outboards", but that model number 9422S is a 9.5HP from 1964. See this link.   andrew Moderator Username: andrew Post Number: 1061 Registered: 11-2001 Posted on Tuesday, February 22, 2005 - 07:57 pm:        senor dave, Your question above... I think you have the model number wrong. That is a 100HP commerial model, but the last two digits probably aren't "14". If it is 100WTPLG it would be 1993.   shawn Visitor Posted on Saturday, June 18, 2005 - 07:57 am:        i just bought an evinrude 30hp mod.no.ce30elcoa could anyone tell me the year? thanks ss   andrew Moderator Username: andrew Post Number: 1157 Registered: 11-2001 Posted on Saturday, June 18, 2005 - 11:06 am:        That is a 1985 model year. The "co" is "1985 model year". You can ask outboard questions on the discussion board at MarineEngine.com .   ricky Visitor Posted on Saturday, July 09, 2005 - 12:00 am:        not sure what the motor is but numbers are model 5567E serial A306983 i think evinrude hope some can help thanks   andrew Moderator Username: andrew Post Number: 1169 Registered: 11-2001 Posted on Saturday, July 09, 2005 - 09:00 am:        Ricky, Could it be 55673 instead of 5567E ? 55673 is Evinrude 55HP, 1976. See this link.   Shaun M Visitor Posted on Sunday, July 10, 2005 - 10:23 pm:        Hello! I am curious as to what year my evinrude outboard is, and what would be the recommended manual. I can not find anything on the web about this, so you're my last hope here. The Model Number is listed as E30ELCED. Thanks for any help you can give!   Michael Visitor Posted on Saturday, July 16, 2005 - 11:33 pm:        Hello all! I'm looking for my boat motor year as well. The numbers on the plate is a little worn, but here is what I've got. Model - E10ECCD. Serial - ??714690. Any help is GREATLY appreciated. Thanks!   andrew Moderator Username: andrew Post Number: 1174 Registered: 11-2001 Posted on Sunday, July 17, 2005 - 09:24 am:        Michael, That is a 9.9HP, 1988. The "CC" is "1988 model year". You can use the board at MarineEngine.com for other outboard related questions. Regards, Andrew   andrew Moderator Username: andrew Post Number: 1175 Registered: 11-2001 Posted on Sunday, July 17, 2005 - 09:26 am:        Shaun, I missed your previous question above. E30ELCED is a 30HP Electric Start, 1989 model year. Regards, Andrew   CHARLIE MILLER Visitor Posted on Saturday, September 10, 2005 - 04:35 pm:        HI, I AM TRYING TO DETERMINE THE YEAR OF MANUFACTURE OF AN EVINRUDE BIG TWIN AQUASONIC 25 HP WHISPERING POWER OUTBOARD. MODEL AND SERIAL NUMBERS APPEAR TO BE 75920-06597 . THANKS FOR YOUR ASSISTANCE AND GREAT RESOURCE.   andrew Moderator Username: andrew Post Number: 1196 Registered: 11-2001 Posted on Saturday, September 10, 2005 - 05:10 pm:        Charlie, Are you sure about that model number "75920"...? Could it be "25920"? If so it would be 25HP, 1955. This site is really for old "inboards", not "outboards". You could try the board at our other site, MarineEngine.com for other outboard questions and manuals for outboard motors.   larry lisitza Visitor Posted on Friday, October 07, 2005 - 08:52 pm:        i have a12hp elto model 12012Ldoes anyone know whatyear it is and were i can get parts   Johno Visitor Posted on Sunday, October 23, 2005 - 08:52 am:        Hi there - my evinrude has the model no E5RLCIC. Can ayone tell me the year and whether it indicates long or standed shaft. I have always assumed it was long shafted as that it was how it was sold to me. Measures 44" from tip of skeg to top of cowl. Ta   andrew Moderator Username: andrew Post Number: 1227 Registered: 11-2001 Posted on Sunday, October 23, 2005 - 09:41 am:        R = Rope Start L = Long Shaft CI = 1981 C = Model run during that year, not critical. If you need manuals see this link.   Gforce421 Visitor Posted on Thursday, January 26, 2006 - 03:09 am:        Hi all need some help please... I have a 40 HP twin Evinrude, dark blue motor covers and i cant find a engine nameplate on it. The only numbers I can find are on a raised casting about 1 inch in size which are * 30475 ... and another number on a plug (looks like a welsh plug) on the top of the motor which is G3606376 any help would be good thanks, I was told it might be a late 70's unit   dhwright New member Username: dhwright Post Number: 1 Registered: 01-2006 Posted on Tuesday, January 31, 2006 - 10:51 pm:        I have a 1969 Evinrude 4hp lightwin. It is in good shape except for a stripped oil filler screw in the lower unit. Will the lower unit from a 1972 4hp Evinrude be interchangable? I can pick up a 1972 4hp for little cost that has a good lower unit. Thanks.   andrew Moderator Username: andrew Post Number: 1368 Registered: 11-2001 Posted on Wednesday, February 01, 2006 - 05:40 pm:        Gforce421: Are you sure about the numbers you posted? The "30475" is close but not quite right. You can see what the pre-1980 evinrude numbers for a 40HP should be at this link. ********* dhwright: You might be better off asking that question in the Johnson/Evinrude cateogry of the board at MarineEngine.com. This site, OldMarineEngine.com, is focused on old "inboards", not outboards. I'm sure that anyone here that could help you would be happy to, but outboards are not the field of expertise for most of the regulars here. The board on MarineEngine.com is a similar format to this one, so you should have no trouble posting. But you should post your question as a "new discussion" instead of adding it onto an existing thread of messages as you did here. You will see a "start new discussion" link in the blue bar at the top and bottom of the categories.   Robert Baum Visitor Posted on Tuesday, February 14, 2006 - 08:53 am:        I have an Evinrude motor - with the slide bar throttle on the front - around an early 50's model with the numbers 7512-U8544 and Fleetwin oin the side, gas tank on the engine. Looks like a 3hp model but someone told me it was a 7-1/2 hp. I don't think so   andrew Moderator Username: andrew Post Number: 546 Registered: 11-2001 Posted on Tuesday, February 14, 2006 - 08:58 am:        Robert, Your model number is 7512. That is a 7.5HP from 1953. See this link.   NICK BUTTERA Visitor Posted on Saturday, February 25, 2006 - 12:14 am:        I HAVE A 1963 EVINRUDE LARK 6 BIG TWIN IM LOOKING FOR MORE INFO ON TRADE VALUE OR WHERE THE BEST PLACE TO SELL IT MIGHT BE. LOOKING TO UPGRADE. THANKS   andrew Moderator Username: andrew Post Number: 565 Registered: 11-2001 Posted on Saturday, February 25, 2006 - 11:41 am:        You can post it for sale in the classifieds at MarineEngine.com.   GARY BLUNK Visitor Posted on Wednesday, March 08, 2006 - 04:13 pm:        I HAVE JUST GOT A 1970 SOMETHING EVINRUDE 6HP MOTOR FROM A FRIEND AND IT HAS NO MODEL# PLATE ON IT , IT HAS A NAME ON THE COVER (FISHERMAN) WERE COULD I FIND THE MODEL# AND SER.# ON THE BODY THANK YOU   BREW_SARD1 Visitor Posted on Thursday, March 09, 2006 - 10:07 am:        HELLO, I HAVE AN 1979 EVINRUDE SUPER 55, AND I'D LIKE SOME INFO ON IT. I'M INTERESTED IN WHY IT HAS THE LARGE FOOT, AND WHAT THE DIFFERENCE IS BETWEEN IT AND THE REGULAR 55. I APPRECIATE ANY INFORMATION. THANKS, SHANE   andrew Moderator Username: andrew Post Number: 578 Registered: 11-2001 Posted on Thursday, March 09, 2006 - 05:56 pm:        Gary, The model number should be on a nameplate on the mounting bracket, or stamped into a freeze plug or the flywheel. See possible numbers here. Brew, You will need the to find the model number on the motor also. This site is really for old "inboard" engines, you can get more info on outboards on the discussion board at marineengine.com.   gary blunk Visitor Posted on Friday, March 10, 2006 - 02:25 pm:        the only number is on the flywheel 580562 with a G over the number there is no number on the freeze plug or the plate is not on the mounting bracket   brian m Visitor Posted on Tuesday, March 14, 2006 - 01:03 am:        i own a 1993 evinrude 15hp.any one had problems with motor mount bolts breaking off in tiller handle?   andrew Moderator Username: andrew Post Number: 583 Registered: 11-2001 Posted on Tuesday, March 14, 2006 - 08:04 am:        Brian, You should post that question on the MarineEngine.com Board instead. This board, OldMarineEngine.com, is for early style inboard engines.... Thanks.   dennis bourne Visitor Posted on Monday, March 20, 2006 - 07:46 pm:        can you tell me the year of my johnson outboard motor with a 6 horse power. Model number 6r71g. serial number j3386651   andrew Moderator Username: andrew Post Number: 595 Registered: 11-2001 Posted on Tuesday, March 21, 2006 - 07:52 am:        Dennis, That is a 1971, 6HP, see this link We also now offer some Johnson parts on the MarineEngine.com site, see this link   chulo oso Visitor Posted on Friday, March 24, 2006 - 02:58 pm:        i don't know what model of motor i have but if any one can tell me what year and ect from serial number 823-853 IT IS A 110 HP. V4 AND I ONLY FOUND THAT NUMBER NEXT TO THE LETTER R. NUMBER IS R823-853   Catherine Somer Visitor Posted on Friday, March 24, 2006 - 03:52 pm:        I have what appears to be a 4 hp evinrude long-shaft, model: E4BRHLCOB, serial #: B100356. Can someone tell me what year it is? I am trying to sell it. It's my dad's and he doesn't remember much about it. Also does anyone know the price range? Thanks.   andrew Moderator Username: andrew Post Number: 603 Registered: 11-2001 Posted on Friday, March 24, 2006 - 04:45 pm:        Chulo, That doesn't look like a Johnson / Evinrude number... what kind of motor is it? Catherine, That is a 1985 model year motor. You can check the price guide on MarineEngine.com at this link. You can post it for sale in the classifieds   chulo oso Visitor Posted on Friday, March 24, 2006 - 10:58 pm:        my motor is a evinrude 110hp v4. i read the number off the top of the motor where the number 1 spark. So it says on the cover   chulo oso Visitor Posted on Saturday, March 25, 2006 - 10:17 am:        ok. i forgot a number. lol. let me see if i can get it right this time. 110hp v4. cover says evinrude. top of motor where the number 1 spark plug reads R8235383. if any one can tell me the year and model and where i can look it up, i would really appreciate it. I have always wanted a boat and i need this info to register it. please. lol   andrew Moderator Username: andrew Post Number: 607 Registered: 11-2001 Posted on Saturday, March 25, 2006 - 04:00 pm:        Chulo, You need the model number (the number you supplied is not the model number), which should be found on a nameplate on the mounting bracket. Once you have found it see this link: model number code 1980 and up   chulo oso Visitor Posted on Saturday, March 25, 2006 - 05:47 pm:        I don't have the little nameplate. i guess i have narrowed it down to only year 86-89. possible models E110TLCD year 86, E110TXCU 87, E110MLCU 87, E110TXCC 88, E110MLCC 88, E110MLCE 89, E110TXCE 89. Found this out at nadaguide.com   matty Visitor Posted on Monday, April 03, 2006 - 06:18 am:        iam trying to remove the drive shaft from a ~1976 55 hp evinrude have the water pump ass. off and the bearing retainer removed also the top shell of the tappered bearing how do you get the shaft out??   PABoater Visitor Posted on Monday, April 03, 2006 - 02:33 pm:        I have an Evinrude 9.9 Serial E0595803 Model 10RCDB Can anyone tell me what year this is ? Thanks   Koby Reitz Visitor Posted on Thursday, April 06, 2006 - 02:11 pm:        My uncle has an old Evinrude Fastwin and I would like to know the year model and horsepower to find a repair manuel. The numbers I found on the plate on the mounting bracket are: 18502S-E05166. Can anyone help me from here? Thanks!   andrew Moderator Username: andrew Post Number: 624 Registered: 11-2001 Posted on Thursday, April 06, 2006 - 02:55 pm:        18502S is 18HP, 1965. See this link. and for manuals use this link and for parts use this link.   Mark Menton Visitor Posted on Sunday, April 09, 2006 - 01:52 pm:        Hi I have a evinrude big twin 40hp. model number 1919634 I need to find the year. Any ideas? Thanks   andrew Moderator Username: andrew Post Number: 631 Registered: 11-2001 Posted on Sunday, April 09, 2006 - 08:02 pm:        Mark, Are you sure about that model number? It doesn't appear to be right. See this link   sea New member Username: sea Post Number: 1 Registered: 04-2006 Posted on Monday, April 10, 2006 - 01:55 pm:        Looking for the model year for an evinrude, 15hp short shaft manual start tiller engine. Model: E15RCOB Serial Number: EO492657 Can anyone help me?   andrew Moderator Username: andrew Post Number: 632 Registered: 11-2001 Posted on Monday, April 10, 2006 - 02:03 pm:        That is a 1985. The "CO" in the model number is "1985 model year". See this link For parts, see this link PS: This website is really for old "inboards"... not outboards. For outboard questions try the board at MarineEngine.com   gkm24 New member Username: gkm24 Post Number: 1 Registered: 04-2006 Posted on Sunday, April 23, 2006 - 10:23 am:        Hi. I have 2 Evinrude engines one is a 4Hp and the other is a 6Hp. Both are twin cylinders. The 4Hp has no tag on the transom mount. How would I obtain the model and serial number? the 6Hp has the model and serial as follows: Model 69866e (the third digit could be a B instead of an 8) Serial B037953. please can you tell me the year of the 6Hp so that I can hopefully get a manual to cover both of them. Thanks very much.   andrew Moderator Username: andrew Post Number: 641 Registered: 11-2001 Posted on Sunday, April 23, 2006 - 11:14 am:        Are you sure about the model number 69866E ? That doesn't match up (nor if it was B instead of 8). See this link. Some of the older Evinrudes have the model number stamped into a freeze plug or into the flywheel.   gkm24 New member Username: gkm24 Post Number: 2 Registered: 04-2006 Posted on Sunday, April 23, 2006 - 11:52 am:        I'm sure that it is correct as I made a special note to be accurate but I was running late for work so I will recheck. I thought it strange as I looked at all the links to engine codes and they did'nt make sense to me either. I may have missed some letters if they were standard for the tag and not stamped into it like the rest. I will return tomorrow after i recheck. Thanks for responding.   gkm24 New member Username: gkm24 Post Number: 3 Registered: 04-2006 Posted on Monday, April 24, 2006 - 02:32 pm:        Just to let anyone know with a 6Hp Evinrude with the same code, 69B66E is 1979.   kevin peterson Visitor Posted on Wednesday, May 10, 2006 - 06:54 pm:        Yes i would like to know what year my outboard is? Its a 9.9 evinrude with the model number 10524c and serial number e0002048 thanks kevin   Frank Jr. Visitor Posted on Wednesday, May 17, 2006 - 12:42 pm:        Hi, I have a 9.9 Evenrude. The ID plate is missing and I would like to know how old it is. On the side of the block is the # 319350. The coils have # 532106N9 on them. The fuel pump/filter is # 329972. Can you tell me what year it is? Frank   Richard Visitor Posted on Tuesday, May 30, 2006 - 09:26 pm:        Hi i have a evinrude lark 40 hp could you please let me know what year it is? serial no. 2409835520 thanks Richard   darrell Visitor Posted on Saturday, July 01, 2006 - 12:45 am:        hi i have a 25 hp evinrude i need to find out the year of my motor b/c im not getting any fire i need to know the year so i can purchase the proper parts for it. serial no.E0003770 model no.25602E   Steve Strupp Visitor Posted on Sunday, July 30, 2006 - 01:08 pm:        I have a Evinrude Lightwin model # 4106D-E04464. What year is the motor? Help!!   andrew Moderator Username: andrew Post Number: 693 Registered: 11-2001 Posted on Sunday, July 30, 2006 - 01:45 pm:        Kevin: 10524C is a 9.9HP from 1975 Frank: Those numbers aren't going to help. You could try posting a picture of it on the board at MarineEngine.com. Richard: That serial number doesn't look right. It should be similar (or at least the beginning of it) to the ones here. Darrell: That is a 25HP 1976. Steve: Is that a 5HP ? If so it's a 1935. If it is 4HP then it's 1971. See parts and manuals here.   Steve Strupp Visitor Posted on Sunday, July 30, 2006 - 02:52 pm:        Andrew: it is a 4hp so it would be a 1971. Thanks for the Info   steve strupp Visitor Posted on Monday, August 07, 2006 - 08:35 pm:        My 1971 Evinrude lightwin 4HP, model4106D does not have any spark. I would like to test the coils. What reading should I look for on the ohm meter   jerrykoz Visitor Posted on Wednesday, August 09, 2006 - 10:39 am:        i have a 1955 15 h.p. evinrude whisper power aquasonic . calls for a j6j plug. what is the proper gap?   Phil Gardner Visitor Posted on Saturday, August 12, 2006 - 11:00 am:        I have an Evinrude JR - Model # is EJRCDR and the serial # is B0109004. Can someone tell me the year it was made, what did it sale for new. Any other information would be appreciated. Thanks, Phil   andrew Moderator Username: andrew Post Number: 706 Registered: 11-2001 Posted on Saturday, August 12, 2006 - 01:25 pm:        Phil, That is a 1986. I don't know what it sold for new. See this link for some of the parts.   Phil Gardner Visitor Posted on Saturday, August 12, 2006 - 02:05 pm:        Thanks for the information Andrew, but according to everything I have seen, the serial number is a different format the anything produced after 1980? That's why I thought if must be older?   Paul Witte Visitor Posted on Sunday, August 20, 2006 - 09:04 am:        Sir, I have a 75 Johnson Seahorse, model number V4AL-15E, Ser # 2363704. Could you tell me the year please. Thank you in advance.   chuck1973 Visitor Posted on Sunday, August 20, 2006 - 08:55 pm:        I have a Super ELTO with number 3190001 stamped on it. I am assuming it is the serial number can anyone give me some info it thanks Chuck   Frank Jr. Visitor Posted on Tuesday, August 22, 2006 - 10:29 pm:        Hi, I have a 9.9 Evenrude. The ID plate is missing and I would like to know how old it is. On the side of the block is the # 319350. The coils have # 532106N9 on them. The fuel pump/filter is # 329972. Can you tell me what year it is? Frank   eric Cohrs Visitor Posted on Friday, December 08, 2006 - 09:20 pm:        i have an old evinrude outboard model# 9422s and serial# eo8611 what year is the motor and what kind of compression does it have to have to run? where can i get parts for it at? thanks eric   ernie Senior Member Username: ernie Post Number: 514 Registered: 01-2002 Posted on Saturday, December 09, 2006 - 05:06 pm:        It's a 1964 9.5 hp short shaft. If you try to turn the flywheel with your hand on the outer diameter it should be hard to turn through top dead center. Both cylinders should feel the same. Just about all parts are still available through your local Evinrude or Johnson Dealer. I just reconditioned 3 of them and had no trouble getting parts from my local dealer. If you are anywhere near Southeastern Mass I may be able to help you. Hope this helps Ernie   gmusicka Visitor Posted on Monday, February 12, 2007 - 01:40 am:        ive got a 55hp evenrude model number 55972 searial number jo1335 would like to know how old it is and if i can still get parts for it . ps its a 3 cylinder. many thanks.   andrew Moderator Username: andrew Post Number: 844 Registered: 11-2001 Posted on Monday, February 12, 2007 - 09:04 pm:        55972 is a 55HP from 1969. You can look for parts here. and here. and for manuals here.   STEPHEN HARRIS Visitor Posted on Wednesday, February 14, 2007 - 02:58 pm:        i have an evinrude 50 hp outboard model no E50 ORNLIC can anyone tell me the year many thanks steve   andrew Moderator Username: andrew Post Number: 845 Registered: 11-2001 Posted on Wednesday, February 14, 2007 - 03:03 pm:        Stephen, Are you sure you are reading that model number correctly? Are you reading it right from the nameplate?   Gary edwards Visitor Posted on Monday, March 19, 2007 - 12:56 pm:        Please can anyone help with the year of my evinrude outboard the model number is AE50TLCEC and the serial number is G02270028 THANKS.   mike wanek Visitor Posted on Thursday, April 05, 2007 - 07:52 pm:        I have an old evinrude 3 horse from the 50's the serial number is 3012-34917. I'm looking for the exact year   Andrew Condie Visitor Posted on Friday, April 06, 2007 - 05:16 am:        thats a 1952 3hp model. That model was the first of the 3hp's and later on became the 4hp. That design has been used by Evinrude/Johnson ever since with very few internal changes. One of if not "the" best small motors ever produced, by any manufacturer.   Jerry Plaisier Visitor Posted on Monday, April 09, 2007 - 11:42 am:        I am looking for the year and horsepower of an Evinrude boat motor with the serial number 6502M-E13271. Thanks, Jerry   RWHIT46684 Visitor Posted on Friday, April 20, 2007 - 08:32 am:        I have a Johnson outboard motor with the ser.# J2889940 mODEL# M0-14E CAN YOU HELP ME WITH THE YEAR OF THIS MOTOR THANKS   Jeepnut666 Visitor Posted on Sunday, April 22, 2007 - 08:34 pm:        Hi just wondering what year my rude is.... E25RCOS s/n E0515282 25 hp need tiller plate the tiller arm broke at the loops for the arm to tilt up and down.. sorry frazzled. Thanks. Jeepnut666   andrew Moderator Username: andrew Post Number: 872 Registered: 11-2001 Posted on Sunday, April 22, 2007 - 08:52 pm:        RWHIT46684, It is probably MQ-14E not MO-14E. That would be 9.5HP from 1968. See this link for manuals. Jeepnut666, E25RCOS is a 1985 25HP Rope Start. You can look at the parts diagrams from the link here.   steve august Visitor Posted on Friday, April 27, 2007 - 10:32 pm:        what is the differnce in a 1975 Johnson, 70hp and a 75hp? thanks steve}}   tfran605 Visitor Posted on Sunday, April 29, 2007 - 06:01 pm:        i just bought a evinrude 6hp and thet M# dose not like like any other ones that i have seen befor. just wanted to know the year of it the the M# is 6504R and the S# J0006390   Brian Kramer Visitor Posted on Sunday, April 29, 2007 - 10:38 pm:        I have a 4.5 hp Envinrude and want to know the year. Model # is JBF4P and serial # is H 0180867. Thanks Brian   Mike Sanyk Visitor Posted on Monday, April 30, 2007 - 10:09 pm:        I have an Evinrude Elto Ace, Model number 4351-06046. The tank is dented, the tiller handle broken and the transom clamp is missing the swivel head. The skeg is undamaged and it has a prop. Anyone interested in this motor for rebuild or parts can contact me by e-mail   Kevin Daly Visitor Posted on Saturday, May 12, 2007 - 03:34 pm:        I have a Evinrude outboard that I am trying to get running. Old Marine motors.com says it is a 1941 3.3 H.P. Can anyone tell me what the point gap and fuel ratio is supposed to be? Thanks Kevin   jeff stallkamp Visitor Posted on Saturday, May 12, 2007 - 09:08 pm:        Model 1509490 serial J0002892 Can you tell me what year this is? Evinrude 150 HP outboard   andrew Moderator Username: andrew Post Number: 874 Registered: 11-2001 Posted on Saturday, May 12, 2007 - 09:28 pm:        tfran605: 6504R is a 6HP 1975. Brian: I don't think JBF4P is a valid model number. Mike: 4351 is a 1.8HP from 1940-41. You could post it for sale in our classifieds. Kevin: Manuals for that 1941 3.3HP are available. Jeff: 1509490 is a 150HP 1979.   Heath Visitor Posted on Sunday, May 13, 2007 - 03:05 pm:        i have a evinrude 6HP 1971.its model number is 6102G...i was wondering what "G" meant thanks   David Reyes Visitor Posted on Saturday, May 19, 2007 - 06:34 pm:        I have a 60 HP Evinrude model E60TTLESM, serial number G 02578160. Can anyone help me in determining what year this engine is?   andrew Moderator Username: andrew Post Number: 876 Registered: 11-2001 Posted on Saturday, May 19, 2007 - 07:19 pm:        Heath, The "G" is probably just the run within that model year. Not relevant for anything now. David, Model E60TTLESM is a 1990. See this link.   vastri Visitor Posted on Sunday, June 24, 2007 - 05:47 pm:        dear friends the numberplate on my 4 hp evinrude contains the following number 4136D B11026 which I cannot trace on relevant site. I would appreciate if you could identify the year and certain other details as thew cowl is missing and I'm trying to find one Thanks in advance.   manu New member Username: manu Post Number: 1 Registered: 07-2007 Posted on Tuesday, July 10, 2007 - 02:05 pm:        please help me finding the year of a 25 hp evinrude outboard engine.the numberplate contains this 256B62E B 9161.Thank you so much   durwood New member Username: durwood Post Number: 1 Registered: 07-2007 Posted on Thursday, July 19, 2007 - 08:55 am:        I have an Evinrude Lark V Selectric Shift, model # 43073D. I have not been able to find this model # from any of the lists provided. I'd like to know the year built and any other info. Thanks.   qtamo Visitor Posted on Sunday, July 29, 2007 - 05:05 pm:        I'm buing a 20 HP Evinrude, and all I know is a serial number: b-32081 Any idea what year this might be?   Roger Ward Visitor Posted on Monday, July 30, 2007 - 02:56 pm:        Hi. We just bought a 1970 boat with an Evinrude 25 hp motor. The serial or model number is 25102S or 251025, there is another number: E06126. We don't know if the motor is the first one for that boat or many of several, but one site I looked at indicated the motor to be a 1971. Can you verify this so we can find the right parts list? Thanks so much.   christine Visitor Posted on Thursday, August 09, 2007 - 10:11 am:        I need to find out the year of my engine the serial number is 212909 model number217-58880 its a sears roebuck. any info would be great   colleen New member Username: colleen Post Number: 1 Registered: 08-2007 Posted on Monday, August 13, 2007 - 01:16 pm:        Have an Evinrude 4hp, 2 stroke. Model # E4RDHCDE, serial # B0100804. What year is it? Thanks for your help!   Julio Ejey Visitor Posted on Tuesday, August 28, 2007 - 07:14 am:        Hello, I have a Evinrude Big Twin 40hp engine, I think its from around 1960s, but not sure. Where can I find Its serial number, cant seem to find it anyware! Thanks!   kevin saulnier Visitor Posted on Sunday, September 02, 2007 - 07:38 pm:        hi i have an evinrude jr i think it"s a 1964 model#cejrcdr serial#b0100200 i would like to know what is the hp of this motor please. thank you   billsfan90294 New member Username: billsfan90294 Post Number: 1 Registered: 12-2007 Posted on Sunday, December 09, 2007 - 02:25 pm:        I have a 40 HP Evinrude that I can not find a model number on it. I really need to find the year and model number. It is a 2 CYL 40 HP with Serial number 11928 Can Someone please Help. Thanks   andrew Moderator Username: andrew Post Number: 899 Registered: 11-2001 Posted on Sunday, December 09, 2007 - 02:50 pm:        Bill, The serial number won't identify it. The model number should be on the same nameplate where you found the serial number. You haven't said "approximately" what year it is, but see pre-1980 model numbers here.   Vincent T Visitor Posted on Tuesday, February 05, 2008 - 03:42 pm:        I have a 1962 40hp Evinrude mod.35932L, need info on this motor, looking for a cowl cover for it. Is it a Lark 111 or Lark 1v, electric shift or standard   Chad Visitor Posted on Saturday, February 16, 2008 - 03:29 am:        I have a 100 Horsepower outboard Evinrude electric start/trim. There are no nameplates or identifying placards. I have found various numbers stamped on different parts of the engine/mounting bracket/shaft but found no relevance to serial number. Was told it is a mid-90's model but want to verify for maintenance manual purposes. PLEASE HELP!!!!!!!! Aloha, Chad   Songman07 Visitor Posted on Sunday, February 17, 2008 - 04:58 pm:        I have an evinrude motor Model # e2rcoc or maybe ezrcoc can you tell me the year and the horse power this motor thanks   doug thomasson Visitor Posted on Wednesday, February 20, 2008 - 10:21 pm:        I have a 48hp evinrude, model E48ESLEDS. I was told to use "INTRODUCES" as the code representing nos. 1234567890. The ED would make it a 1996, is this correct? Also, what ratio of oil to gas? Thanks, Doug T.   Bob Curtiss Visitor Posted on Monday, March 31, 2008 - 09:27 pm:        I am considering purchasing a 1993 Evenrude 70hp that is in excellent condition along with a Striper 18' 1993 boat, trailer, etc. The owner says the motor runs out to 5500 rpm and gives the boat about 25mph top speed. Does anyone know if a slightly larger or pitched prop - dropping the rpm to say 5000rpm would increase the speed of the boat? Thanks, Bob   miro Senior Member Username: miro Post Number: 319 Registered: 11-2001 Posted on Tuesday, April 01, 2008 - 12:41 pm:        With that combination of HP, boat length, and top speed, you're doing about right - best way to increase speed is make the boat lighter. A change of 100lbs can make a big difference. The placement of weight in the boat also affects top speed. The flatter the angle to the water, the less wetted area and the faster it will go. But I doubt that you'll see anything major - not more than 3%-5% improvement - plus you'll be guzzling fuel at top speed miro   quigley__1@hotmail.com Visitor Posted on Tuesday, April 01, 2008 - 09:57 pm:        Thanks Miro, your information is very well taken! Bob   quigley__1@hotmail.com Visitor Posted on Wednesday, April 02, 2008 - 09:48 pm:        Is the 70hp Evenrude enough motor for the 18' Striper boat? I don't mind 25mph as we're not interested in going faster unless we can do so with the existing engine. Also would a larger engine with higher top end be more costly gas wise than the 70hp if we got it up on plane and cruised at 20mph? Just checking before I buy. Thanks, Bob   cliff hixson Visitor Posted on Wednesday, May 28, 2008 - 09:36 pm:        looking for year and hp of old evinrude. the numbers i found are 25526 10883.The engine cover has the name Lark.   ARTHUR RAMIREZ Visitor Posted on Saturday, June 21, 2008 - 04:56 pm:        EVINRUDE 9.9 MODEL E1ORCID SERIAL NO. EOOO2053 WOULD LIKE TO KNOW YEAR HAVING TROUBLE STARTING AS STARTING POINT ON THROTTLE I NO LONGER VISABLE THANK YOU   andrew Moderator Username: andrew Post Number: 933 Registered: 11-2001 Posted on Saturday, June 21, 2008 - 05:36 pm:        E10RCID is a 1981 rope start. This board is for antique style inboard engines. You should ask questions about that Evinrude outboard on the MarineEngine.com board in the Johnson/Evinrude category. Thanks.   ranger New member Username: ranger Post Number: 1 Registered: 06-2008 Posted on Wednesday, June 25, 2008 - 03:22 pm:        I have a 1979 55hp Evinrude, model #55975C. Could anyone tell me what the "C" stands for at the end. Thanks.   Bill Tillack Visitor Posted on Friday, June 27, 2008 - 12:23 am:        I thinking of purchasing a 9.5 evinrude/johnson sportwin outboard motor model# 9822e serial # E08048 what year is this? Are parts still accessible? thanks Bill   ranger New member Username: ranger Post Number: 2 Registered: 06-2008 Posted on Saturday, June 28, 2008 - 11:25 am:        Bill Tillack, Evinrude 9.5 Model 9822E = 1968 http://www.marineengine.com/manuals/evinrude/ Sure, just search the internet, parts are everywhere.   phillip m. oels Visitor Posted on Tuesday, July 08, 2008 - 01:56 pm:        need help identifying a 15 hp evinrude outboard. model 15804b, serial#e0006256---thanks, phil   ranger New member Username: ranger Post Number: 3 Registered: 06-2008 Posted on Thursday, July 10, 2008 - 05:31 pm:        Phil, It is a 1978.   chillyattitude Visitor Posted on Sunday, July 20, 2008 - 12:08 am:        trying to find the year of a 50 hp evinrude... model # E50BELC0B Serial # J0539352   andrew Moderator Username: andrew Post Number: 934 Registered: 11-2001 Posted on Sunday, July 20, 2008 - 10:13 am:        That is a 1985. The "CO" in the model year is 1985. You can get parts and manuals for that motor from the MarineEngine.com website.   jodi New member Username: jodi Post Number: 1 Registered: 08-2008 Posted on Friday, August 01, 2008 - 12:50 pm:        Hi, I just received an evinrude engine and I have no idea what year it is. Please help Model no. 652735 Serial no. 62119   terry g smith Visitor Posted on Tuesday, September 02, 2008 - 05:31 pm:        can someone plz tell me the value of an evinrude motor with the serial number 3012-48900   Gerard Krause Visitor Posted on Monday, September 08, 2008 - 12:12 pm:        I have an Evinrude 8 HP, model E8R CEC, S/N B1953181. I have been told it is a 1989. Can that be confirmed by the S/N?   REX KENNEDY Visitor Posted on Monday, September 08, 2008 - 02:18 pm: